diff mbox series

[RFD] thermal: core: Browse the trip points in reverse order and exit

Message ID 20201206123753.28440-1-daniel.lezcano@linaro.org (mailing list archive)
State New
Delegated to: Zhang Rui
Headers show
Series [RFD] thermal: core: Browse the trip points in reverse order and exit | expand

Commit Message

Daniel Lezcano Dec. 6, 2020, 12:37 p.m. UTC
When reading the code it is unclear if the loop is there to handle one
trip point or all the trip points above a certain temperature.

With the current code, the throttle function is called for every trip
point crossed and it is ambiguous if that is made on purpose.

Even digging into the history up to April, 16th 2015, the initial git
import of the acpi implementation of the loop before being converted
into a generic code, it is unclear if all trip points must be handled
or not.

When the code was intially written, was it assuming there can be only
one passive or active trip point ?

The cooling effect of the system will be very different depending on
how this loop is considered.

Even the IPA governor is filtering out multiple trip points to stick
to one value. Was the code to accomodate with a bogus loop and based
on the multiple non-critical trip points ?

Another example: arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
defines 7 passive trip points, each of them mapped to the *same*
cooling device but with different min-max states. That means the
handle trip points loop will go through all these seven trip points
and change the state of the cooling device seven times.

On the other hand, a thermal zone can have two different cooling
devices mapped to two trip points, shall we consider having both
cooling devices acting together when the second trip point is crossed
(eg. 1st trip point: cpufreq cooling device + 2nd trip point: fan), or
the second cooling device takes over the first one ? IOW, combine the
cooling effects or not ?

Depending on the expected behavior, the loop can be done in the
reverse order and exit after processing the highest trip point.

Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 9d6a7b7f8ab4..d745b62a63af 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -562,8 +562,9 @@  void thermal_zone_device_update(struct thermal_zone_device *tz,
 
 	tz->notify_event = event;
 
-	for (count = 0; count < tz->trips; count++)
-		handle_thermal_trip(tz, count);
+	for (count = tz->trips - 1; count >= 0; count--)
+		if (handle_thermal_trip(tz, count))
+			break;
 
 	monitor_thermal_zone(tz);
 }