diff mbox series

[v8,01/10] dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings

Message ID 20200512125327.1868-2-georgi.djakov@linaro.org (mailing list archive)
State New, archived
Delegated to: viresh kumar
Headers show
Series Introduce OPP bandwidth bindings | expand

Commit Message

Georgi Djakov May 12, 2020, 12:53 p.m. UTC
From: Saravana Kannan <saravanak@google.com>

Interconnects often quantify their performance points in terms of
bandwidth. So, add opp-peak-kBps (required) and opp-avg-kBps (optional) to
allow specifying Bandwidth OPP tables in DT.

opp-peak-kBps is a required property that replaces opp-hz for Bandwidth OPP
tables.

opp-avg-kBps is an optional property that can be used in Bandwidth OPP
tables.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
v8:
* Picked reviewed-by tags.
* Changes on wording.

 Documentation/devicetree/bindings/opp/opp.txt   | 17 ++++++++++++++---
 .../devicetree/bindings/property-units.txt      |  4 ++++
 2 files changed, 18 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 68592271461f..9d16d417e9be 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -83,9 +83,14 @@  properties.
 
 Required properties:
 - opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
-  required property for all device nodes but devices like power domains. The
-  power domain nodes must have another (implementation dependent) property which
-  uniquely identifies the OPP nodes.
+  required property for all device nodes, unless another "required" property to
+  uniquely identify the OPP nodes exists. Devices like power domains must have
+  another (implementation dependent) property.
+
+- opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as an array
+  of 32-bit big-endian integers. Each element of the array represents the
+  peak bandwidth value of each interconnect path. The number of elements should
+  match the number of interconnect paths.
 
 Optional properties:
 - opp-microvolt: voltage in micro Volts.
@@ -132,6 +137,12 @@  Optional properties:
 - opp-level: A value representing the performance level of the device,
   expressed as a 32-bit integer.
 
+- opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as an array
+  of 32-bit big-endian integers. Each element of the array represents the
+  average bandwidth value of each interconnect path. The number of elements
+  should match the number of interconnect paths. This property is only
+  meaningful in OPP tables where opp-peak-kBps is present.
+
 - clock-latency-ns: Specifies the maximum possible transition latency (in
   nanoseconds) for switching to this OPP from any other OPP.
 
diff --git a/Documentation/devicetree/bindings/property-units.txt b/Documentation/devicetree/bindings/property-units.txt
index e9b8360b3288..c80a110c1e26 100644
--- a/Documentation/devicetree/bindings/property-units.txt
+++ b/Documentation/devicetree/bindings/property-units.txt
@@ -41,3 +41,7 @@  Temperature
 Pressure
 ----------------------------------------
 -kpascal	: kilopascal
+
+Throughput
+----------------------------------------
+-kBps		: kilobytes per second