diff mbox series

[v4,7/7] drivers: thermal: tsens: add set_trip support for 8960

Message ID 20200716022817.30439-8-ansuelsmth@gmail.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add support for ipq8064 tsens | expand

Commit Message

Christian Marangi July 16, 2020, 2:28 a.m. UTC
Add custom set_trip function for 8960 needed to set trip point to the
tsens driver for 8960 driver.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/thermal/qcom/tsens-8960.c | 78 +++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

Comments

Amit Kucheria July 20, 2020, 9:51 a.m. UTC | #1
Hi Ansuel,

On Thu, Jul 16, 2020 at 7:58 AM Ansuel Smith <ansuelsmth@gmail.com> wrote:
>
> Add custom set_trip function for 8960 needed to set trip point to the
> tsens driver for 8960 driver.

Please describe why it needs a custom function please.

>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/thermal/qcom/tsens-8960.c | 78 +++++++++++++++++++++++++++++++
>  1 file changed, 78 insertions(+)
>
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index 20d0bfb10f1f..4ad65ab3fd18 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -93,6 +93,15 @@
>                                                 TSENS_8064_SENSOR9_EN | \
>                                                 TSENS_8064_SENSOR10_EN)
>
> +/* Trips: from very hot to very cold */
> +enum tsens_trip_type {
> +       TSENS_TRIP_STAGE3 = 0,
> +       TSENS_TRIP_STAGE2,
> +       TSENS_TRIP_STAGE1,
> +       TSENS_TRIP_STAGE0,
> +       TSENS_TRIP_NUM,
> +};
> +
>  u32 tsens_8960_slope[] = {
>                         1176, 1176, 1154, 1176,
>                         1111, 1132, 1132, 1199,
> @@ -110,6 +119,16 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
>         return adc_code * slope + offset;
>  }
>
> +static int mdegC_to_code(int degC, const struct tsens_sensor *s)
> +{
> +       int slope, offset;
> +
> +       slope = thermal_zone_get_slope(s->tzd);
> +       offset = CAL_MDEGC - slope * s->offset;
> +
> +       return degC / slope - offset;
> +}
> +
>  static void notify_uspace_tsens_fn(struct work_struct *work)
>  {
>         struct tsens_sensor *s = container_of(work, struct tsens_sensor,
> @@ -448,6 +467,64 @@ static int get_temp_8960(const struct tsens_sensor *s, int *temp)
>         return -ETIMEDOUT;
>  }
>
> +static int set_trip_temp_ipq8064(void *data, int trip, int temp)
> +{
> +       unsigned int reg_th, reg_cntl;
> +       int ret, code, code_chk, hi_code, lo_code;
> +       const struct tsens_sensor *s = data;
> +       struct tsens_priv *priv = s->priv;
> +
> +       code = mdegC_to_code(temp, s);
> +       code_chk = code;
> +
> +       if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
> +               return -EINVAL;
> +
> +       ret = regmap_read(priv->tm_map, STATUS_CNTL_ADDR_8064, &reg_cntl);
> +       if (ret)
> +               return ret;
> +
> +       ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, &reg_th);
> +       if (ret)
> +               return ret;
> +
> +       hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
> +                       >> THRESHOLD_UPPER_LIMIT_SHIFT;
> +       lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
> +                       >> THRESHOLD_LOWER_LIMIT_SHIFT;
> +
> +       switch (trip) {
> +       case TSENS_TRIP_STAGE3:
> +               code <<= THRESHOLD_MAX_LIMIT_SHIFT;
> +               reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
> +               break;
> +       case TSENS_TRIP_STAGE2:
> +               if (code_chk <= lo_code)
> +                       return -EINVAL;
> +               code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
> +               reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
> +               break;
> +       case TSENS_TRIP_STAGE1:
> +               if (code_chk >= hi_code)
> +                       return -EINVAL;
> +               code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
> +               reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
> +               break;
> +       case TSENS_TRIP_STAGE0:
> +               code <<= THRESHOLD_MIN_LIMIT_SHIFT;
> +               reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
> +               break;
> +       default:
> +               return -EINVAL;
> +       }
> +
> +       ret = regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_th | code);
> +       if (ret)
> +               return ret;
> +
> +       return 0;
> +}
> +
>  static const struct tsens_ops ops_8960 = {
>         .init           = init_8960,
>         .calibrate      = calibrate_8960,
> @@ -456,6 +533,7 @@ static const struct tsens_ops ops_8960 = {
>         .disable        = disable_8960,
>         .suspend        = suspend_8960,
>         .resume         = resume_8960,
> +       .set_trip_temp  = set_trip_temp_ipq8064,
>  };
>
>  struct tsens_plat_data data_8960 = {
> --
> 2.27.0
>
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 20d0bfb10f1f..4ad65ab3fd18 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -93,6 +93,15 @@ 
 						TSENS_8064_SENSOR9_EN | \
 						TSENS_8064_SENSOR10_EN)
 
+/* Trips: from very hot to very cold */
+enum tsens_trip_type {
+	TSENS_TRIP_STAGE3 = 0,
+	TSENS_TRIP_STAGE2,
+	TSENS_TRIP_STAGE1,
+	TSENS_TRIP_STAGE0,
+	TSENS_TRIP_NUM,
+};
+
 u32 tsens_8960_slope[] = {
 			1176, 1176, 1154, 1176,
 			1111, 1132, 1132, 1199,
@@ -110,6 +119,16 @@  static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
 	return adc_code * slope + offset;
 }
 
+static int mdegC_to_code(int degC, const struct tsens_sensor *s)
+{
+	int slope, offset;
+
+	slope = thermal_zone_get_slope(s->tzd);
+	offset = CAL_MDEGC - slope * s->offset;
+
+	return degC / slope - offset;
+}
+
 static void notify_uspace_tsens_fn(struct work_struct *work)
 {
 	struct tsens_sensor *s = container_of(work, struct tsens_sensor,
@@ -448,6 +467,64 @@  static int get_temp_8960(const struct tsens_sensor *s, int *temp)
 	return -ETIMEDOUT;
 }
 
+static int set_trip_temp_ipq8064(void *data, int trip, int temp)
+{
+	unsigned int reg_th, reg_cntl;
+	int ret, code, code_chk, hi_code, lo_code;
+	const struct tsens_sensor *s = data;
+	struct tsens_priv *priv = s->priv;
+
+	code = mdegC_to_code(temp, s);
+	code_chk = code;
+
+	if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
+		return -EINVAL;
+
+	ret = regmap_read(priv->tm_map, STATUS_CNTL_ADDR_8064, &reg_cntl);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, &reg_th);
+	if (ret)
+		return ret;
+
+	hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
+			>> THRESHOLD_UPPER_LIMIT_SHIFT;
+	lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
+			>> THRESHOLD_LOWER_LIMIT_SHIFT;
+
+	switch (trip) {
+	case TSENS_TRIP_STAGE3:
+		code <<= THRESHOLD_MAX_LIMIT_SHIFT;
+		reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
+		break;
+	case TSENS_TRIP_STAGE2:
+		if (code_chk <= lo_code)
+			return -EINVAL;
+		code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
+		reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
+		break;
+	case TSENS_TRIP_STAGE1:
+		if (code_chk >= hi_code)
+			return -EINVAL;
+		code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
+		reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
+		break;
+	case TSENS_TRIP_STAGE0:
+		code <<= THRESHOLD_MIN_LIMIT_SHIFT;
+		reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_th | code);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static const struct tsens_ops ops_8960 = {
 	.init		= init_8960,
 	.calibrate	= calibrate_8960,
@@ -456,6 +533,7 @@  static const struct tsens_ops ops_8960 = {
 	.disable	= disable_8960,
 	.suspend	= suspend_8960,
 	.resume		= resume_8960,
+	.set_trip_temp	= set_trip_temp_ipq8064,
 };
 
 struct tsens_plat_data data_8960 = {