| Message ID | 20201214233811.485669-4-daniel.lezcano@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Zhang Rui |
| Headers | show |
| Series | [1/6] thermal/core: Remove the 'forced_passive' option | expand |
Hi Rui, On 15/12/2020 00:38, Daniel Lezcano wrote: > The loop is here to create default cooling device binding on the > THERMAL_TRIPS_NONE number which is used to be the 'forced_passive' > feature. However, we removed all code dealing with that in the thermal > core, thus this binding does no longer make sense. > > Remove it. > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Are you fine with this change? Thanks -- Daniel > --- > drivers/acpi/thermal.c | 19 ------------------- > 1 file changed, 19 deletions(-) > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > index b5e4bc9e3282..26a89ff80a0e 100644 > --- a/drivers/acpi/thermal.c > +++ b/drivers/acpi/thermal.c > @@ -764,25 +764,6 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, > } > } > > - for (i = 0; i < tz->devices.count; i++) { > - handle = tz->devices.handles[i]; > - status = acpi_bus_get_device(handle, &dev); > - if (ACPI_SUCCESS(status) && (dev == device)) { > - if (bind) > - result = thermal_zone_bind_cooling_device > - (thermal, THERMAL_TRIPS_NONE, > - cdev, THERMAL_NO_LIMIT, > - THERMAL_NO_LIMIT, > - THERMAL_WEIGHT_DEFAULT); > - else > - result = thermal_zone_unbind_cooling_device > - (thermal, THERMAL_TRIPS_NONE, > - cdev); > - if (result) > - goto failed; > - } > - } > - > failed: > return result; > } >
ACPI thermal driver binds the devices listed in _TZD method with THERMAL_TRIPS_NONE. Now given that 1. THERMAL_TRIPS_NONE is removed from thermal framework 2. _TZP is rarely supported. I searched ~500 acpidumps from different platforms reported by end users in kernel Bugzilla, there is only one platform with _TZP implemented, and it was almost 10 years ago. So, I think it is safe to remove this piece of code. > -----Original Message----- > From: Daniel Lezcano <daniel.lezcano@linaro.org> > Sent: Tuesday, January 05, 2021 11:44 PM > To: Zhang, Rui <rui.zhang@intel.com> > Cc: mjg59@codon.org.uk; linux-pm@vger.kernel.org; linux- > kernel@vger.kernel.org; amitk@kernel.org; thara.gopinath@linaro.org; > Rafael J. Wysocki <rjw@rjwysocki.net>; Len Brown <lenb@kernel.org>; open > list:ACPI THERMAL DRIVER <linux-acpi@vger.kernel.org> > Subject: Re: [PATCH 4/6] acpi/drivers/thermal: Remove TRIPS_NONE cooling > device binding > Importance: High > > Hi Rui, > > > On 15/12/2020 00:38, Daniel Lezcano wrote: > > The loop is here to create default cooling device binding on the > > THERMAL_TRIPS_NONE number which is used to be the 'forced_passive' > > feature. However, we removed all code dealing with that in the thermal > > core, thus this binding does no longer make sense. > > > > Remove it. > > > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Thanks, rui > > Are you fine with this change? > > Thanks > > -- Daniel > > > --- > > drivers/acpi/thermal.c | 19 ------------------- > > 1 file changed, 19 deletions(-) > > > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index > > b5e4bc9e3282..26a89ff80a0e 100644 > > --- a/drivers/acpi/thermal.c > > +++ b/drivers/acpi/thermal.c > > @@ -764,25 +764,6 @@ static int acpi_thermal_cooling_device_cb(struct > thermal_zone_device *thermal, > > } > > } > > > > - for (i = 0; i < tz->devices.count; i++) { > > - handle = tz->devices.handles[i]; > > - status = acpi_bus_get_device(handle, &dev); > > - if (ACPI_SUCCESS(status) && (dev == device)) { > > - if (bind) > > - result = thermal_zone_bind_cooling_device > > - (thermal, > THERMAL_TRIPS_NONE, > > - cdev, THERMAL_NO_LIMIT, > > - THERMAL_NO_LIMIT, > > - > THERMAL_WEIGHT_DEFAULT); > > - else > > - result = > thermal_zone_unbind_cooling_device > > - (thermal, > THERMAL_TRIPS_NONE, > > - cdev); > > - if (result) > > - goto failed; > > - } > > - } > > - > > failed: > > return result; > > } > > > > > -- > <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs > > Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | > <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro- > blog/> Blog
On 07/01/2021 06:10, Zhang, Rui wrote: > ACPI thermal driver binds the devices listed in _TZD method with THERMAL_TRIPS_NONE. > Now given that > 1. THERMAL_TRIPS_NONE is removed from thermal framework > 2. _TZP is rarely supported. I searched ~500 acpidumps from different platforms reported by end users in kernel Bugzilla, there is only one platform with _TZP implemented, and it was almost 10 years ago. > > So, I think it is safe to remove this piece of code. Thanks Rui for digging into
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index b5e4bc9e3282..26a89ff80a0e 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -764,25 +764,6 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal, } } - for (i = 0; i < tz->devices.count; i++) { - handle = tz->devices.handles[i]; - status = acpi_bus_get_device(handle, &dev); - if (ACPI_SUCCESS(status) && (dev == device)) { - if (bind) - result = thermal_zone_bind_cooling_device - (thermal, THERMAL_TRIPS_NONE, - cdev, THERMAL_NO_LIMIT, - THERMAL_NO_LIMIT, - THERMAL_WEIGHT_DEFAULT); - else - result = thermal_zone_unbind_cooling_device - (thermal, THERMAL_TRIPS_NONE, - cdev); - if (result) - goto failed; - } - } - failed: return result; }
The loop is here to create default cooling device binding on the THERMAL_TRIPS_NONE number which is used to be the 'forced_passive' feature. However, we removed all code dealing with that in the thermal core, thus this binding does no longer make sense. Remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/acpi/thermal.c | 19 ------------------- 1 file changed, 19 deletions(-)