| Message ID | 20200917032226.820371-2-thara.gopinath@linaro.org (mailing list archive) |
|---|---|
| State | RFC, archived |
| Headers | show |
| Series | Introduce warming in thermal framework | expand |
On Wed, Sep 16, 2020 at 11:22:19PM -0400, Thara Gopinath wrote: > Introduce a new binding parameter to thermal trip point description > to indicate whether the temperature level specified by the trip point > is monitored for a rise or fall in temperature. > > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > --- > .../devicetree/bindings/thermal/thermal-zones.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > index 3ec9cc87ec50..cc1332ad6c16 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml > @@ -161,6 +161,13 @@ patternProperties: > The active trip type can be used to control other HW to > help in cooling e.g. fans can be sped up or slowed down > > + monitor-falling: > + description: | > + boolean, If true, the trip point is being monitored for > + falling temperature. If false/absent/default, the trip > + point is being monitored for rising temperature. > + type: boolean What if you wanted to monitor for both? > + > required: > - temperature > - hysteresis > -- > 2.25.1 >
Hi Rob, Thanks for the review. On 9/23/20 12:03 PM, Rob Herring wrote: > On Wed, Sep 16, 2020 at 11:22:19PM -0400, Thara Gopinath wrote: >> Introduce a new binding parameter to thermal trip point description >> to indicate whether the temperature level specified by the trip point >> is monitored for a rise or fall in temperature. >> >> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> >> --- >> .../devicetree/bindings/thermal/thermal-zones.yaml | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml >> index 3ec9cc87ec50..cc1332ad6c16 100644 >> --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml >> +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml >> @@ -161,6 +161,13 @@ patternProperties: >> The active trip type can be used to control other HW to >> help in cooling e.g. fans can be sped up or slowed down >> >> + monitor-falling: >> + description: | >> + boolean, If true, the trip point is being monitored for >> + falling temperature. If false/absent/default, the trip >> + point is being monitored for rising temperature. >> + type: boolean > > What if you wanted to monitor for both? You usually don't want to. At really low temperature trip (5 degree C or 0 degree C) you care about starting to monitor when the temperature falls below the trip. At high temp trip points, you care about starting to monitor when the temperature rises above the trip point. The thermal framework takes care of stopping the monitoring (dependent on type of monitoring, hysteresis etc.) > >> + >> required: >> - temperature >> - hysteresis >> -- >> 2.25.1 >>
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 3ec9cc87ec50..cc1332ad6c16 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -161,6 +161,13 @@ patternProperties: The active trip type can be used to control other HW to help in cooling e.g. fans can be sped up or slowed down + monitor-falling: + description: | + boolean, If true, the trip point is being monitored for + falling temperature. If false/absent/default, the trip + point is being monitored for rising temperature. + type: boolean + required: - temperature - hysteresis
Introduce a new binding parameter to thermal trip point description to indicate whether the temperature level specified by the trip point is monitored for a rise or fall in temperature. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> --- .../devicetree/bindings/thermal/thermal-zones.yaml | 7 +++++++ 1 file changed, 7 insertions(+)