diff mbox series

[v3,02/10] dt-bindings: thermal: qcom: add adc-thermal monitor bindings

Message ID 20200909144248.54327-3-dmitry.baryshkov@linaro.org (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series qcom: pm8150: add support for thermal monitoring | expand

Commit Message

Dmitry Baryshkov Sept. 9, 2020, 2:42 p.m. UTC
Add bindings for thermal monitor, part of Qualcomm PMIC5 chips. It is a
close counterpart of VADC part of those PMICs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../bindings/thermal/qcom-spmi-adc-tm5.yaml   | 141 ++++++++++++++++++
 1 file changed, 141 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml

Comments

Jonathan Cameron Sept. 9, 2020, 6:22 p.m. UTC | #1
On Wed,  9 Sep 2020 17:42:40 +0300
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote:

> Add bindings for thermal monitor, part of Qualcomm PMIC5 chips. It is a
> close counterpart of VADC part of those PMICs.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
One trivial comment inline but only if you are respinning this patch anyway.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  .../bindings/thermal/qcom-spmi-adc-tm5.yaml   | 141 ++++++++++++++++++
>  1 file changed, 141 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> new file mode 100644
> index 000000000000..b3818357808b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> @@ -0,0 +1,141 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's SPMI PMIC ADC-TM

If you happen to be respinning this, perhaps say what TM is? That
acronym is a bit less obvious to me at least than the others.

> +maintainers:
> +  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> +
> +properties:
> +  compatible:
> +    const: qcom,spmi-adc-tm5
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  "#thermal-sensor-cells":
> +    const: 1
> +    description:
> +      Number of cells required to uniquely identify the thermal sensors. Since
> +      we have multiple sensors this is set to 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  qcom,avg-samples:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Number of samples to be used for measurement.
> +    enum:
> +      - 1
> +      - 2
> +      - 4
> +      - 8
> +      - 16
> +    default: 1
> +
> +  qcom,decimation:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: This parameter is used to decrease ADC sampling rate.
> +            Quicker measurements can be made by reducing decimation ratio.
> +    enum:
> +      - 250
> +      - 420
> +      - 840
> +    default: 840
> +
> +patternProperties:
> +  "^([-a-z0-9]*)@[0-9]+$":
> +    type: object
> +    description:
> +      Represent one thermal sensor.
> +
> +    properties:
> +      reg:
> +        description: Specify the sensor channel.
> +        maxItems: 1
> +
> +      io-channels:
> +        description:
> +          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
> +
> +      qcom,adc-channel:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Corresponding ADC channel ID.
> +
> +      qcom,ratiometric:
> +        $ref: /schemas/types.yaml#/definitions/flag
> +        description:
> +          Channel calibration type.
> +          If this property is specified VADC will use the VDD reference
> +          (1.875V) and GND for channel calibration. If property is not found,
> +          channel will be calibrated with 0V and 1.25V reference channels,
> +          also known as absolute calibration.
> +
> +      qcom,hw-settle-time:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Time between AMUX getting configured and the ADC starting conversion.
> +
> +      qcom,pre-scaling:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array
> +        description: Used for scaling the channel input signal before the
> +          signal is fed to VADC. See qcom,spi-vadc specification for the list
> +          of possible values.
> +        minItems: 2
> +        maxItems: 2
> +
> +    required:
> +      - reg
> +      - qcom,adc-channel
> +
> +    additionalProperties:
> +      false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#address-cells"
> +  - "#size-cells"
> +  - "#thermal-sensor-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/iio/qcom,spmi-vadc.h>
> +        #include <dt-bindings/interrupt-controller/irq.h>
> +        pm8150b_adc: adc@3100 {
> +            compatible = "qcom,spmi-adc5";
> +            /* Other propreties are omitted */
> +            conn-therm@4f {
> +                reg = <ADC5_AMUX_THM3_100K_PU>;
> +                qcom,ratiometric;
> +                qcom,hw-settle-time = <200>;
> +            };
> +        };
> +
> +        pm8150b_adc_tm: adc-tm@3500 {
> +            compatible = "qcom,spmi-adc-tm5";
> +            reg = <0x3500>;
> +            interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
> +            #thermal-sensor-cells = <1>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            conn-therm@0 {
> +                reg = <0>;
> +                io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
> +                qcom,adc-channel = <ADC5_AMUX_THM3_100K_PU>;
> +                qcom,ratiometric;
> +                qcom,hw-settle-time = <200>;
> +            };
> +        };
> +...
Rob Herring (Arm) Sept. 9, 2020, 8:51 p.m. UTC | #2
On Wed, 09 Sep 2020 17:42:40 +0300, Dmitry Baryshkov wrote:
> Add bindings for thermal monitor, part of Qualcomm PMIC5 chips. It is a
> close counterpart of VADC part of those PMICs.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  .../bindings/thermal/qcom-spmi-adc-tm5.yaml   | 141 ++++++++++++++++++
>  1 file changed, 141 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dts:25.17-30: Warning (reg_format): /example-0/adc@3100/conn-therm@4f:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dts:33.13-28: Warning (reg_format): /example-0/adc-tm@3500:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dts:21.31-29.11: Warning (unit_address_vs_reg): /example-0/adc@3100: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dts:24.27-28.15: Warning (avoid_default_addr_size): /example-0/adc@3100/conn-therm@4f: Relying on default #address-cells value
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dts:24.27-28.15: Warning (avoid_default_addr_size): /example-0/adc@3100/conn-therm@4f: Relying on default #size-cells value
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dts:39.26-45.15: Warning (io_channels_property): /example-0/adc-tm@3500/conn-therm@0: Missing property '#io-channel-cells' in node /example-0/adc@3100 or bad phandle (referred from io-channels[0])
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: example-0: adc-tm@3500:reg:0: [13568] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: adc@3100: 'reg' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: adc@3100: '#address-cells' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: adc@3100: '#size-cells' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.example.dt.yaml: adc@3100: '#io-channel-cells' is a required property
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml


See https://patchwork.ozlabs.org/patch/1360722

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
new file mode 100644
index 000000000000..b3818357808b
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -0,0 +1,141 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC-TM
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,spmi-adc-tm5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+    enum:
+      - 250
+      - 420
+      - 840
+    default: 840
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-9]+$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor channel.
+        maxItems: 1
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,adc-channel:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Corresponding ADC channel ID.
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Time between AMUX getting configured and the ADC starting conversion.
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. See qcom,spi-vadc specification for the list
+          of possible values.
+        minItems: 2
+        maxItems: 2
+
+    required:
+      - reg
+      - qcom,adc-channel
+
+    additionalProperties:
+      false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/iio/qcom,spmi-vadc.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        pm8150b_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            /* Other propreties are omitted */
+            conn-therm@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        pm8150b_adc_tm: adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            conn-therm@0 {
+                reg = <0>;
+                io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,adc-channel = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+...