| Message ID | 20201228113507.1292506-3-timon.baetz@protonmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [v5,1/8] extcon: max8997: Add CHGINS and CHGRM interrupt handling | expand |
On Mon, Dec 28, 2020 at 11:36:02AM +0000, Timon Baetz wrote: > Register for extcon notification and set charging current depending on > the detected cable type. Current values are taken from vendor kernel, > where most charger types end up setting 650mA [0]. > > Also enable and disable the CHARGER regulator based on extcon events. > > [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678 > > Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> > --- > drivers/power/supply/max8997_charger.c | 96 ++++++++++++++++++++++++++ > 1 file changed, 96 insertions(+) > > diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c > index 1947af25879a..f0f725385dfc 100644 > --- a/drivers/power/supply/max8997_charger.c > +++ b/drivers/power/supply/max8997_charger.c > @@ -6,12 +6,14 @@ > // MyungJoo Ham <myungjoo.ham@samsung.com> > > #include <linux/err.h> > +#include <linux/extcon.h> > #include <linux/module.h> > #include <linux/slab.h> > #include <linux/platform_device.h> > #include <linux/power_supply.h> > #include <linux/mfd/max8997.h> > #include <linux/mfd/max8997-private.h> > +#include <linux/regulator/consumer.h> > > /* MAX8997_REG_STATUS4 */ > #define DCINOK_SHIFT 1 > @@ -31,6 +33,10 @@ struct charger_data { > struct device *dev; > struct max8997_dev *iodev; > struct power_supply *battery; > + struct regulator *reg; > + struct extcon_dev *edev; > + struct notifier_block extcon_nb; > + struct work_struct extcon_work; > }; > > static enum power_supply_property max8997_battery_props[] = { > @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy, > return 0; > } > > +static void max8997_battery_extcon_evt_stop_work(void *data) > +{ > + struct charger_data *charger = data; > + > + cancel_work_sync(&charger->extcon_work); > +} > + > +static void max8997_battery_extcon_evt_worker(struct work_struct *work) > +{ > + struct charger_data *charger = > + container_of(work, struct charger_data, extcon_work); > + struct extcon_dev *edev = charger->edev; > + int current_limit; > + > + if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { > + dev_dbg(charger->dev, "USB SDP charger is connected\n"); > + current_limit = 450000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { > + dev_dbg(charger->dev, "USB DCP charger is connected\n"); > + current_limit = 650000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) { > + dev_dbg(charger->dev, "USB FAST charger is connected\n"); > + current_limit = 650000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) { > + dev_dbg(charger->dev, "USB SLOW charger is connected\n"); > + current_limit = 650000; > + } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { > + dev_dbg(charger->dev, "USB CDP charger is connected\n"); > + current_limit = 650000; > + } else { > + dev_dbg(charger->dev, "USB charger is diconnected\n"); > + current_limit = -1; > + } > + > + if (current_limit > 0) { > + int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit); > + > + if (ret) { > + dev_err(charger->dev, "failed to set current limit: %d\n", ret); > + return; > + } > + ret = regulator_enable(charger->reg); > + if (ret) > + dev_err(charger->dev, "failed to enable regulator: %d\n", ret); > + } else { > + int ret = regulator_disable(charger->reg); > + > + if (ret) > + dev_err(charger->dev, "failed to disable regulator: %d\n", ret); > + } > +} > + > +static int max8997_battery_extcon_evt(struct notifier_block *nb, > + unsigned long event, void *param) > +{ > + struct charger_data *charger = > + container_of(nb, struct charger_data, extcon_nb); > + schedule_work(&charger->extcon_work); > + return NOTIFY_OK; > +} > + > static const struct power_supply_desc max8997_battery_desc = { > .name = "max8997_pmic", > .type = POWER_SUPPLY_TYPE_BATTERY, > @@ -170,6 +237,35 @@ static int max8997_battery_probe(struct platform_device *pdev) > return PTR_ERR(charger->battery); > } > > + charger->reg = devm_regulator_get_optional(&pdev->dev, "charger"); > + if (IS_ERR(charger->reg)) { > + if (PTR_ERR(charger->reg) == -EPROBE_DEFER) > + return -EPROBE_DEFER; > + dev_err(&pdev->dev, "couldn't get charger regulator\n"); This should be dev_info, as we discussed. Otherwise it will scream on every boot with a DTS which does not have charger node. Best regards, Krzysztof
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c index 1947af25879a..f0f725385dfc 100644 --- a/drivers/power/supply/max8997_charger.c +++ b/drivers/power/supply/max8997_charger.c @@ -6,12 +6,14 @@ // MyungJoo Ham <myungjoo.ham@samsung.com> #include <linux/err.h> +#include <linux/extcon.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/power_supply.h> #include <linux/mfd/max8997.h> #include <linux/mfd/max8997-private.h> +#include <linux/regulator/consumer.h> /* MAX8997_REG_STATUS4 */ #define DCINOK_SHIFT 1 @@ -31,6 +33,10 @@ struct charger_data { struct device *dev; struct max8997_dev *iodev; struct power_supply *battery; + struct regulator *reg; + struct extcon_dev *edev; + struct notifier_block extcon_nb; + struct work_struct extcon_work; }; static enum power_supply_property max8997_battery_props[] = { @@ -88,6 +94,67 @@ static int max8997_battery_get_property(struct power_supply *psy, return 0; } +static void max8997_battery_extcon_evt_stop_work(void *data) +{ + struct charger_data *charger = data; + + cancel_work_sync(&charger->extcon_work); +} + +static void max8997_battery_extcon_evt_worker(struct work_struct *work) +{ + struct charger_data *charger = + container_of(work, struct charger_data, extcon_work); + struct extcon_dev *edev = charger->edev; + int current_limit; + + if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) { + dev_dbg(charger->dev, "USB SDP charger is connected\n"); + current_limit = 450000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) { + dev_dbg(charger->dev, "USB DCP charger is connected\n"); + current_limit = 650000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) { + dev_dbg(charger->dev, "USB FAST charger is connected\n"); + current_limit = 650000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) { + dev_dbg(charger->dev, "USB SLOW charger is connected\n"); + current_limit = 650000; + } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) { + dev_dbg(charger->dev, "USB CDP charger is connected\n"); + current_limit = 650000; + } else { + dev_dbg(charger->dev, "USB charger is diconnected\n"); + current_limit = -1; + } + + if (current_limit > 0) { + int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit); + + if (ret) { + dev_err(charger->dev, "failed to set current limit: %d\n", ret); + return; + } + ret = regulator_enable(charger->reg); + if (ret) + dev_err(charger->dev, "failed to enable regulator: %d\n", ret); + } else { + int ret = regulator_disable(charger->reg); + + if (ret) + dev_err(charger->dev, "failed to disable regulator: %d\n", ret); + } +} + +static int max8997_battery_extcon_evt(struct notifier_block *nb, + unsigned long event, void *param) +{ + struct charger_data *charger = + container_of(nb, struct charger_data, extcon_nb); + schedule_work(&charger->extcon_work); + return NOTIFY_OK; +} + static const struct power_supply_desc max8997_battery_desc = { .name = "max8997_pmic", .type = POWER_SUPPLY_TYPE_BATTERY, @@ -170,6 +237,35 @@ static int max8997_battery_probe(struct platform_device *pdev) return PTR_ERR(charger->battery); } + charger->reg = devm_regulator_get_optional(&pdev->dev, "charger"); + if (IS_ERR(charger->reg)) { + if (PTR_ERR(charger->reg) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(&pdev->dev, "couldn't get charger regulator\n"); + } + charger->edev = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(charger->edev)) { + if (PTR_ERR(charger->edev) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(charger->dev, "couldn't get extcon device\n"); + } + + if (!IS_ERR(charger->reg) && !IS_ERR(charger->edev)) { + INIT_WORK(&charger->extcon_work, max8997_battery_extcon_evt_worker); + ret = devm_add_action(&pdev->dev, max8997_battery_extcon_evt_stop_work, charger); + if (ret) { + dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret); + return ret; + } + charger->extcon_nb.notifier_call = max8997_battery_extcon_evt; + ret = devm_extcon_register_notifier_all(&pdev->dev, charger->edev, + &charger->extcon_nb); + if (ret) { + dev_err(&pdev->dev, "failed to register extcon notifier\n"); + return ret; + }; + } + return 0; }
Register for extcon notification and set charging current depending on the detected cable type. Current values are taken from vendor kernel, where most charger types end up setting 650mA [0]. Also enable and disable the CHARGER regulator based on extcon events. [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/misc/max8997-muic.c#L1675-L1678 Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> --- drivers/power/supply/max8997_charger.c | 96 ++++++++++++++++++++++++++ 1 file changed, 96 insertions(+)