diff mbox series

thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976

Message ID 20210225213119.116550-1-konrad.dybcio@somainline.org (mailing list archive)
State New
Delegated to: Daniel Lezcano
Headers show
Series thermal: qcom: tsens_v1: Enable sensor 3 on MSM8976 | expand

Commit Message

Konrad Dybcio Feb. 25, 2021, 9:31 p.m. UTC
The sensor *is* in fact used and does report temperature.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/thermal/qcom/tsens-v1.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Thara Gopinath March 17, 2021, 6:23 p.m. UTC | #1
On 2/25/21 4:31 PM, Konrad Dybcio wrote:
> The sensor *is* in fact used and does report temperature.

I can't find any info that says otherwise. So,

Acked-by: Thara Gopinath <thara.gopinath@linaro.org>

Warm Regards
Thara

> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
>   drivers/thermal/qcom/tsens-v1.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index 3c19a3800c6d..573e261ccca7 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = {
>   	.get_temp	= get_temp_tsens_valid,
>   };
>   
> -/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
> +/* Valid for both MSM8956 and MSM8976. */
>   struct tsens_plat_data data_8976 = {
>   	.num_sensors	= 11,
>   	.ops		= &ops_8976,
> -	.hw_ids		= (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
> +	.hw_ids		= (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
>   	.feat		= &tsens_v1_feat,
>   	.fields		= tsens_v1_regfields,
>   };
>
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 3c19a3800c6d..573e261ccca7 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -380,11 +380,11 @@  static const struct tsens_ops ops_8976 = {
 	.get_temp	= get_temp_tsens_valid,
 };
 
-/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
+/* Valid for both MSM8956 and MSM8976. */
 struct tsens_plat_data data_8976 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8976,
-	.hw_ids		= (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
+	.hw_ids		= (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };