| Message ID | 20200528192051.28034-12-andrzej.p@collabora.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Stop monitoring disabled devices | expand |
28. Mai 2020 21:22, "Andrzej Pietrasiewicz" <andrzej.p@collabora.com> schrieb: > set_mode() is only called when tzd's mode is about to change. Actual > setting is performed in thermal_core, in thermal_zone_device_set_mode(). > The meaning of set_mode() callback is actually to notify the driver about > the mode being changed and giving the driver a chance to oppose such > change. > > To better reflect the purpose of the method rename it to change_mode() > > Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> > --- > drivers/platform/x86/acerhdf.c | 6 +++--- Acked-by: Peter Kaestle <peter@piie.net>
On 5/28/20 9:20 PM, Andrzej Pietrasiewicz wrote: > set_mode() is only called when tzd's mode is about to change. Actual > setting is performed in thermal_core, in thermal_zone_device_set_mode(). > The meaning of set_mode() callback is actually to notify the driver about > the mode being changed and giving the driver a chance to oppose such > change. > > To better reflect the purpose of the method rename it to change_mode() > > Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics > --- > drivers/platform/x86/acerhdf.c | 6 +++--- > drivers/thermal/imx_thermal.c | 8 ++++---- > drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 6 +++--- > drivers/thermal/intel/intel_quark_dts_thermal.c | 6 +++--- > drivers/thermal/thermal_core.c | 4 ++-- > include/linux/thermal.h | 2 +- > 6 files changed, 16 insertions(+), 16 deletions(-) > > diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c > index d33a70af0869..63b562e06d5c 100644 > --- a/drivers/platform/x86/acerhdf.c > +++ b/drivers/platform/x86/acerhdf.c > @@ -413,8 +413,8 @@ static inline void acerhdf_enable_kernelmode(void) > * the temperature and the fan. > * disabled: the BIOS takes control of the fan. > */ > -static int acerhdf_set_mode(struct thermal_zone_device *thermal, > - enum thermal_device_mode mode) > +static int acerhdf_change_mode(struct thermal_zone_device *thermal, > + enum thermal_device_mode mode) > { > if (mode == THERMAL_DEVICE_DISABLED && kernelmode) > acerhdf_revert_to_bios_mode(); > @@ -473,7 +473,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = { > .bind = acerhdf_bind, > .unbind = acerhdf_unbind, > .get_temp = acerhdf_get_ec_temp, > - .set_mode = acerhdf_set_mode, > + .change_mode = acerhdf_change_mode, > .get_trip_type = acerhdf_get_trip_type, > .get_trip_hyst = acerhdf_get_trip_hyst, > .get_trip_temp = acerhdf_get_trip_temp, > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index a02398118d88..9700ae39feb7 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -330,8 +330,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) > return 0; > } > > -static int imx_set_mode(struct thermal_zone_device *tz, > - enum thermal_device_mode mode) > +static int imx_change_mode(struct thermal_zone_device *tz, > + enum thermal_device_mode mode) > { > struct imx_thermal_data *data = tz->devdata; > struct regmap *map = data->tempmon; > @@ -447,7 +447,7 @@ static struct thermal_zone_device_ops imx_tz_ops = { > .bind = imx_bind, > .unbind = imx_unbind, > .get_temp = imx_get_temp, > - .set_mode = imx_set_mode, > + .change_mode = imx_change_mode, > .get_trip_type = imx_get_trip_type, > .get_trip_temp = imx_get_trip_temp, > .get_crit_temp = imx_get_crit_temp, > @@ -860,7 +860,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev) > * Need to disable thermal sensor, otherwise, when thermal core > * try to get temperature before thermal sensor resume, a wrong > * temperature will be read as the thermal sensor is powered > - * down. This is done in set_mode() operation called from > + * down. This is done in change_mode() operation called from > * thermal_zone_device_disable() > */ > ret = thermal_zone_device_disable(data->tz); > diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c > index 9af862ab9f65..58870d215471 100644 > --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c > +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c > @@ -377,8 +377,8 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, > return 0; > } > > -static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, > - enum thermal_device_mode mode) > +static int int3400_thermal_change_mode(struct thermal_zone_device *thermal, > + enum thermal_device_mode mode) > { > struct int3400_thermal_priv *priv = thermal->devdata; > int result = 0; > @@ -399,7 +399,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, > > static struct thermal_zone_device_ops int3400_thermal_ops = { > .get_temp = int3400_thermal_get_temp, > - .set_mode = int3400_thermal_set_mode, > + .change_mode = int3400_thermal_change_mode, > }; > > static struct thermal_zone_params int3400_thermal_params = { > diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c > index e29c3e330b17..3eafc6b0e6c3 100644 > --- a/drivers/thermal/intel/intel_quark_dts_thermal.c > +++ b/drivers/thermal/intel/intel_quark_dts_thermal.c > @@ -298,8 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd, > return 0; > } > > -static int sys_set_mode(struct thermal_zone_device *tzd, > - enum thermal_device_mode mode) > +static int sys_change_mode(struct thermal_zone_device *tzd, > + enum thermal_device_mode mode) > { > int ret; > > @@ -319,7 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = { > .get_trip_type = sys_get_trip_type, > .set_trip_temp = sys_set_trip_temp, > .get_crit_temp = sys_get_crit_temp, > - .set_mode = sys_set_mode, > + .change_mode = sys_change_mode, > }; > > static void free_soc_dts(struct soc_sensor_entry *aux_entry) > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index e9c0b990e4a9..c00edae7839e 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -482,8 +482,8 @@ int thermal_zone_device_set_mode(struct thermal_zone_device *tz, > return ret; > } > > - if (tz->ops->set_mode) > - ret = tz->ops->set_mode(tz, mode); > + if (tz->ops->change_mode) > + ret = tz->ops->change_mode(tz, mode); > > if (!ret) > tz->mode = mode; > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index df013c39ba9b..b9efaa780d88 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -76,7 +76,7 @@ struct thermal_zone_device_ops { > struct thermal_cooling_device *); > int (*get_temp) (struct thermal_zone_device *, int *); > int (*set_trips) (struct thermal_zone_device *, int, int); > - int (*set_mode) (struct thermal_zone_device *, > + int (*change_mode) (struct thermal_zone_device *, > enum thermal_device_mode); > int (*get_trip_type) (struct thermal_zone_device *, int, > enum thermal_trip_type *); >
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index d33a70af0869..63b562e06d5c 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -413,8 +413,8 @@ static inline void acerhdf_enable_kernelmode(void) * the temperature and the fan. * disabled: the BIOS takes control of the fan. */ -static int acerhdf_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) +static int acerhdf_change_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) { if (mode == THERMAL_DEVICE_DISABLED && kernelmode) acerhdf_revert_to_bios_mode(); @@ -473,7 +473,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = { .bind = acerhdf_bind, .unbind = acerhdf_unbind, .get_temp = acerhdf_get_ec_temp, - .set_mode = acerhdf_set_mode, + .change_mode = acerhdf_change_mode, .get_trip_type = acerhdf_get_trip_type, .get_trip_hyst = acerhdf_get_trip_hyst, .get_trip_temp = acerhdf_get_trip_temp, diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index a02398118d88..9700ae39feb7 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -330,8 +330,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp) return 0; } -static int imx_set_mode(struct thermal_zone_device *tz, - enum thermal_device_mode mode) +static int imx_change_mode(struct thermal_zone_device *tz, + enum thermal_device_mode mode) { struct imx_thermal_data *data = tz->devdata; struct regmap *map = data->tempmon; @@ -447,7 +447,7 @@ static struct thermal_zone_device_ops imx_tz_ops = { .bind = imx_bind, .unbind = imx_unbind, .get_temp = imx_get_temp, - .set_mode = imx_set_mode, + .change_mode = imx_change_mode, .get_trip_type = imx_get_trip_type, .get_trip_temp = imx_get_trip_temp, .get_crit_temp = imx_get_crit_temp, @@ -860,7 +860,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev) * Need to disable thermal sensor, otherwise, when thermal core * try to get temperature before thermal sensor resume, a wrong * temperature will be read as the thermal sensor is powered - * down. This is done in set_mode() operation called from + * down. This is done in change_mode() operation called from * thermal_zone_device_disable() */ ret = thermal_zone_device_disable(data->tz); diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c index 9af862ab9f65..58870d215471 100644 --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c @@ -377,8 +377,8 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, return 0; } -static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, - enum thermal_device_mode mode) +static int int3400_thermal_change_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) { struct int3400_thermal_priv *priv = thermal->devdata; int result = 0; @@ -399,7 +399,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, static struct thermal_zone_device_ops int3400_thermal_ops = { .get_temp = int3400_thermal_get_temp, - .set_mode = int3400_thermal_set_mode, + .change_mode = int3400_thermal_change_mode, }; static struct thermal_zone_params int3400_thermal_params = { diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c index e29c3e330b17..3eafc6b0e6c3 100644 --- a/drivers/thermal/intel/intel_quark_dts_thermal.c +++ b/drivers/thermal/intel/intel_quark_dts_thermal.c @@ -298,8 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd, return 0; } -static int sys_set_mode(struct thermal_zone_device *tzd, - enum thermal_device_mode mode) +static int sys_change_mode(struct thermal_zone_device *tzd, + enum thermal_device_mode mode) { int ret; @@ -319,7 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = { .get_trip_type = sys_get_trip_type, .set_trip_temp = sys_set_trip_temp, .get_crit_temp = sys_get_crit_temp, - .set_mode = sys_set_mode, + .change_mode = sys_change_mode, }; static void free_soc_dts(struct soc_sensor_entry *aux_entry) diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index e9c0b990e4a9..c00edae7839e 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -482,8 +482,8 @@ int thermal_zone_device_set_mode(struct thermal_zone_device *tz, return ret; } - if (tz->ops->set_mode) - ret = tz->ops->set_mode(tz, mode); + if (tz->ops->change_mode) + ret = tz->ops->change_mode(tz, mode); if (!ret) tz->mode = mode; diff --git a/include/linux/thermal.h b/include/linux/thermal.h index df013c39ba9b..b9efaa780d88 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -76,7 +76,7 @@ struct thermal_zone_device_ops { struct thermal_cooling_device *); int (*get_temp) (struct thermal_zone_device *, int *); int (*set_trips) (struct thermal_zone_device *, int, int); - int (*set_mode) (struct thermal_zone_device *, + int (*change_mode) (struct thermal_zone_device *, enum thermal_device_mode); int (*get_trip_type) (struct thermal_zone_device *, int, enum thermal_trip_type *);
set_mode() is only called when tzd's mode is about to change. Actual setting is performed in thermal_core, in thermal_zone_device_set_mode(). The meaning of set_mode() callback is actually to notify the driver about the mode being changed and giving the driver a chance to oppose such change. To better reflect the purpose of the method rename it to change_mode() Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> --- drivers/platform/x86/acerhdf.c | 6 +++--- drivers/thermal/imx_thermal.c | 8 ++++---- drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 6 +++--- drivers/thermal/intel/intel_quark_dts_thermal.c | 6 +++--- drivers/thermal/thermal_core.c | 4 ++-- include/linux/thermal.h | 2 +- 6 files changed, 16 insertions(+), 16 deletions(-)