From patchwork Wed Jul 8 07:19:28 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frank Lee X-Patchwork-Id: 11650875 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0164013BD for ; Wed, 8 Jul 2020 07:20:22 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C49D320786 for ; Wed, 8 Jul 2020 07:20:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730288AbgGHHUV (ORCPT ); Wed, 8 Jul 2020 03:20:21 -0400 Received: from smtp2207-205.mail.aliyun.com ([121.197.207.205]:36562 "EHLO smtp2207-205.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730239AbgGHHUT (ORCPT ); Wed, 8 Jul 2020 03:20:19 -0400 X-Alimail-AntiSpam: AC=CONTINUE;BC=0.07436282|-1;CH=green;DM=|CONTINUE|false|;DS=CONTINUE|ham_system_inform|0.0319566-0.00580366-0.96224;FP=0|0|0|0|0|-1|-1|-1;HT=e02c03299;MF=frank@allwinnertech.com;NM=1;PH=DS;RN=33;RT=33;SR=0;TI=SMTPD_---.I-8lwqE_1594192774; Received: from allwinnertech.com(mailfrom:frank@allwinnertech.com fp:SMTPD_---.I-8lwqE_1594192774) by smtp.aliyun-inc.com(10.147.40.26); Wed, 08 Jul 2020 15:19:48 +0800 From: Frank Lee To: robh+dt@kernel.org, mripard@kernel.org, wens@csie.org, mturquette@baylibre.com, sboyd@kernel.org, gregory.clement@bootlin.com, tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, srinivas.kandagatla@linaro.org, linus.walleij@linaro.org, anarsoul@gmail.com, tiny.windzz@gmail.com, rui.zhang@intel.com, daniel.lezcano@linaro.org, amit.kucheria@verdurent.com, lee.jones@linaro.org, p.zabel@pengutronix.de, clabbe@baylibre.com, icenowy@aosc.io, megous@megous.com, stefan@olimex.com, bage@linutronix.de Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-i2c@vger.kernel.org, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, huangshuosheng@allwinnertech.com, liyong@allwinnertech.com, Frank Lee Subject: [PATCH v3 02/16] clk: sunxi-ng: add support for the Allwinner A100 CCU Date: Wed, 8 Jul 2020 15:19:28 +0800 Message-Id: <20200708071942.22595-3-frank@allwinnertech.com> X-Mailer: git-send-email 2.24.0 In-Reply-To: <20200708071942.22595-1-frank@allwinnertech.com> References: <20200708071942.22595-1-frank@allwinnertech.com> MIME-Version: 1.0 Sender: linux-pm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add support for a100 in the sunxi-ng CCU framework. Signed-off-by: Frank Lee --- drivers/clk/sunxi-ng/Kconfig | 10 + drivers/clk/sunxi-ng/Makefile | 2 + drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c | 214 +++++ drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h | 21 + drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 1276 +++++++++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun50i-a100.h | 56 ++ include/dt-bindings/clock/sun50i-a100-ccu.h | 116 +++ include/dt-bindings/clock/sun50i-a100-r-ccu.h | 23 + include/dt-bindings/reset/sun50i-a100-ccu.h | 68 ++ include/dt-bindings/reset/sun50i-a100-r-ccu.h | 18 + 10 files changed, 1804 insertions(+) create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index cdf3330..ce5f584 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -17,6 +17,16 @@ config SUN50I_A64_CCU default ARM64 && ARCH_SUNXI depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST +config SUN50I_A100_CCU + bool "Support for the Allwinner A100 CCU" + default ARM64 && ARCH_SUNXI + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST + +config SUN50I_A100_R_CCU + bool "Support for the Allwinner A100 PRCM CCU" + default ARM64 && ARCH_SUNXI + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST + config SUN50I_H6_CCU bool "Support for the Allwinner H6 CCU" default ARM64 && ARCH_SUNXI diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 4c7bee8..3eb5cff 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -23,6 +23,8 @@ obj-y += ccu_mp.o # SoC support obj-$(CONFIG_SUNIV_F1C100S_CCU) += ccu-suniv-f1c100s.o obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o +obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o +obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c new file mode 100644 index 0000000..d6dbd355 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Frank Lee + */ + +#include +#include +#include +#include + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_nm.h" + +#include "ccu-sun50i-a100-r.h" + +static const char * const cpus_r_apb2_parents[] = { "dcxo24M", "osc32k", + "iosc", "pll-periph0" }; +static const struct ccu_mux_var_prediv cpus_r_apb2_predivs[] = { + { .index = 3, .shift = 0, .width = 5 }, +}; + +static struct ccu_div r_cpus_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 24, + .width = 2, + + .var_predivs = cpus_r_apb2_predivs, + .n_var_predivs = ARRAY_SIZE(cpus_r_apb2_predivs), + }, + + .common = { + .reg = 0x000, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("cpus", + cpus_r_apb2_parents, + &ccu_div_ops, + 0), + }, +}; + +static CLK_FIXED_FACTOR_HW(r_ahb_clk, "r-ahb", &r_cpus_clk.common.hw, 1, 1, 0); + +static struct ccu_div r_apb1_clk = { + .div = _SUNXI_CCU_DIV(0, 2), + + .common = { + .reg = 0x00c, + .hw.init = CLK_HW_INIT("r-apb1", + "r-ahb", + &ccu_div_ops, + 0), + }, +}; + +static struct ccu_div r_apb2_clk = { + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + + .mux = { + .shift = 24, + .width = 2, + + .var_predivs = cpus_r_apb2_predivs, + .n_var_predivs = ARRAY_SIZE(cpus_r_apb2_predivs), + }, + + .common = { + .reg = 0x010, + .features = CCU_FEATURE_VARIABLE_PREDIV, + .hw.init = CLK_HW_INIT_PARENTS("r-apb2", + cpus_r_apb2_parents, + &ccu_div_ops, + 0), + }, +}; + +static const struct clk_parent_data clk_parent_r_apb1[] = { + { .hw = &r_apb1_clk.common.hw }, +}; + +static const struct clk_parent_data clk_parent_r_apb2[] = { + { .hw = &r_apb2_clk.common.hw }, +}; + +static SUNXI_CCU_GATE_DATA(r_apb1_timer_clk, "r-apb1-timer", clk_parent_r_apb1, + 0x11c, BIT(0), 0); + +static SUNXI_CCU_GATE_DATA(r_apb1_twd_clk, "r-apb1-twd", clk_parent_r_apb1, + 0x12c, BIT(0), 0); + +static const char * const r_apb1_pwm_clk_parents[] = { "dcxo24M", "osc32k", + "iosc" }; +static SUNXI_CCU_MUX(r_apb1_pwm_clk, "r-apb1-pwm", r_apb1_pwm_clk_parents, + 0x130, 24, 2, 0); + +static SUNXI_CCU_GATE_DATA(r_apb1_bus_pwm_clk, "r-apb1-bus-pwm", + clk_parent_r_apb1, 0x13c, BIT(0), 0); + +static SUNXI_CCU_GATE_DATA(r_apb1_ppu_clk, "r-apb1-ppu", clk_parent_r_apb1, + 0x17c, BIT(0), 0); + +static SUNXI_CCU_GATE_DATA(r_apb2_uart_clk, "r-apb2-uart", clk_parent_r_apb2, + 0x18c, BIT(0), 0); + +static SUNXI_CCU_GATE_DATA(r_apb2_i2c0_clk, "r-apb2-i2c0", clk_parent_r_apb2, + 0x19c, BIT(0), 0); + +static SUNXI_CCU_GATE_DATA(r_apb2_i2c1_clk, "r-apb2-i2c1", clk_parent_r_apb2, + 0x19c, BIT(1), 0); + +static const char * const r_apb1_ir_rx_parents[] = { "osc32k", "dcxo24M" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(r_apb1_ir_rx_clk, "r-apb1-ir-rx", + r_apb1_ir_rx_parents, 0x1c0, + 0, 5, /* M */ + 8, 2, /* P */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE_DATA(r_apb1_bus_ir_rx_clk, "r-apb1-bus-ir-rx", + clk_parent_r_apb1, 0x1cc, BIT(0), 0); + +static SUNXI_CCU_GATE(r_ahb_bus_rtc_clk, "r-ahb-rtc", "r-ahb", + 0x20c, BIT(0), 0); + +static struct ccu_common *sun50i_a100_r_ccu_clks[] = { + &r_cpus_clk.common, + &r_apb1_clk.common, + &r_apb2_clk.common, + &r_apb1_timer_clk.common, + &r_apb1_twd_clk.common, + &r_apb1_pwm_clk.common, + &r_apb1_bus_pwm_clk.common, + &r_apb1_ppu_clk.common, + &r_apb2_uart_clk.common, + &r_apb2_i2c0_clk.common, + &r_apb2_i2c1_clk.common, + &r_apb1_ir_rx_clk.common, + &r_apb1_bus_ir_rx_clk.common, + &r_ahb_bus_rtc_clk.common, +}; + +static struct clk_hw_onecell_data sun50i_a100_r_hw_clks = { + .hws = { + [CLK_R_CPUS] = &r_cpus_clk.common.hw, + [CLK_R_AHB] = &r_ahb_clk.hw, + [CLK_R_APB1] = &r_apb1_clk.common.hw, + [CLK_R_APB2] = &r_apb2_clk.common.hw, + [CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw, + [CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw, + [CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw, + [CLK_R_APB1_BUS_PWM] = &r_apb1_bus_pwm_clk.common.hw, + [CLK_R_APB1_PPU] = &r_apb1_ppu_clk.common.hw, + [CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw, + [CLK_R_APB2_I2C0] = &r_apb2_i2c0_clk.common.hw, + [CLK_R_APB2_I2C1] = &r_apb2_i2c1_clk.common.hw, + [CLK_R_APB1_IR] = &r_apb1_ir_rx_clk.common.hw, + [CLK_R_APB1_BUS_IR] = &r_apb1_bus_ir_rx_clk.common.hw, + [CLK_R_AHB_BUS_RTC] = &r_ahb_bus_rtc_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun50i_a100_r_ccu_resets[] = { + [RST_R_APB1_TIMER] = { 0x11c, BIT(16) }, + [RST_R_APB1_BUS_PWM] = { 0x13c, BIT(16) }, + [RST_R_APB1_PPU] = { 0x17c, BIT(16) }, + [RST_R_APB2_UART] = { 0x18c, BIT(16) }, + [RST_R_APB2_I2C0] = { 0x19c, BIT(16) }, + [RST_R_APB2_I2C1] = { 0x19c, BIT(17) }, + [RST_R_APB1_BUS_IR] = { 0x1cc, BIT(16) }, + [RST_R_AHB_BUS_RTC] = { 0x20c, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun50i_a100_r_ccu_desc = { + .ccu_clks = sun50i_a100_r_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_a100_r_ccu_clks), + + .hw_clks = &sun50i_a100_r_hw_clks, + + .resets = sun50i_a100_r_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_a100_r_ccu_resets), +}; + +static int sun50i_a100_r_ccu_probe(struct platform_device *pdev) +{ + void __iomem *reg; + + reg = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_r_ccu_desc); +} + +static const struct of_device_id sun50i_a100_r_ccu_ids[] = { + { .compatible = "allwinner,sun50i-a100-r-ccu" }, + { } +}; + +static struct platform_driver sun50i_a100_r_ccu_driver = { + .probe = sun50i_a100_r_ccu_probe, + .driver = { + .name = "sun50i-a100-r-ccu", + .of_match_table = sun50i_a100_r_ccu_ids, + }, +}; +module_platform_driver(sun50i_a100_r_ccu_driver); diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h new file mode 100644 index 0000000..8331fbc --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Frank Lee + */ + +#ifndef _CCU_SUN50I_A100_R_H +#define _CCU_SUN50I_A100_R_H + +#include +#include + +#define CLK_R_CPUS 0 +#define CLK_R_AHB 1 + +/* exported except APB1 for R_PIO */ + +#define CLK_R_APB2 3 + +#define CLK_NUMBER (CLK_R_AHB_BUS_RTC + 1) + +#endif /* _CCU_SUN50I_A100_R_H */ diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c new file mode 100644 index 0000000..98f32f8 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c @@ -0,0 +1,1276 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020 Frank Lee + */ + +#include +#include +#include +#include +#include + +#include "ccu_common.h" +#include "ccu_reset.h" + +#include "ccu_div.h" +#include "ccu_gate.h" +#include "ccu_mp.h" +#include "ccu_mult.h" +#include "ccu_nk.h" +#include "ccu_nkm.h" +#include "ccu_nkmp.h" +#include "ccu_nm.h" + +#include "ccu-sun50i-a100.h" + +#define SUN50I_A100_PLL_SDM_ENABLE BIT(24) +#define SUN50I_A100_PLL_OUTPUT_ENABLE BIT(27) +#define SUN50I_A100_PLL_LOCK BIT(28) +#define SUN50I_A100_PLL_LOCK_ENABLE BIT(29) +#define SUN50I_A100_PLL_ENABLE BIT(31) + +#define SUN50I_A100_PLL_PERIPH1_PATTERN0 0xd1303333 + +/* + * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However + * P should only be used for output frequencies lower than 288 MHz. + * + * For now we can just model it as a multiplier clock, and force P to /1. + * + * The M factor is present in the register's description, but not in the + * frequency formula, and it's documented as "M is only used for backdoor + * testing", so it's not modelled and then force to 0. + */ +#define SUN50I_A100_PLL_CPUX_REG 0x000 +static struct ccu_mult pll_cpux_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .common = { + .reg = 0x000, + .hw.init = CLK_HW_INIT("pll-cpux", "dcxo24M", + &ccu_mult_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */ +#define SUN50I_A100_PLL_DDR0_REG 0x010 +static struct ccu_nkmp pll_ddr0_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x010, + .hw.init = CLK_HW_INIT("pll-ddr0", "dcxo24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE | + CLK_IS_CRITICAL), + }, +}; + +#define SUN50I_A100_PLL_PERIPH0_REG 0x020 +static struct ccu_nkmp pll_periph0_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .fixed_post_div = 2, + .common = { + .reg = 0x020, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-periph0", "dcxo24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_A100_PLL_PERIPH1_REG 0x028 +static struct ccu_nkmp pll_periph1_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .fixed_post_div = 2, + .common = { + .reg = 0x028, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-periph1", "dcxo24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; +#define SUN50I_A100_PLL_PERIPH1_PATTERN0_REG 0x128 + +#define SUN50I_A100_PLL_GPU_REG 0x030 +static struct ccu_nkmp pll_gpu_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x030, + .hw.init = CLK_HW_INIT("pll-gpu", "dcxo24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * For Video PLLs, the output divider is described as "used for testing" + * in the user manual. So it's not modelled and forced to 0. + */ +#define SUN50I_A100_PLL_VIDEO0_REG 0x040 +static struct ccu_nm pll_video0_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .common = { + .reg = 0x040, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video0", "dcxo24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_A100_PLL_VIDEO1_REG 0x048 +static struct ccu_nm pll_video1_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .common = { + .reg = 0x048, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video1", "dcxo24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_A100_PLL_VIDEO2_REG 0x050 +static struct ccu_nm pll_video2_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .common = { + .reg = 0x050, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video2", "dcxo24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_A100_PLL_VE_REG 0x058 +static struct ccu_nkmp pll_ve_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */ + .common = { + .reg = 0x058, + .hw.init = CLK_HW_INIT("pll-ve", "dcxo24M", + &ccu_nkmp_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * The COM PLL has m0 dividers in addition to the usual N, M + * factors. Since we only need 1 frequencies from this PLL: 45.1584 MHz, + * ignore it for now. + */ +#define SUN50I_A100_PLL_COM_REG 0x060 +static struct ccu_sdm_setting pll_com_sdm_table[] = { + { .rate = 451584000, .pattern = 0xc0014396, .m = 2, .n = 37 }, +}; + +static struct ccu_nm pll_com_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(0, 1), + .sdm = _SUNXI_CCU_SDM(pll_com_sdm_table, BIT(24), + 0x160, BIT(31)), + .common = { + .reg = 0x060, + .features = CCU_FEATURE_SIGMA_DELTA_MOD, + .hw.init = CLK_HW_INIT("pll-com", "dcxo24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +#define SUN50I_A100_PLL_VIDEO3_REG 0x068 +static struct ccu_nm pll_video3_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */ + .fixed_post_div = 4, + .common = { + .reg = 0x068, + .features = CCU_FEATURE_FIXED_POSTDIV, + .hw.init = CLK_HW_INIT("pll-video3", "dcxo24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +/* + * The Audio PLL has m0, m1 dividers in addition to the usual N, M + * factors. Since we only need 4 frequencies from this PLL: 22.5792 MHz, + * 24.576 MHz, 90.3168MHz and 98.304MHz ignore them for now. + * Enforce the default for them, which is m0 = 1, m1 = 0. + */ +#define SUN50I_A100_PLL_AUDIO_REG 0x078 +static struct ccu_sdm_setting pll_audio_sdm_table[] = { + { .rate = 45158400, .pattern = 0xc001bcd3, .m = 18, .n = 33 }, + { .rate = 49152000, .pattern = 0xc001eb85, .m = 20, .n = 40 }, + { .rate = 180633600, .pattern = 0xc001288d, .m = 3, .n = 22 }, + { .rate = 196608000, .pattern = 0xc001eb85, .m = 5, .n = 40 }, +}; + +static struct ccu_nm pll_audio_clk = { + .enable = SUN50I_A100_PLL_OUTPUT_ENABLE, + .lock = SUN50I_A100_PLL_LOCK, + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12), + .m = _SUNXI_CCU_DIV(16, 6), + .fixed_post_div = 2, + .sdm = _SUNXI_CCU_SDM(pll_audio_sdm_table, BIT(24), + 0x178, BIT(31)), + .common = { + .reg = 0x078, + .features = CCU_FEATURE_FIXED_POSTDIV | + CCU_FEATURE_SIGMA_DELTA_MOD, + .hw.init = CLK_HW_INIT("pll-audio", "dcxo24M", + &ccu_nm_ops, + CLK_SET_RATE_UNGATE), + }, +}; + +static const char * const cpux_parents[] = { "dcxo24M", "osc32k", + "iosc", "pll-cpux", + "pll-periph0" }; +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents, + 0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL); +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0); +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0); + +static const char * const psi_ahb1_ahb2_parents[] = { "dcxo24M", "osc32k", + "iosc", "pll-periph0", + "pll-periph0-2x" }; +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2", + psi_ahb1_ahb2_parents, 0x510, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + 0); + +static const char * const ahb3_apb1_apb2_parents[] = { "dcxo24M", "osc32k", + "psi-ahb1-ahb2", + "pll-periph0", + "pll-periph0-2x" }; +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + 0); + +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + 0); + +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524, + 0, 2, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + 0); + +static const char * const mbus_parents[] = { "dcxo24M", "pll-ddr0", + "pll-periph0", + "pll-periph0-2x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540, + 0, 3, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + CLK_IS_CRITICAL); + +static const char * const de_parents[] = { "pll-com", "pll-periph0-2x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de0", de_parents, 0x600, + 0, 4, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2", + 0x60c, BIT(0), 0); + +static const char * const g2d_parents[] = { "pll-com", "pll-periph0-2x", + "pll-video0-2x", "pll-video1-2x", + "pll-video2-2x"}; +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", + g2d_parents, + 0x630, + 0, 4, /* M */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2", + 0x63c, BIT(0), 0); + +static const char * const gpu_parents[] = { "pll-gpu" }; +static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670, + 0, 2, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2", + 0x67c, BIT(0), 0); + +static const char * const ce_parents[] = { "dcxo24M", "pll-periph0-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 1, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2", + 0x68c, BIT(0), 0); + +static const char * const ve_parents[] = { "pll-ve" }; +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690, + 0, 3, /* M */ + 24, 1, /* mux */ + BIT(31), /* gate */ + CLK_SET_RATE_PARENT); + +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2", + 0x69c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2", + 0x70c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2", + 0x71c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2", + 0x72c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2", + 0x73c, BIT(0), 0); + +static SUNXI_CCU_GATE(avs_clk, "avs", "dcxo24M", 0x740, BIT(31), 0); + +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2", + 0x78c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2", + 0x79c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0); + +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus", + 0x804, BIT(0), 0); +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus", + 0x804, BIT(1), 0); +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus", + 0x804, BIT(2), 0); +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus", + 0x804, BIT(5), 0); +static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus", + 0x804, BIT(8), 0); +static SUNXI_CCU_GATE(mbus_isp_clk, "mbus-isp", "mbus", + 0x804, BIT(9), 0); +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus", + 0x804, BIT(10), 0); + +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2", + 0x80c, BIT(0), CLK_IS_CRITICAL); + +static const char * const nand_spi_parents[] = { "dcxo24M", + "pll-periph0", + "pll-periph1", + "pll-periph0-2x", + "pll-periph1-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0); + +static const char * const mmc_parents[] = { "dcxo24M", "pll-periph0-2x", + "pll-periph1-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + CLK_SET_RATE_NO_REPARENT); + +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + CLK_SET_RATE_NO_REPARENT); + +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 2, /* post-div */ + CLK_SET_RATE_NO_REPARENT); + +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0); + +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0); +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0); + +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0); +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", nand_spi_parents, 0x948, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb3", 0x96c, BIT(2), 0); + +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970, + BIT(31) | BIT(30), 0); + +static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0); + +static const char * const ir_parents[] = { "osc32k", "iosc", + "pll-periph0", "pll-periph1" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_rx_clk, "ir-rx", ir_parents, 0x990, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ir_rx_clk, "bus-ir-rx", "ahb3", 0x99c, BIT(0), 0); + +static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_parents, 0x9c0, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb1", 0x9ec, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0); + +static const char * const audio_parents[] = { "pll-audio", "pll-com-audio" }; +static struct ccu_div i2s0_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa10, + .hw.init = CLK_HW_INIT_PARENTS("i2s0", + audio_parents, + &ccu_div_ops, + CLK_SET_RATE_PARENT), + }, +}; + +static struct ccu_div i2s1_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa14, + .hw.init = CLK_HW_INIT_PARENTS("i2s1", + audio_parents, + &ccu_div_ops, + CLK_SET_RATE_PARENT), + }, +}; + +static struct ccu_div i2s2_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa18, + .hw.init = CLK_HW_INIT_PARENTS("i2s2", + audio_parents, + &ccu_div_ops, + CLK_SET_RATE_PARENT), + }, +}; + +static struct ccu_div i2s3_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa1c, + .hw.init = CLK_HW_INIT_PARENTS("i2s3", + audio_parents, + &ccu_div_ops, + CLK_SET_RATE_PARENT), + }, +}; + +static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa20, BIT(0), 0); +static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa20, BIT(1), 0); +static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa20, BIT(2), 0); +static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa20, BIT(3), 0); + +static struct ccu_div spdif_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa24, + .hw.init = CLK_HW_INIT_PARENTS("spdif", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0); + +static struct ccu_div dmic_clk = { + .enable = BIT(31), + .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO), + .mux = _SUNXI_CCU_MUX(24, 2), + .common = { + .reg = 0xa40, + .hw.init = CLK_HW_INIT_PARENTS("dmic", + audio_parents, + &ccu_div_ops, + 0), + }, +}; + +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_dac_clk, "audio-codec-dac", + audio_parents, 0xa50, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_adc_clk, "audio-codec-adc", + audio_parents, 0xa54, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x", + audio_parents, 0xa58, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c, + BIT(0), 0); + +/* + * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports. + * We will force them to 0 (12M divided from 48M). + */ +#define SUN50I_A100_USB0_CLK_REG 0xa70 +#define SUN50I_A100_USB1_CLK_REG 0xa74 + +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "dcxo24M", 0xa70, BIT(29), 0); + +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0); +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "dcxo24M", 0xa74, BIT(29), 0); + +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0); +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0); +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0); +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0); +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0); + +static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "ahb3", 0xa9c, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_dpss_top0_clk, "bus-dpss-top0", "ahb3", + 0xabc, BIT(0), 0); + +static SUNXI_CCU_GATE(bus_dpss_top1_clk, "bus-dpss-top1", "ahb3", + 0xacc, BIT(0), 0); + +static const char * const mipi_dsi_parents[] = { "dcxo24M", "pll-periph0-2x", + "pll-periph0" }; +static SUNXI_CCU_M_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", + mipi_dsi_parents, + 0xb24, + 0, 4, /* M */ + 24, 2, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb3", + 0xb4c, BIT(0), 0); + +static const char * const tcon_lcd_parents[] = { "pll-video0-4x", + "pll-video1-4x", + "pll-video2-4x", + "pll-video3-4x", + "pll-periph0-2x" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd0", + tcon_lcd_parents, 0xb60, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_tcon_lcd_clk, "bus-tcon-lcd0", "ahb3", + 0xb7c, BIT(0), 0); + +static const char * const ledc_parents[] = { "dcxo24M", + "pll-periph0" }; +static SUNXI_CCU_MP_WITH_MUX_GATE(ledc_clk, "ledc", + ledc_parents, 0xbf0, + 0, 4, /* M */ + 8, 2, /* P */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_ledc_clk, "bus-ledc", "ahb3", 0xbfc, BIT(0), 0); + +static const char * const csi_top_parents[] = { "pll-periph0-2x", + "pll-video0-2x", + "pll-video1-2x", + "pll-video2-2x", + "pll-video3-2x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi_top_clk, "csi-top", + csi_top_parents, 0xc04, + 0, 4, /* M */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static const char * const csi0_mclk_parents[] = { "dcxo24M", "pll-video2", + "pll-video3", "pll-video0", + "pll-video1" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi0_mclk_clk, "csi0-mclk", + csi0_mclk_parents, 0xc08, + 0, 5, /* M */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static const char * const csi1_mclk_parents[] = { "dcxo24M", "pll-video3", + "pll-video0", "pll-video1", + "pll-video2" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi1_mclk_clk, "csi1-mclk", + csi1_mclk_parents, 0xc0c, + 0, 5, /* M */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc1c, BIT(0), 0); + +static const char * const csi_isp_parents[] = { "pll-periph0-2x", + "pll-video0-2x", + "pll-video1-2x", + "pll-video2-2x", + "pll-video3-2x" }; +static SUNXI_CCU_M_WITH_MUX_GATE(csi_isp_clk, "csi-isp", + csi_isp_parents, 0xc20, + 0, 5, /* M */ + 24, 3, /* mux */ + BIT(31), /* gate */ + 0); + +/* Fixed factor clocks */ +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0); + +static CLK_FIXED_FACTOR_HW(pll_com_audio_clk, "pll-com-audio", + &pll_com_clk.common.hw, + 5, 1, CLK_SET_RATE_PARENT); + +static CLK_FIXED_FACTOR_HW(pll_periph0_2x_clk, "pll-periph0-2x", + &pll_periph0_clk.common.hw, + 1, 2, 0); + +static CLK_FIXED_FACTOR_HW(pll_periph1_2x_clk, "pll-periph1-2x", + &pll_periph1_clk.common.hw, + 1, 2, 0); + +static const struct clk_hw *pll_video0_parents[] = { + &pll_video0_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_video0_4x_clk, "pll-video0-4x", + pll_video0_parents, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_video0_2x_clk, "pll-video0-2x", + pll_video0_parents, + 1, 2, CLK_SET_RATE_PARENT); + +static const struct clk_hw *pll_video1_parents[] = { + &pll_video1_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_video1_4x_clk, "pll-video1-4x", + pll_video1_parents, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_video1_2x_clk, "pll-video1-2x", + pll_video1_parents, + 1, 2, CLK_SET_RATE_PARENT); + +static const struct clk_hw *pll_video2_parents[] = { + &pll_video2_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_video2_4x_clk, "pll-video2-4x", + pll_video2_parents, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_video2_2x_clk, "pll-video2-2x", + pll_video2_parents, + 1, 2, CLK_SET_RATE_PARENT); + +static const struct clk_hw *pll_video3_parents[] = { + &pll_video3_clk.common.hw +}; +static CLK_FIXED_FACTOR_HWS(pll_video3_4x_clk, "pll-video3-4x", + pll_video3_parents, + 1, 4, CLK_SET_RATE_PARENT); +static CLK_FIXED_FACTOR_HWS(pll_video3_2x_clk, "pll-video3-2x", + pll_video3_parents, + 1, 2, CLK_SET_RATE_PARENT); + +static struct ccu_common *sun50i_a100_ccu_clks[] = { + &pll_cpux_clk.common, + &pll_ddr0_clk.common, + &pll_periph0_clk.common, + &pll_periph1_clk.common, + &pll_gpu_clk.common, + &pll_video0_clk.common, + &pll_video1_clk.common, + &pll_video2_clk.common, + &pll_video3_clk.common, + &pll_ve_clk.common, + &pll_com_clk.common, + &pll_audio_clk.common, + &cpux_clk.common, + &axi_clk.common, + &cpux_apb_clk.common, + &psi_ahb1_ahb2_clk.common, + &ahb3_clk.common, + &apb1_clk.common, + &apb2_clk.common, + &mbus_clk.common, + &de_clk.common, + &bus_de_clk.common, + &g2d_clk.common, + &bus_g2d_clk.common, + &gpu_clk.common, + &bus_gpu_clk.common, + &ce_clk.common, + &bus_ce_clk.common, + &ve_clk.common, + &bus_ve_clk.common, + &bus_dma_clk.common, + &bus_msgbox_clk.common, + &bus_spinlock_clk.common, + &bus_hstimer_clk.common, + &avs_clk.common, + &bus_dbg_clk.common, + &bus_psi_clk.common, + &bus_pwm_clk.common, + &bus_iommu_clk.common, + &mbus_dma_clk.common, + &mbus_ve_clk.common, + &mbus_ce_clk.common, + &mbus_nand_clk.common, + &mbus_csi_clk.common, + &mbus_isp_clk.common, + &mbus_g2d_clk.common, + &bus_dram_clk.common, + &nand0_clk.common, + &nand1_clk.common, + &bus_nand_clk.common, + &mmc0_clk.common, + &mmc1_clk.common, + &mmc2_clk.common, + &bus_mmc0_clk.common, + &bus_mmc1_clk.common, + &bus_mmc2_clk.common, + &bus_uart0_clk.common, + &bus_uart1_clk.common, + &bus_uart2_clk.common, + &bus_uart3_clk.common, + &bus_uart4_clk.common, + &bus_i2c0_clk.common, + &bus_i2c1_clk.common, + &bus_i2c2_clk.common, + &bus_i2c3_clk.common, + &spi0_clk.common, + &spi1_clk.common, + &spi2_clk.common, + &bus_spi0_clk.common, + &bus_spi1_clk.common, + &bus_spi2_clk.common, + &emac_25m_clk.common, + &bus_emac_clk.common, + &ir_rx_clk.common, + &bus_ir_rx_clk.common, + &ir_tx_clk.common, + &bus_ir_tx_clk.common, + &bus_gpadc_clk.common, + &bus_ths_clk.common, + &i2s0_clk.common, + &i2s1_clk.common, + &i2s2_clk.common, + &i2s3_clk.common, + &bus_i2s0_clk.common, + &bus_i2s1_clk.common, + &bus_i2s2_clk.common, + &bus_i2s3_clk.common, + &spdif_clk.common, + &bus_spdif_clk.common, + &dmic_clk.common, + &bus_dmic_clk.common, + &audio_codec_dac_clk.common, + &audio_codec_adc_clk.common, + &audio_codec_4x_clk.common, + &bus_audio_codec_clk.common, + &usb_ohci0_clk.common, + &usb_phy0_clk.common, + &usb_ohci1_clk.common, + &usb_phy1_clk.common, + &bus_ohci0_clk.common, + &bus_ohci1_clk.common, + &bus_ehci0_clk.common, + &bus_ehci1_clk.common, + &bus_otg_clk.common, + &bus_lradc_clk.common, + &bus_dpss_top0_clk.common, + &bus_dpss_top1_clk.common, + &mipi_dsi_clk.common, + &bus_mipi_dsi_clk.common, + &tcon_lcd_clk.common, + &bus_tcon_lcd_clk.common, + &ledc_clk.common, + &bus_ledc_clk.common, + &csi_top_clk.common, + &csi0_mclk_clk.common, + &csi1_mclk_clk.common, + &bus_csi_clk.common, + &csi_isp_clk.common, +}; + +static struct clk_hw_onecell_data sun50i_a100_hw_clks = { + .hws = { + [CLK_OSC12M] = &osc12M_clk.hw, + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw, + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw, + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw, + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw, + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw, + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw, + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw, + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw, + [CLK_PLL_VIDEO0_2X] = &pll_video0_2x_clk.hw, + [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw, + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw, + [CLK_PLL_VIDEO1_2X] = &pll_video1_2x_clk.hw, + [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw, + [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw, + [CLK_PLL_VIDEO2_2X] = &pll_video2_2x_clk.hw, + [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw, + [CLK_PLL_VIDEO3] = &pll_video3_clk.common.hw, + [CLK_PLL_VIDEO3_2X] = &pll_video3_2x_clk.hw, + [CLK_PLL_VIDEO3_4X] = &pll_video3_4x_clk.hw, + [CLK_PLL_VE] = &pll_ve_clk.common.hw, + [CLK_PLL_COM] = &pll_com_clk.common.hw, + [CLK_PLL_COM_AUDIO] = &pll_com_audio_clk.hw, + [CLK_PLL_AUDIO] = &pll_audio_clk.common.hw, + [CLK_CPUX] = &cpux_clk.common.hw, + [CLK_AXI] = &axi_clk.common.hw, + [CLK_CPUX_APB] = &cpux_apb_clk.common.hw, + [CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw, + [CLK_AHB3] = &ahb3_clk.common.hw, + [CLK_APB1] = &apb1_clk.common.hw, + [CLK_APB2] = &apb2_clk.common.hw, + [CLK_MBUS] = &mbus_clk.common.hw, + [CLK_DE] = &de_clk.common.hw, + [CLK_BUS_DE] = &bus_de_clk.common.hw, + [CLK_G2D] = &g2d_clk.common.hw, + [CLK_BUS_G2D] = &bus_g2d_clk.common.hw, + [CLK_GPU] = &gpu_clk.common.hw, + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw, + [CLK_CE] = &ce_clk.common.hw, + [CLK_BUS_CE] = &bus_ce_clk.common.hw, + [CLK_VE] = &ve_clk.common.hw, + [CLK_BUS_VE] = &bus_ve_clk.common.hw, + [CLK_BUS_DMA] = &bus_dma_clk.common.hw, + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw, + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw, + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, + [CLK_AVS] = &avs_clk.common.hw, + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, + [CLK_BUS_PSI] = &bus_psi_clk.common.hw, + [CLK_BUS_PWM] = &bus_pwm_clk.common.hw, + [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw, + [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw, + [CLK_MBUS_VE] = &mbus_ve_clk.common.hw, + [CLK_MBUS_CE] = &mbus_ce_clk.common.hw, + [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw, + [CLK_MBUS_CSI] = &mbus_csi_clk.common.hw, + [CLK_MBUS_ISP] = &mbus_isp_clk.common.hw, + [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw, + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, + [CLK_NAND0] = &nand0_clk.common.hw, + [CLK_NAND1] = &nand1_clk.common.hw, + [CLK_BUS_NAND] = &bus_nand_clk.common.hw, + [CLK_MMC0] = &mmc0_clk.common.hw, + [CLK_MMC1] = &mmc1_clk.common.hw, + [CLK_MMC2] = &mmc2_clk.common.hw, + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw, + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw, + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw, + [CLK_SPI0] = &spi0_clk.common.hw, + [CLK_SPI1] = &spi1_clk.common.hw, + [CLK_SPI2] = &spi2_clk.common.hw, + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw, + [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw, + [CLK_EMAC_25M] = &emac_25m_clk.common.hw, + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw, + [CLK_IR_RX] = &ir_rx_clk.common.hw, + [CLK_BUS_IR_RX] = &bus_ir_rx_clk.common.hw, + [CLK_IR_TX] = &ir_tx_clk.common.hw, + [CLK_BUS_IR_TX] = &bus_ir_tx_clk.common.hw, + [CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw, + [CLK_BUS_THS] = &bus_ths_clk.common.hw, + [CLK_I2S0] = &i2s0_clk.common.hw, + [CLK_I2S1] = &i2s1_clk.common.hw, + [CLK_I2S2] = &i2s2_clk.common.hw, + [CLK_I2S3] = &i2s3_clk.common.hw, + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw, + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw, + [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw, + [CLK_BUS_I2S3] = &bus_i2s3_clk.common.hw, + [CLK_SPDIF] = &spdif_clk.common.hw, + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw, + [CLK_DMIC] = &dmic_clk.common.hw, + [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw, + [CLK_AUDIO_DAC] = &audio_codec_dac_clk.common.hw, + [CLK_AUDIO_ADC] = &audio_codec_adc_clk.common.hw, + [CLK_AUDIO_4X] = &audio_codec_4x_clk.common.hw, + [CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw, + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw, + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw, + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw, + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw, + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw, + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw, + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw, + [CLK_BUS_OTG] = &bus_otg_clk.common.hw, + [CLK_BUS_LRADC] = &bus_lradc_clk.common.hw, + [CLK_BUS_DPSS_TOP0] = &bus_dpss_top0_clk.common.hw, + [CLK_BUS_DPSS_TOP1] = &bus_dpss_top1_clk.common.hw, + [CLK_MIPI_DSI] = &mipi_dsi_clk.common.hw, + [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw, + [CLK_TCON_LCD] = &tcon_lcd_clk.common.hw, + [CLK_BUS_TCON_LCD] = &bus_tcon_lcd_clk.common.hw, + [CLK_LEDC] = &ledc_clk.common.hw, + [CLK_BUS_LEDC] = &bus_ledc_clk.common.hw, + [CLK_CSI_TOP] = &csi_top_clk.common.hw, + [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw, + [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw, + [CLK_BUS_CSI] = &bus_csi_clk.common.hw, + [CLK_CSI_ISP] = &csi_isp_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sun50i_a100_ccu_resets[] = { + [RST_MBUS] = { 0x540, BIT(30) }, + + [RST_BUS_DE] = { 0x60c, BIT(16) }, + [RST_BUS_G2D] = { 0x63c, BIT(16) }, + [RST_BUS_GPU] = { 0x67c, BIT(16) }, + [RST_BUS_CE] = { 0x68c, BIT(16) }, + [RST_BUS_VE] = { 0x69c, BIT(16) }, + [RST_BUS_DMA] = { 0x70c, BIT(16) }, + [RST_BUS_MSGBOX] = { 0x71c, BIT(16) }, + [RST_BUS_SPINLOCK] = { 0x72c, BIT(16) }, + [RST_BUS_HSTIMER] = { 0x73c, BIT(16) }, + [RST_BUS_DBG] = { 0x78c, BIT(16) }, + [RST_BUS_PSI] = { 0x79c, BIT(16) }, + [RST_BUS_PWM] = { 0x7ac, BIT(16) }, + [RST_BUS_DRAM] = { 0x80c, BIT(16) }, + [RST_BUS_NAND] = { 0x82c, BIT(16) }, + [RST_BUS_MMC0] = { 0x84c, BIT(16) }, + [RST_BUS_MMC1] = { 0x84c, BIT(17) }, + [RST_BUS_MMC2] = { 0x84c, BIT(18) }, + [RST_BUS_UART0] = { 0x90c, BIT(16) }, + [RST_BUS_UART1] = { 0x90c, BIT(17) }, + [RST_BUS_UART2] = { 0x90c, BIT(18) }, + [RST_BUS_UART3] = { 0x90c, BIT(19) }, + [RST_BUS_UART4] = { 0x90c, BIT(20) }, + [RST_BUS_I2C0] = { 0x91c, BIT(16) }, + [RST_BUS_I2C1] = { 0x91c, BIT(17) }, + [RST_BUS_I2C2] = { 0x91c, BIT(18) }, + [RST_BUS_I2C3] = { 0x91c, BIT(19) }, + [RST_BUS_SPI0] = { 0x96c, BIT(16) }, + [RST_BUS_SPI1] = { 0x96c, BIT(17) }, + [RST_BUS_SPI2] = { 0x96c, BIT(18) }, + [RST_BUS_EMAC] = { 0x97c, BIT(16) }, + [RST_BUS_IR_RX] = { 0x99c, BIT(16) }, + [RST_BUS_IR_TX] = { 0x9cc, BIT(16) }, + [RST_BUS_GPADC] = { 0x9ec, BIT(16) }, + [RST_BUS_THS] = { 0x9fc, BIT(16) }, + [RST_BUS_I2S0] = { 0xa20, BIT(16) }, + [RST_BUS_I2S1] = { 0xa20, BIT(17) }, + [RST_BUS_I2S2] = { 0xa20, BIT(18) }, + [RST_BUS_I2S3] = { 0xa20, BIT(19) }, + [RST_BUS_SPDIF] = { 0xa2c, BIT(16) }, + [RST_BUS_DMIC] = { 0xa4c, BIT(16) }, + [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) }, + + [RST_USB_PHY0] = { 0xa70, BIT(30) }, + [RST_USB_PHY1] = { 0xa74, BIT(30) }, + + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) }, + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) }, + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) }, + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) }, + [RST_BUS_OTG] = { 0xa8c, BIT(24) }, + + [RST_BUS_LRADC] = { 0xa9c, BIT(16) }, + [RST_BUS_DPSS_TOP0] = { 0xabc, BIT(16) }, + [RST_BUS_DPSS_TOP1] = { 0xacc, BIT(16) }, + [RST_BUS_MIPI_DSI] = { 0xb4c, BIT(16) }, + [RST_BUS_TCON_LCD] = { 0xb7c, BIT(16) }, + [RST_BUS_LVDS] = { 0xbac, BIT(16) }, + [RST_BUS_LEDC] = { 0xbfc, BIT(16) }, + [RST_BUS_CSI] = { 0xc1c, BIT(16) }, + [RST_BUS_CSI_ISP] = { 0xc2c, BIT(16) }, +}; + +static const struct sunxi_ccu_desc sun50i_a100_ccu_desc = { + .ccu_clks = sun50i_a100_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sun50i_a100_ccu_clks), + + .hw_clks = &sun50i_a100_hw_clks, + + .resets = sun50i_a100_ccu_resets, + .num_resets = ARRAY_SIZE(sun50i_a100_ccu_resets), +}; + +static const u32 sun50i_a100_pll_regs[] = { + SUN50I_A100_PLL_CPUX_REG, + SUN50I_A100_PLL_DDR0_REG, + SUN50I_A100_PLL_PERIPH0_REG, + SUN50I_A100_PLL_PERIPH1_REG, + SUN50I_A100_PLL_GPU_REG, + SUN50I_A100_PLL_VIDEO0_REG, + SUN50I_A100_PLL_VIDEO1_REG, + SUN50I_A100_PLL_VIDEO2_REG, + SUN50I_A100_PLL_VIDEO3_REG, + SUN50I_A100_PLL_VE_REG, + SUN50I_A100_PLL_COM_REG, + SUN50I_A100_PLL_AUDIO_REG, +}; + +static const u32 sun50i_a100_pll_video_regs[] = { + SUN50I_A100_PLL_VIDEO0_REG, + SUN50I_A100_PLL_VIDEO1_REG, + SUN50I_A100_PLL_VIDEO2_REG, + SUN50I_A100_PLL_VIDEO3_REG, +}; + +static const u32 sun50i_a100_usb2_clk_regs[] = { + SUN50I_A100_USB0_CLK_REG, + SUN50I_A100_USB1_CLK_REG, +}; + +static struct ccu_pll_nb sun50i_a100_pll_cpu_nb = { + .common = &pll_cpux_clk.common, + /* copy from pll_cpux_clk */ + .enable = BIT(27), + .lock = BIT(28), +}; + +static struct ccu_mux_nb sun50i_a100_cpu_nb = { + .common = &cpux_clk.common, + .cm = &cpux_clk.mux, + .delay_us = 1, + .bypass_index = 4, /* index of pll periph0 */ +}; + +static int sun50i_a100_ccu_probe(struct platform_device *pdev) +{ + void __iomem *reg; + u32 val; + int i, ret; + + reg = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + /* + * Enable lock and enable bits on all PLLs. + * + * Due to the current design, multiple PLLs share one power switch, + * so switching PLL is easy to cause stability problems. + * When initializing, we enable them by default. When disable, + * we only turn off the output of PLL. + */ + for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_regs); i++) { + val = readl(reg + sun50i_a100_pll_regs[i]); + val |= SUN50I_A100_PLL_LOCK_ENABLE | SUN50I_A100_PLL_ENABLE; + writel(val, reg + sun50i_a100_pll_regs[i]); + } + + /* + * In order to pass the EMI certification, the SDM function of + * the peripheral 1 bus is enabled, and the frequency is still + * calculated using the previous division factor. + */ + writel(SUN50I_A100_PLL_PERIPH1_PATTERN0, + reg + SUN50I_A100_PLL_PERIPH1_PATTERN0_REG); + + val = readl(reg + SUN50I_A100_PLL_PERIPH1_REG); + val |= SUN50I_A100_PLL_SDM_ENABLE; + writel(val, reg + SUN50I_A100_PLL_PERIPH1_REG); + + /* + * Force the output divider of video PLLs to 0. + * + * See the comment before pll-video0 definition for the reason. + */ + for (i = 0; i < ARRAY_SIZE(sun50i_a100_pll_video_regs); i++) { + val = readl(reg + sun50i_a100_pll_video_regs[i]); + val &= ~BIT(0); + writel(val, reg + sun50i_a100_pll_video_regs[i]); + } + + /* + * Enforce m1 = 0, m0 = 1 for Audio PLL + * + * See the comment before pll-audio definition for the reason. + */ + val = readl(reg + SUN50I_A100_PLL_AUDIO_REG); + val &= ~BIT(1); + val |= BIT(0); + writel(val, reg + SUN50I_A100_PLL_AUDIO_REG); + + /* + * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) + * + * This clock mux is still mysterious, and the code just enforces + * it to have a valid clock parent. + */ + for (i = 0; i < ARRAY_SIZE(sun50i_a100_usb2_clk_regs); i++) { + val = readl(reg + sun50i_a100_usb2_clk_regs[i]); + val &= ~GENMASK(25, 24); + writel(val, reg + sun50i_a100_usb2_clk_regs[i]); + } + + ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a100_ccu_desc); + if (ret) + return ret; + + /* Gate then ungate PLL CPU after any rate changes */ + ccu_pll_notifier_register(&sun50i_a100_pll_cpu_nb); + + /* Reparent CPU during PLL CPU rate changes */ + ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, + &sun50i_a100_cpu_nb); + + return 0; +} + +static const struct of_device_id sun50i_a100_ccu_ids[] = { + { .compatible = "allwinner,sun50i-a100-ccu" }, + { } +}; + +static struct platform_driver sun50i_a100_ccu_driver = { + .probe = sun50i_a100_ccu_probe, + .driver = { + .name = "sun50i-a100-ccu", + .of_match_table = sun50i_a100_ccu_ids, + }, +}; +module_platform_driver(sun50i_a100_ccu_driver); diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.h b/drivers/clk/sunxi-ng/ccu-sun50i-a100.h new file mode 100644 index 0000000..a599320 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Frank Lee + */ + +#ifndef _CCU_SUN50I_A100_H_ +#define _CCU_SUN50I_A100_H_ + +#include +#include + +#define CLK_OSC12M 0 +#define CLK_PLL_CPUX 1 +#define CLK_PLL_DDR0 2 + +/* PLL_PERIPH0 exported for PRCM */ + +#define CLK_PLL_PERIPH0_2X 4 +#define CLK_PLL_PERIPH1 5 +#define CLK_PLL_PERIPH1_2X 6 +#define CLK_PLL_GPU 7 +#define CLK_PLL_VIDEO0 8 +#define CLK_PLL_VIDEO0_2X 9 +#define CLK_PLL_VIDEO0_4X 10 +#define CLK_PLL_VIDEO1 11 +#define CLK_PLL_VIDEO1_2X 12 +#define CLK_PLL_VIDEO1_4X 13 +#define CLK_PLL_VIDEO2 14 +#define CLK_PLL_VIDEO2_2X 15 +#define CLK_PLL_VIDEO2_4X 16 +#define CLK_PLL_VIDEO3 17 +#define CLK_PLL_VIDEO3_2X 18 +#define CLK_PLL_VIDEO3_4X 19 +#define CLK_PLL_VE 20 +#define CLK_PLL_COM 21 +#define CLK_PLL_COM_AUDIO 22 +#define CLK_PLL_AUDIO 23 + +/* CPUX clock exported for DVFS */ + +#define CLK_AXI 25 +#define CLK_CPUX_APB 26 +#define CLK_PSI_AHB1_AHB2 27 +#define CLK_AHB3 28 + +/* APB1 clock exported for PIO */ + +#define CLK_APB2 30 + +/* All module clocks and bus gates are exported except DRAM */ + +#define CLK_BUS_DRAM 58 + +#define CLK_NUMBER (CLK_CSI_ISP + 1) + +#endif /* _CCU_SUN50I_A100_H_ */ diff --git a/include/dt-bindings/clock/sun50i-a100-ccu.h b/include/dt-bindings/clock/sun50i-a100-ccu.h new file mode 100644 index 0000000..8cdf563 --- /dev/null +++ b/include/dt-bindings/clock/sun50i-a100-ccu.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (c) 2020 Frank Lee + */ + +#ifndef _DT_BINDINGS_CLK_SUN50I_A100_H_ +#define _DT_BINDINGS_CLK_SUN50I_A100_H_ + +#define CLK_PLL_PERIPH0 3 + +#define CLK_CPUX 24 + +#define CLK_APB1 29 + +#define CLK_MBUS 31 +#define CLK_DE 32 +#define CLK_BUS_DE 33 +#define CLK_G2D 34 +#define CLK_BUS_G2D 35 +#define CLK_GPU 36 +#define CLK_BUS_GPU 37 +#define CLK_CE 38 +#define CLK_BUS_CE 39 +#define CLK_VE 40 +#define CLK_BUS_VE 41 +#define CLK_BUS_DMA 42 +#define CLK_BUS_MSGBOX 43 +#define CLK_BUS_SPINLOCK 44 +#define CLK_BUS_HSTIMER 45 +#define CLK_AVS 46 +#define CLK_BUS_DBG 47 +#define CLK_BUS_PSI 48 +#define CLK_BUS_PWM 49 +#define CLK_BUS_IOMMU 50 +#define CLK_MBUS_DMA 51 +#define CLK_MBUS_VE 52 +#define CLK_MBUS_CE 53 +#define CLK_MBUS_NAND 54 +#define CLK_MBUS_CSI 55 +#define CLK_MBUS_ISP 56 +#define CLK_MBUS_G2D 57 + +#define CLK_NAND0 59 +#define CLK_NAND1 60 +#define CLK_BUS_NAND 61 +#define CLK_MMC0 62 +#define CLK_MMC1 63 +#define CLK_MMC2 64 +#define CLK_MMC3 65 +#define CLK_BUS_MMC0 66 +#define CLK_BUS_MMC1 67 +#define CLK_BUS_MMC2 68 +#define CLK_BUS_UART0 69 +#define CLK_BUS_UART1 70 +#define CLK_BUS_UART2 71 +#define CLK_BUS_UART3 72 +#define CLK_BUS_UART4 73 +#define CLK_BUS_I2C0 74 +#define CLK_BUS_I2C1 75 +#define CLK_BUS_I2C2 76 +#define CLK_BUS_I2C3 77 +#define CLK_SPI0 78 +#define CLK_SPI1 79 +#define CLK_SPI2 80 +#define CLK_BUS_SPI0 81 +#define CLK_BUS_SPI1 82 +#define CLK_BUS_SPI2 83 +#define CLK_EMAC_25M 84 +#define CLK_BUS_EMAC 85 +#define CLK_IR_RX 86 +#define CLK_BUS_IR_RX 87 +#define CLK_IR_TX 88 +#define CLK_BUS_IR_TX 89 +#define CLK_BUS_GPADC 90 +#define CLK_BUS_THS 91 +#define CLK_I2S0 92 +#define CLK_I2S1 93 +#define CLK_I2S2 94 +#define CLK_I2S3 95 +#define CLK_BUS_I2S0 96 +#define CLK_BUS_I2S1 97 +#define CLK_BUS_I2S2 98 +#define CLK_BUS_I2S3 99 +#define CLK_SPDIF 100 +#define CLK_BUS_SPDIF 101 +#define CLK_DMIC 102 +#define CLK_BUS_DMIC 103 +#define CLK_AUDIO_DAC 104 +#define CLK_AUDIO_ADC 105 +#define CLK_AUDIO_4X 106 +#define CLK_BUS_AUDIO_CODEC 107 +#define CLK_USB_OHCI0 108 +#define CLK_USB_PHY0 109 +#define CLK_USB_OHCI1 110 +#define CLK_USB_PHY1 111 +#define CLK_BUS_OHCI0 112 +#define CLK_BUS_OHCI1 113 +#define CLK_BUS_EHCI0 114 +#define CLK_BUS_EHCI1 115 +#define CLK_BUS_OTG 116 +#define CLK_BUS_LRADC 117 +#define CLK_BUS_DPSS_TOP0 118 +#define CLK_BUS_DPSS_TOP1 119 +#define CLK_MIPI_DSI 120 +#define CLK_BUS_MIPI_DSI 121 +#define CLK_TCON_LCD 122 +#define CLK_BUS_TCON_LCD 123 +#define CLK_LEDC 124 +#define CLK_BUS_LEDC 125 +#define CLK_CSI_TOP 126 +#define CLK_CSI0_MCLK 127 +#define CLK_CSI1_MCLK 128 +#define CLK_BUS_CSI 129 +#define CLK_CSI_ISP 130 + +#endif /* _DT_BINDINGS_CLK_SUN50I_A100_H_ */ diff --git a/include/dt-bindings/clock/sun50i-a100-r-ccu.h b/include/dt-bindings/clock/sun50i-a100-r-ccu.h new file mode 100644 index 0000000..8a6cc5c --- /dev/null +++ b/include/dt-bindings/clock/sun50i-a100-r-ccu.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 Frank Lee + */ + +#ifndef _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_ +#define _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_ + +#define CLK_R_APB1 2 + +#define CLK_R_APB1_TIMER 4 +#define CLK_R_APB1_TWD 5 +#define CLK_R_APB1_PWM 6 +#define CLK_R_APB1_BUS_PWM 7 +#define CLK_R_APB1_PPU 8 +#define CLK_R_APB2_UART 9 +#define CLK_R_APB2_I2C0 10 +#define CLK_R_APB2_I2C1 11 +#define CLK_R_APB1_IR 12 +#define CLK_R_APB1_BUS_IR 13 +#define CLK_R_AHB_BUS_RTC 14 + +#endif /* _DT_BINDINGS_CLK_SUN50I_A100_R_CCU_H_ */ diff --git a/include/dt-bindings/reset/sun50i-a100-ccu.h b/include/dt-bindings/reset/sun50i-a100-ccu.h new file mode 100644 index 0000000..17b8b66 --- /dev/null +++ b/include/dt-bindings/reset/sun50i-a100-ccu.h @@ -0,0 +1,68 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (c) 2020 Frank Lee + */ + +#ifndef _DT_BINDINGS_RESET_SUN50I_A100_H_ +#define _DT_BINDINGS_RESET_SUN50I_A100_H_ + +#define RST_MBUS 0 +#define RST_BUS_DE 1 +#define RST_BUS_G2D 2 +#define RST_BUS_GPU 3 +#define RST_BUS_CE 4 +#define RST_BUS_VE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_MSGBOX 7 +#define RST_BUS_SPINLOCK 8 +#define RST_BUS_HSTIMER 9 +#define RST_BUS_DBG 10 +#define RST_BUS_PSI 11 +#define RST_BUS_PWM 12 +#define RST_BUS_DRAM 13 +#define RST_BUS_NAND 14 +#define RST_BUS_MMC0 15 +#define RST_BUS_MMC1 16 +#define RST_BUS_MMC2 17 +#define RST_BUS_UART0 18 +#define RST_BUS_UART1 19 +#define RST_BUS_UART2 20 +#define RST_BUS_UART3 21 +#define RST_BUS_UART4 22 +#define RST_BUS_I2C0 23 +#define RST_BUS_I2C1 24 +#define RST_BUS_I2C2 25 +#define RST_BUS_I2C3 26 +#define RST_BUS_SPI0 27 +#define RST_BUS_SPI1 28 +#define RST_BUS_SPI2 29 +#define RST_BUS_EMAC 30 +#define RST_BUS_IR_RX 31 +#define RST_BUS_IR_TX 32 +#define RST_BUS_GPADC 33 +#define RST_BUS_THS 34 +#define RST_BUS_I2S0 35 +#define RST_BUS_I2S1 36 +#define RST_BUS_I2S2 37 +#define RST_BUS_I2S3 38 +#define RST_BUS_SPDIF 39 +#define RST_BUS_DMIC 40 +#define RST_BUS_AUDIO_CODEC 41 +#define RST_USB_PHY0 42 +#define RST_USB_PHY1 43 +#define RST_BUS_OHCI0 44 +#define RST_BUS_OHCI1 45 +#define RST_BUS_EHCI0 46 +#define RST_BUS_EHCI1 47 +#define RST_BUS_OTG 48 +#define RST_BUS_LRADC 49 +#define RST_BUS_DPSS_TOP0 50 +#define RST_BUS_DPSS_TOP1 51 +#define RST_BUS_MIPI_DSI 52 +#define RST_BUS_TCON_LCD 53 +#define RST_BUS_LVDS 54 +#define RST_BUS_LEDC 55 +#define RST_BUS_CSI 56 +#define RST_BUS_CSI_ISP 57 + +#endif /* _DT_BINDINGS_RESET_SUN50I_A100_H_ */ diff --git a/include/dt-bindings/reset/sun50i-a100-r-ccu.h b/include/dt-bindings/reset/sun50i-a100-r-ccu.h new file mode 100644 index 0000000..2bf1ed4 --- /dev/null +++ b/include/dt-bindings/reset/sun50i-a100-r-ccu.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (c) 2020 Frank Lee + */ + +#ifndef _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_ +#define _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_ + +#define RST_R_APB1_TIMER 0 +#define RST_R_APB1_BUS_PWM 1 +#define RST_R_APB1_PPU 2 +#define RST_R_APB2_UART 3 +#define RST_R_APB2_I2C0 4 +#define RST_R_APB2_I2C1 5 +#define RST_R_APB1_BUS_IR 6 +#define RST_R_AHB_BUS_RTC 7 + +#endif /* _DT_BINDINGS_RST_SUN50I_A100_R_CCU_H_ */