diff mbox series

cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c

Message ID 20210312120817.12604-1-unixbhaskar@gmail.com (mailing list archive)
State New, archived
Delegated to: viresh kumar
Headers show
Series cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c | expand

Commit Message

Bhaskar Chowdhury March 12, 2021, 12:08 p.m. UTC
s/untile/until/
s/souce/source/
s/divier/divider/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
---
 drivers/cpufreq/s5pv210-cpufreq.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--
2.26.2

Comments

Krzysztof Kozlowski March 12, 2021, 2:01 p.m. UTC | #1
On 12/03/2021 13:08, Bhaskar Chowdhury wrote:
> 
> s/untile/until/
> s/souce/source/
> s/divier/divider/
> 
> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
> ---
>  drivers/cpufreq/s5pv210-cpufreq.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
> index bed496cf8d24..1cfea5339beb 100644
> --- a/drivers/cpufreq/s5pv210-cpufreq.c
> +++ b/drivers/cpufreq/s5pv210-cpufreq.c
> @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>  		/*
>  		 * 6. Turn on APLL
>  		 * 6-1. Set PMS values
> -		 * 6-2. Wait untile the PLL is locked
> +		 * 6-2. Wait until the PLL is locked
>  		 */
>  		if (index == L0)
>  			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
> @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>  		} while (!(reg & (0x1 << 29)));
> 
>  		/*
> -		 * 7. Change souce clock from SCLKMPLL(667Mhz)
> +		 * 7. Change source clock from SCLKMPLL(667Mhz)
>  		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
>  		 * (667/4=166)->(200/4=50)Mhz
>  		 */
> @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>  	}
> 
>  	/*
> -	 * L4 level need to change memory bus speed, hence onedram clock divier
> +	 * L4 level need to change memory bus speed, hence onedram clock divider

Also grammar fix: need/needs.

Best regards,
Krzysztof
Bhaskar Chowdhury March 12, 2021, 11:16 p.m. UTC | #2
On 15:01 Fri 12 Mar 2021, Krzysztof Kozlowski wrote:
>On 12/03/2021 13:08, Bhaskar Chowdhury wrote:
>>
>> s/untile/until/
>> s/souce/source/
>> s/divier/divider/
>>
>> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
>> ---
>>  drivers/cpufreq/s5pv210-cpufreq.c | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
>> index bed496cf8d24..1cfea5339beb 100644
>> --- a/drivers/cpufreq/s5pv210-cpufreq.c
>> +++ b/drivers/cpufreq/s5pv210-cpufreq.c
>> @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>>  		/*
>>  		 * 6. Turn on APLL
>>  		 * 6-1. Set PMS values
>> -		 * 6-2. Wait untile the PLL is locked
>> +		 * 6-2. Wait until the PLL is locked
>>  		 */
>>  		if (index == L0)
>>  			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
>> @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>>  		} while (!(reg & (0x1 << 29)));
>>
>>  		/*
>> -		 * 7. Change souce clock from SCLKMPLL(667Mhz)
>> +		 * 7. Change source clock from SCLKMPLL(667Mhz)
>>  		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
>>  		 * (667/4=166)->(200/4=50)Mhz
>>  		 */
>> @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
>>  	}
>>
>>  	/*
>> -	 * L4 level need to change memory bus speed, hence onedram clock divier
>> +	 * L4 level need to change memory bus speed, hence onedram clock divider
>
>Also grammar fix: need/needs.
>
Hmmm ...good catch...V2 on the way...

>Best regards,
>Krzysztof
Tom Saeger March 12, 2021, 11:38 p.m. UTC | #3
On Sat, Mar 13, 2021 at 04:46:20AM +0530, Bhaskar Chowdhury wrote:
> On 15:01 Fri 12 Mar 2021, Krzysztof Kozlowski wrote:
> > On 12/03/2021 13:08, Bhaskar Chowdhury wrote:
> > > 
> > > s/untile/until/
> > > s/souce/source/
> > > s/divier/divider/
> > > 
> > > Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
> > > ---
> > >  drivers/cpufreq/s5pv210-cpufreq.c | 6 +++---
> > >  1 file changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
> > > index bed496cf8d24..1cfea5339beb 100644
> > > --- a/drivers/cpufreq/s5pv210-cpufreq.c
> > > +++ b/drivers/cpufreq/s5pv210-cpufreq.c
> > > @@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> > >  		/*
> > >  		 * 6. Turn on APLL
> > >  		 * 6-1. Set PMS values
> > > -		 * 6-2. Wait untile the PLL is locked
> > > +		 * 6-2. Wait until the PLL is locked
> > >  		 */
> > >  		if (index == L0)
> > >  			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
> > > @@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> > >  		} while (!(reg & (0x1 << 29)));
> > > 
> > >  		/*
> > > -		 * 7. Change souce clock from SCLKMPLL(667Mhz)
> > > +		 * 7. Change source clock from SCLKMPLL(667Mhz)
> > >  		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
> > >  		 * (667/4=166)->(200/4=50)Mhz
> > >  		 */
> > > @@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> > >  	}
> > > 
> > >  	/*
> > > -	 * L4 level need to change memory bus speed, hence onedram clock divier
> > > +	 * L4 level need to change memory bus speed, hence onedram clock divider
> > 
> > Also grammar fix: need/needs.
> > 
> Hmmm ...good catch...V2 on the way...
> 
> > Best regards,
> > Krzysztof

May as well roll in few more?

Regards,

--Tom

diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index a186c0d8a290..6ecef301bd40 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock);
 /* Use 800MHz when entering sleep mode */
 #define SLEEP_FREQ     (800 * 1000)

-/* Tracks if cpu freqency can be updated anymore */
+/* Tracks if cpu frequency can be updated anymore */
 static bool no_cpufreq_access;

 /*
@@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = {

 /*
  * This function set DRAM refresh counter
- * accoriding to operating frequency of DRAM
+ * according to operating frequency of DRAM
  * ch: DMC port number 0 or 1
  * freq: Operating frequency of DRAM(KHz)
  */
@@ -320,7 +320,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)

                /*
                 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
-                * true refresh counter is already programed in upper
+                * true refresh counter is already programmed in upper
                 * code. 0x287@83Mhz
                 */
                if (!bus_speed_changing)
Randy Dunlap March 12, 2021, 11:52 p.m. UTC | #4
On 3/12/21 3:38 PM, Tom Saeger wrote:
> On Sat, Mar 13, 2021 at 04:46:20AM +0530, Bhaskar Chowdhury wrote:
>> On 15:01 Fri 12 Mar 2021, Krzysztof Kozlowski wrote:
>>> On 12/03/2021 13:08, Bhaskar Chowdhury wrote:
>>>>
>>>> s/untile/until/
>>>> s/souce/source/
>>>> s/divier/divider/
>>>>

> 
> May as well roll in few more?
> 
> Regards,
> 
> --Tom
> 
> diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
> index a186c0d8a290..6ecef301bd40 100644
> --- a/drivers/cpufreq/s5pv210-cpufreq.c
> +++ b/drivers/cpufreq/s5pv210-cpufreq.c
> @@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock);
>  /* Use 800MHz when entering sleep mode */
>  #define SLEEP_FREQ     (800 * 1000)
> 
> -/* Tracks if cpu freqency can be updated anymore */
> +/* Tracks if cpu frequency can be updated anymore */
>  static bool no_cpufreq_access;
> 
>  /*
> @@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = {
> 
>  /*
>   * This function set DRAM refresh counter
> - * accoriding to operating frequency of DRAM
> + * according to operating frequency of DRAM
>   * ch: DMC port number 0 or 1
>   * freq: Operating frequency of DRAM(KHz)
>   */
> @@ -320,7 +320,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
> 
>                 /*
>                  * 3. DMC1 refresh count for 133Mhz if (index == L4) is
> -                * true refresh counter is already programed in upper
> +                * true refresh counter is already programmed in upper
>                  * code. 0x287@83Mhz
>                  */
>                 if (!bus_speed_changing)
> 

LGTM.
Acked-by: Randy Dunlap <rdunlap@infradead.org>

Thanks.
diff mbox series

Patch

diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index bed496cf8d24..1cfea5339beb 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -378,7 +378,7 @@  static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		/*
 		 * 6. Turn on APLL
 		 * 6-1. Set PMS values
-		 * 6-2. Wait untile the PLL is locked
+		 * 6-2. Wait until the PLL is locked
 		 */
 		if (index == L0)
 			writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
@@ -390,7 +390,7 @@  static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 		} while (!(reg & (0x1 << 29)));

 		/*
-		 * 7. Change souce clock from SCLKMPLL(667Mhz)
+		 * 7. Change source clock from SCLKMPLL(667Mhz)
 		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
 		 * (667/4=166)->(200/4=50)Mhz
 		 */
@@ -439,7 +439,7 @@  static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 	}

 	/*
-	 * L4 level need to change memory bus speed, hence onedram clock divier
+	 * L4 level need to change memory bus speed, hence onedram clock divider
 	 * and memory refresh parameter should be changed
 	 */
 	if (bus_speed_changing) {