diff mbox series

[4/4] thermal: ti-soc-thermal: Use non-inverted define for omap4

Message ID 20210205134534.49200-5-tony@atomide.com (mailing list archive)
State New
Delegated to: Daniel Lezcano
Headers show
Series Thermal fixes for omaps for single mode read | expand

Commit Message

Tony Lindgren Feb. 5, 2021, 1:45 p.m. UTC
When we set bit 10 high we use continuous mode and not single
mode. Let's correct this to avoid confusion. No functional
changes here, the code does the right thing with bit 10.

Cc: Adam Ford <aford173@gmail.com>
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 4 ++--
 drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

Comments

Pavel Machek Feb. 6, 2021, 8:50 a.m. UTC | #1
Hi!

> When we set bit 10 high we use continuous mode and not single
> mode. Let's correct this to avoid confusion. No functional
> changes here, the code does the right thing with bit 10.

Seems okay to me. 1/4:

Acked-by: Pavel Machek <pavel@ucw.cz>

Best regards,
							Pavel
diff mbox series

Patch

diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
--- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -24,7 +24,7 @@  omap4430_mpu_temp_sensor_registers = {
 	.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
 
 	.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
-	.mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK,
+	.mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
 
 	.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
 };
@@ -97,7 +97,7 @@  omap4460_mpu_temp_sensor_registers = {
 	.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
 
 	.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
-	.mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK,
+	.mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
 
 	.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
 	.counter_mask = OMAP4460_COUNTER_MASK,
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -40,7 +40,7 @@ 
 /* OMAP4430.TEMP_SENSOR bits */
 #define OMAP4430_BGAP_TEMPSOFF_MASK			BIT(12)
 #define OMAP4430_BGAP_TSHUT_MASK			BIT(11)
-#define OMAP4430_SINGLE_MODE_MASK			BIT(10)
+#define OMAP4430_CONTINUOUS_MODE_MASK			BIT(10)
 #define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK		BIT(9)
 #define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK		BIT(8)
 #define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
@@ -113,7 +113,7 @@ 
 #define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
 
 /* OMAP4460.BANDGAP_CTRL bits */
-#define OMAP4460_SINGLE_MODE_MASK			BIT(31)
+#define OMAP4460_CONTINUOUS_MODE_MASK			BIT(31)
 #define OMAP4460_MASK_HOT_MASK				BIT(1)
 #define OMAP4460_MASK_COLD_MASK				BIT(0)