| Message ID | 20210317104918.12323-3-Qing-wu.Li@leica-geosystems.com.cn (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | power: bq27xxx: add bq78z100 | expand |
Hi, On Wed, Mar 17, 2021 at 10:49:18AM +0000, LI Qingwu wrote: > Add support for TI BQ78Z100, I2C interface gas gauge. > It provides a fully integrated safety protection > and authentication for 1 to 2-series cell Li-Ion and > Li-Polymer battery packs. > > The patch was tested with BQ78Z100 equipment. > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > > result of cat "/sys/class/power_supply/<bat_name>/uevent" > > CASE I: Discharging current>0: > POWER_SUPPLY_NAME=bq78z100-0 > POWER_SUPPLY_STATUS=Discharging > POWER_SUPPLY_PRESENT=1 > POWER_SUPPLY_VOLTAGE_NOW=3405000 > POWER_SUPPLY_CURRENT_NOW=4000 4mA @ 3.4V is 13.6 mW, which seems really small to me. Is this what you expect for your hardware? > POWER_SUPPLY_CAPACITY=28 > POWER_SUPPLY_CAPACITY_LEVEL=Normal > POWER_SUPPLY_TEMP=259 > POWER_SUPPLY_TIME_TO_EMPTY_NOW=1611000 I guess 18 days TTE is expected with such a small discharge rate. > POWER_SUPPLY_TECHNOLOGY=Li-ion > POWER_SUPPLY_CHARGE_FULL=6494000 > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > POWER_SUPPLY_CYCLE_COUNT=1 > POWER_SUPPLY_ENERGY_NOW=0 You are not feeding ENERGY_NOW with data, so do not expose it. > POWER_SUPPLY_POWER_AVG=65535 That's a signed int16 -1 and looks suspicious. Especially since expected power average is around 13.6 mW. Is something wrong with the handling of BQ27XXX_REG_AP for your chip? > POWER_SUPPLY_HEALTH=Good > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > CASE II : No discharging current: > POWER_SUPPLY_NAME=bq78z100-0 > POWER_SUPPLY_STATUS=Discharging That should actually be "Not Charging" for an idle battery. I suppose recent changes to bq27000, which I applied in the last few days to my for-next branch, might fix this. > POWER_SUPPLY_PRESENT=1 > POWER_SUPPLY_VOLTAGE_NOW=3405000 > POWER_SUPPLY_CURRENT_NOW=0 > POWER_SUPPLY_CAPACITY=28 > POWER_SUPPLY_CAPACITY_LEVEL=Normal > POWER_SUPPLY_TEMP=260 > POWER_SUPPLY_TECHNOLOGY=Li-ion > POWER_SUPPLY_CHARGE_FULL=6494000 > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > POWER_SUPPLY_CYCLE_COUNT=1 > POWER_SUPPLY_ENERGY_NOW=0 > POWER_SUPPLY_POWER_AVG=0 > POWER_SUPPLY_HEALTH=Good > POWER_SUPPLY_MANUFACTURER=Texas Instruments > --- You should expose POWER_SUPPLY_PROP_CHARGE_NOW for exposing BQ27XXX_REG_RC info, which is more precise than CAPACITY. Thanks, -- Sebastian > drivers/power/supply/bq27xxx_battery.c | 44 ++++++++++++++++++++++ > drivers/power/supply/bq27xxx_battery_i2c.c | 2 + > include/linux/power/bq27xxx_battery.h | 1 + > 3 files changed, 47 insertions(+) > > diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c > index 4c4a7b1c64c5..05a4f9190160 100644 > --- a/drivers/power/supply/bq27xxx_battery.c > +++ b/drivers/power/supply/bq27xxx_battery.c > @@ -39,6 +39,7 @@ > * https://www.ti.com/product/bq27z561 > * https://www.ti.com/product/bq28z610 > * https://www.ti.com/product/bq34z100-g1 > + * https://www.ti.com/product/bq78z100 > */ > > #include <linux/device.h> > @@ -515,6 +516,27 @@ static u8 > [BQ27XXX_REG_DCAP] = 0x3c, > [BQ27XXX_REG_AP] = 0x22, > BQ27XXX_DM_REG_ROWS, > + }, > + bq78z100_regs[BQ27XXX_REG_MAX] = { > + [BQ27XXX_REG_CTRL] = 0x00, > + [BQ27XXX_REG_TEMP] = 0x06, > + [BQ27XXX_REG_INT_TEMP] = 0x28, > + [BQ27XXX_REG_VOLT] = 0x08, > + [BQ27XXX_REG_AI] = 0x14, > + [BQ27XXX_REG_FLAGS] = 0x0a, > + [BQ27XXX_REG_TTE] = 0x16, > + [BQ27XXX_REG_TTF] = 0x18, > + [BQ27XXX_REG_TTES] = 0x1c, > + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, > + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR, > + [BQ27XXX_REG_RC] = 0x10, > + [BQ27XXX_REG_FCC] = 0x12, > + [BQ27XXX_REG_CYCT] = 0x2a, > + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, > + [BQ27XXX_REG_SOC] = 0x2c, > + [BQ27XXX_REG_DCAP] = 0x3c, > + [BQ27XXX_REG_AP] = 0x22, > + BQ27XXX_DM_REG_ROWS, > }; > > static enum power_supply_property bq27000_props[] = { > @@ -813,6 +835,26 @@ static enum power_supply_property bq34z100_props[] = { > POWER_SUPPLY_PROP_MANUFACTURER, > }; > > +static enum power_supply_property bq78z100_props[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_CAPACITY, > + POWER_SUPPLY_PROP_CAPACITY_LEVEL, > + POWER_SUPPLY_PROP_TEMP, > + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, > + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_CHARGE_FULL, > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, > + POWER_SUPPLY_PROP_CYCLE_COUNT, > + POWER_SUPPLY_PROP_ENERGY_NOW, > + POWER_SUPPLY_PROP_POWER_AVG, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_MANUFACTURER, > +}; > + > struct bq27xxx_dm_reg { > u8 subclass_id; > u8 offset; > @@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = { > #define bq27z561_dm_regs 0 > #define bq28z610_dm_regs 0 > #define bq34z100_dm_regs 0 > +#define bq78z100_dm_regs 0 > > #define BQ27XXX_O_ZERO BIT(0) > #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */ > @@ -969,6 +1012,7 @@ static struct { > [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS), > [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \ > BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM), > + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS), > }; > > static DEFINE_MUTEX(bq27xxx_list_lock); > diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c > index eb4f4284982f..46f078350fd3 100644 > --- a/drivers/power/supply/bq27xxx_battery_i2c.c > +++ b/drivers/power/supply/bq27xxx_battery_i2c.c > @@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = { > { "bq27z561", BQ27Z561 }, > { "bq28z610", BQ28Z610 }, > { "bq34z100", BQ34Z100 }, > + { "bq78z100", BQ78Z100 }, > {}, > }; > MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table); > @@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { > { .compatible = "ti,bq27z561" }, > { .compatible = "ti,bq28z610" }, > { .compatible = "ti,bq34z100" }, > + { .compatible = "ti,bq78z100" }, > {}, > }; > MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table); > diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h > index 111a40d0d3d5..ac17618043b1 100644 > --- a/include/linux/power/bq27xxx_battery.h > +++ b/include/linux/power/bq27xxx_battery.h > @@ -33,6 +33,7 @@ enum bq27xxx_chip { > BQ27Z561, > BQ28Z610, > BQ34Z100, > + BQ78Z100, > }; > > struct bq27xxx_device_info; > -- > 2.17.1 >
Hi Sebastian, About 4mA current, it's not the expected current, since we are working remotely, the instrument was unattended. With the real current, the battery will be empty in a working day, so we just connect a dummy load for test for a while, You mentioned the POWER_AVG looks suspicious, yes, it's due to I didn't pick the all the commits from master into my code, after pick it's looks correct. About " Discharging " for idle battery, I picked you change, and it is "Not Charging", yes fixed by you! One question, after I pick all the commits, the current goes to negative during discharging, is this correct? POWER_SUPPLY_NAME=bq78z100-0 POWER_SUPPLY_STATUS=Discharging POWER_SUPPLY_PRESENT=1 POWER_SUPPLY_VOLTAGE_NOW=3386000 POWER_SUPPLY_CURRENT_NOW=-5000 POWER_SUPPLY_CAPACITY=27 POWER_SUPPLY_CAPACITY_LEVEL=Normal POWER_SUPPLY_TEMP=269 POWER_SUPPLY_TIME_TO_EMPTY_NOW=1249920 POWER_SUPPLY_TECHNOLOGY=Li-ion POWER_SUPPLY_CHARGE_FULL=6494000 POWER_SUPPLY_CHARGE_NOW=1736000 POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 POWER_SUPPLY_CYCLE_COUNT=1 POWER_SUPPLY_POWER_AVG=-20000 POWER_SUPPLY_HEALTH=Good POWER_SUPPLY_MANUFACTURER=Texas Instruments Best Regards Li Qingwu (Terry) -----Original Message----- From: Sebastian Reichel <sre@kernel.org> Sent: Wednesday, March 17, 2021 9:32 PM To: LI Qingwu <qing-wu.li@leica-geosystems.com.cn> Cc: robh+dt@kernel.org; pali@kernel.org; krzk@kernel.org; linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; TERTYCHNYI Grygorii <grygorii.tertychnyi@leica-geosystems.com>; ZHIZHIKIN Andrey <andrey.zhizhikin@leica-geosystems.com> Subject: Re: [PATCH V6 2/2] power: supply: bq27xxx: Add support for BQ78Z100 Hi, On Wed, Mar 17, 2021 at 10:49:18AM +0000, LI Qingwu wrote: > Add support for TI BQ78Z100, I2C interface gas gauge. > It provides a fully integrated safety protection and authentication > for 1 to 2-series cell Li-Ion and Li-Polymer battery packs. > > The patch was tested with BQ78Z100 equipment. > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > > result of cat "/sys/class/power_supply/<bat_name>/uevent" > > CASE I: Discharging current>0: > POWER_SUPPLY_NAME=bq78z100-0 > POWER_SUPPLY_STATUS=Discharging > POWER_SUPPLY_PRESENT=1 > POWER_SUPPLY_VOLTAGE_NOW=3405000 > POWER_SUPPLY_CURRENT_NOW=4000 4mA @ 3.4V is 13.6 mW, which seems really small to me. Is this what you expect for your hardware? > POWER_SUPPLY_CAPACITY=28 > POWER_SUPPLY_CAPACITY_LEVEL=Normal > POWER_SUPPLY_TEMP=259 > POWER_SUPPLY_TIME_TO_EMPTY_NOW=1611000 I guess 18 days TTE is expected with such a small discharge rate. > POWER_SUPPLY_TECHNOLOGY=Li-ion > POWER_SUPPLY_CHARGE_FULL=6494000 > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > POWER_SUPPLY_CYCLE_COUNT=1 > POWER_SUPPLY_ENERGY_NOW=0 You are not feeding ENERGY_NOW with data, so do not expose it. > POWER_SUPPLY_POWER_AVG=65535 That's a signed int16 -1 and looks suspicious. Especially since expected power average is around 13.6 mW. Is something wrong with the handling of BQ27XXX_REG_AP for your chip? > POWER_SUPPLY_HEALTH=Good > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > CASE II : No discharging current: > POWER_SUPPLY_NAME=bq78z100-0 > POWER_SUPPLY_STATUS=Discharging That should actually be "Not Charging" for an idle battery. I suppose recent changes to bq27000, which I applied in the last few days to my for-next branch, might fix this. > POWER_SUPPLY_PRESENT=1 > POWER_SUPPLY_VOLTAGE_NOW=3405000 > POWER_SUPPLY_CURRENT_NOW=0 > POWER_SUPPLY_CAPACITY=28 > POWER_SUPPLY_CAPACITY_LEVEL=Normal > POWER_SUPPLY_TEMP=260 > POWER_SUPPLY_TECHNOLOGY=Li-ion > POWER_SUPPLY_CHARGE_FULL=6494000 > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > POWER_SUPPLY_CYCLE_COUNT=1 > POWER_SUPPLY_ENERGY_NOW=0 > POWER_SUPPLY_POWER_AVG=0 > POWER_SUPPLY_HEALTH=Good > POWER_SUPPLY_MANUFACTURER=Texas Instruments > --- You should expose POWER_SUPPLY_PROP_CHARGE_NOW for exposing BQ27XXX_REG_RC info, which is more precise than CAPACITY. Thanks, -- Sebastian > drivers/power/supply/bq27xxx_battery.c | 44 ++++++++++++++++++++++ > drivers/power/supply/bq27xxx_battery_i2c.c | 2 + > include/linux/power/bq27xxx_battery.h | 1 + > 3 files changed, 47 insertions(+) > > diff --git a/drivers/power/supply/bq27xxx_battery.c > b/drivers/power/supply/bq27xxx_battery.c > index 4c4a7b1c64c5..05a4f9190160 100644 > --- a/drivers/power/supply/bq27xxx_battery.c > +++ b/drivers/power/supply/bq27xxx_battery.c > @@ -39,6 +39,7 @@ > * https://www.ti.com/product/bq27z561 > * https://www.ti.com/product/bq28z610 > * https://www.ti.com/product/bq34z100-g1 > + * https://www.ti.com/product/bq78z100 > */ > > #include <linux/device.h> > @@ -515,6 +516,27 @@ static u8 > [BQ27XXX_REG_DCAP] = 0x3c, > [BQ27XXX_REG_AP] = 0x22, > BQ27XXX_DM_REG_ROWS, > + }, > + bq78z100_regs[BQ27XXX_REG_MAX] = { > + [BQ27XXX_REG_CTRL] = 0x00, > + [BQ27XXX_REG_TEMP] = 0x06, > + [BQ27XXX_REG_INT_TEMP] = 0x28, > + [BQ27XXX_REG_VOLT] = 0x08, > + [BQ27XXX_REG_AI] = 0x14, > + [BQ27XXX_REG_FLAGS] = 0x0a, > + [BQ27XXX_REG_TTE] = 0x16, > + [BQ27XXX_REG_TTF] = 0x18, > + [BQ27XXX_REG_TTES] = 0x1c, > + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, > + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR, > + [BQ27XXX_REG_RC] = 0x10, > + [BQ27XXX_REG_FCC] = 0x12, > + [BQ27XXX_REG_CYCT] = 0x2a, > + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, > + [BQ27XXX_REG_SOC] = 0x2c, > + [BQ27XXX_REG_DCAP] = 0x3c, > + [BQ27XXX_REG_AP] = 0x22, > + BQ27XXX_DM_REG_ROWS, > }; > > static enum power_supply_property bq27000_props[] = { @@ -813,6 > +835,26 @@ static enum power_supply_property bq34z100_props[] = { > POWER_SUPPLY_PROP_MANUFACTURER, > }; > > +static enum power_supply_property bq78z100_props[] = { > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_CAPACITY, > + POWER_SUPPLY_PROP_CAPACITY_LEVEL, > + POWER_SUPPLY_PROP_TEMP, > + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, > + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, > + POWER_SUPPLY_PROP_TECHNOLOGY, > + POWER_SUPPLY_PROP_CHARGE_FULL, > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, > + POWER_SUPPLY_PROP_CYCLE_COUNT, > + POWER_SUPPLY_PROP_ENERGY_NOW, > + POWER_SUPPLY_PROP_POWER_AVG, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_MANUFACTURER, > +}; > + > struct bq27xxx_dm_reg { > u8 subclass_id; > u8 offset; > @@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = { > #define bq27z561_dm_regs 0 #define bq28z610_dm_regs 0 #define > bq34z100_dm_regs 0 > +#define bq78z100_dm_regs 0 > > #define BQ27XXX_O_ZERO BIT(0) > #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */ > @@ -969,6 +1012,7 @@ static struct { > [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS), > [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \ > BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM), > + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS), > }; > > static DEFINE_MUTEX(bq27xxx_list_lock); diff --git > a/drivers/power/supply/bq27xxx_battery_i2c.c > b/drivers/power/supply/bq27xxx_battery_i2c.c > index eb4f4284982f..46f078350fd3 100644 > --- a/drivers/power/supply/bq27xxx_battery_i2c.c > +++ b/drivers/power/supply/bq27xxx_battery_i2c.c > @@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = { > { "bq27z561", BQ27Z561 }, > { "bq28z610", BQ28Z610 }, > { "bq34z100", BQ34Z100 }, > + { "bq78z100", BQ78Z100 }, > {}, > }; > MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table); @@ -284,6 +285,7 @@ > static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { > { .compatible = "ti,bq27z561" }, > { .compatible = "ti,bq28z610" }, > { .compatible = "ti,bq34z100" }, > + { .compatible = "ti,bq78z100" }, > {}, > }; > MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table); > diff --git a/include/linux/power/bq27xxx_battery.h > b/include/linux/power/bq27xxx_battery.h > index 111a40d0d3d5..ac17618043b1 100644 > --- a/include/linux/power/bq27xxx_battery.h > +++ b/include/linux/power/bq27xxx_battery.h > @@ -33,6 +33,7 @@ enum bq27xxx_chip { > BQ27Z561, > BQ28Z610, > BQ34Z100, > + BQ78Z100, > }; > > struct bq27xxx_device_info; > -- > 2.17.1 >
Hi, On Fri, Mar 19, 2021 at 10:16:51AM +0000, LI Qingwu wrote: > About 4mA current, it's not the expected current, since we are > working remotely, the instrument was unattended. With the real > current, the battery will be empty in a working day, so we just > connect a dummy load for test for a while, IIUIC 4-5 mA is the expected current for your dummy load and the test data looks ok? > You mentioned the POWER_AVG looks suspicious, yes, it's due to I > didn't pick the all the commits from master into my code, after > pick it's looks correct. Ok. > About " Discharging " for idle battery, I picked you change, and > it is "Not Charging", yes fixed by you! Great. > One question, after I pick all the commits, the current goes to > negative during discharging, is this correct? Yes, as documented in 05f94eb98907 ("power: supply: document current direction") the current should be negative when battery discharges and positive when it charges. > POWER_SUPPLY_NAME=bq78z100-0 > POWER_SUPPLY_STATUS=Discharging > POWER_SUPPLY_PRESENT=1 > POWER_SUPPLY_VOLTAGE_NOW=3386000 > POWER_SUPPLY_CURRENT_NOW=-5000 > POWER_SUPPLY_CAPACITY=27 > POWER_SUPPLY_CAPACITY_LEVEL=Normal > POWER_SUPPLY_TEMP=269 > POWER_SUPPLY_TIME_TO_EMPTY_NOW=1249920 > POWER_SUPPLY_TECHNOLOGY=Li-ion > POWER_SUPPLY_CHARGE_FULL=6494000 > POWER_SUPPLY_CHARGE_NOW=1736000 > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > POWER_SUPPLY_CYCLE_COUNT=1 > POWER_SUPPLY_POWER_AVG=-20000 > POWER_SUPPLY_HEALTH=Good > POWER_SUPPLY_MANUFACTURER=Texas Instruments That data looks consistent to me now. Last but not least: Please don't top-post in kernel mailing lists and use inline style instead, as stated in Documentation/process/howto.rst: > Remember to keep the context and the attribution of your replies intact, > keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and > add your statements between the individual quoted sections instead of > writing at the top of the mail. Thanks, -- Sebastian > -----Original Message----- > Hi, > > On Wed, Mar 17, 2021 at 10:49:18AM +0000, LI Qingwu wrote: > > Add support for TI BQ78Z100, I2C interface gas gauge. > > It provides a fully integrated safety protection and authentication > > for 1 to 2-series cell Li-Ion and Li-Polymer battery packs. > > > > The patch was tested with BQ78Z100 equipment. > > > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > > > > result of cat "/sys/class/power_supply/<bat_name>/uevent" > > > > CASE I: Discharging current>0: > > POWER_SUPPLY_NAME=bq78z100-0 > > POWER_SUPPLY_STATUS=Discharging > > POWER_SUPPLY_PRESENT=1 > > POWER_SUPPLY_VOLTAGE_NOW=3405000 > > POWER_SUPPLY_CURRENT_NOW=4000 > > 4mA @ 3.4V is 13.6 mW, which seems really small to me. > Is this what you expect for your hardware? > > > POWER_SUPPLY_CAPACITY=28 > > POWER_SUPPLY_CAPACITY_LEVEL=Normal > > POWER_SUPPLY_TEMP=259 > > POWER_SUPPLY_TIME_TO_EMPTY_NOW=1611000 > > I guess 18 days TTE is expected with such a small discharge rate. > > > POWER_SUPPLY_TECHNOLOGY=Li-ion > > POWER_SUPPLY_CHARGE_FULL=6494000 > > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > > POWER_SUPPLY_CYCLE_COUNT=1 > > POWER_SUPPLY_ENERGY_NOW=0 > > You are not feeding ENERGY_NOW with data, so do not expose it. > > > POWER_SUPPLY_POWER_AVG=65535 > > That's a signed int16 -1 and looks suspicious. Especially since expected power average is around 13.6 mW. Is something wrong with the handling of BQ27XXX_REG_AP for your chip? > > > POWER_SUPPLY_HEALTH=Good > > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > > > CASE II : No discharging current: > > POWER_SUPPLY_NAME=bq78z100-0 > > POWER_SUPPLY_STATUS=Discharging > > That should actually be "Not Charging" for an idle battery. I suppose recent changes to bq27000, which I applied in the last few days to my for-next branch, might fix this. > > > POWER_SUPPLY_PRESENT=1 > > POWER_SUPPLY_VOLTAGE_NOW=3405000 > > POWER_SUPPLY_CURRENT_NOW=0 > > POWER_SUPPLY_CAPACITY=28 > > POWER_SUPPLY_CAPACITY_LEVEL=Normal > > POWER_SUPPLY_TEMP=260 > > POWER_SUPPLY_TECHNOLOGY=Li-ion > > POWER_SUPPLY_CHARGE_FULL=6494000 > > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > > POWER_SUPPLY_CYCLE_COUNT=1 > > POWER_SUPPLY_ENERGY_NOW=0 > > POWER_SUPPLY_POWER_AVG=0 > > POWER_SUPPLY_HEALTH=Good > > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > --- > > You should expose POWER_SUPPLY_PROP_CHARGE_NOW for exposing BQ27XXX_REG_RC info, which is more precise than CAPACITY. > > Thanks, > > -- Sebastian > > > drivers/power/supply/bq27xxx_battery.c | 44 ++++++++++++++++++++++ > > drivers/power/supply/bq27xxx_battery_i2c.c | 2 + > > include/linux/power/bq27xxx_battery.h | 1 + > > 3 files changed, 47 insertions(+) > > > > diff --git a/drivers/power/supply/bq27xxx_battery.c > > b/drivers/power/supply/bq27xxx_battery.c > > index 4c4a7b1c64c5..05a4f9190160 100644 > > --- a/drivers/power/supply/bq27xxx_battery.c > > +++ b/drivers/power/supply/bq27xxx_battery.c > > @@ -39,6 +39,7 @@ > > * https://www.ti.com/product/bq27z561 > > * https://www.ti.com/product/bq28z610 > > * https://www.ti.com/product/bq34z100-g1 > > + * https://www.ti.com/product/bq78z100 > > */ > > > > #include <linux/device.h> > > @@ -515,6 +516,27 @@ static u8 > > [BQ27XXX_REG_DCAP] = 0x3c, > > [BQ27XXX_REG_AP] = 0x22, > > BQ27XXX_DM_REG_ROWS, > > + }, > > + bq78z100_regs[BQ27XXX_REG_MAX] = { > > + [BQ27XXX_REG_CTRL] = 0x00, > > + [BQ27XXX_REG_TEMP] = 0x06, > > + [BQ27XXX_REG_INT_TEMP] = 0x28, > > + [BQ27XXX_REG_VOLT] = 0x08, > > + [BQ27XXX_REG_AI] = 0x14, > > + [BQ27XXX_REG_FLAGS] = 0x0a, > > + [BQ27XXX_REG_TTE] = 0x16, > > + [BQ27XXX_REG_TTF] = 0x18, > > + [BQ27XXX_REG_TTES] = 0x1c, > > + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, > > + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR, > > + [BQ27XXX_REG_RC] = 0x10, > > + [BQ27XXX_REG_FCC] = 0x12, > > + [BQ27XXX_REG_CYCT] = 0x2a, > > + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, > > + [BQ27XXX_REG_SOC] = 0x2c, > > + [BQ27XXX_REG_DCAP] = 0x3c, > > + [BQ27XXX_REG_AP] = 0x22, > > + BQ27XXX_DM_REG_ROWS, > > }; > > > > static enum power_supply_property bq27000_props[] = { @@ -813,6 > > +835,26 @@ static enum power_supply_property bq34z100_props[] = { > > POWER_SUPPLY_PROP_MANUFACTURER, > > }; > > > > +static enum power_supply_property bq78z100_props[] = { > > + POWER_SUPPLY_PROP_STATUS, > > + POWER_SUPPLY_PROP_PRESENT, > > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > > + POWER_SUPPLY_PROP_CURRENT_NOW, > > + POWER_SUPPLY_PROP_CAPACITY, > > + POWER_SUPPLY_PROP_CAPACITY_LEVEL, > > + POWER_SUPPLY_PROP_TEMP, > > + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, > > + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, > > + POWER_SUPPLY_PROP_TECHNOLOGY, > > + POWER_SUPPLY_PROP_CHARGE_FULL, > > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, > > + POWER_SUPPLY_PROP_CYCLE_COUNT, > > + POWER_SUPPLY_PROP_ENERGY_NOW, > > + POWER_SUPPLY_PROP_POWER_AVG, > > + POWER_SUPPLY_PROP_HEALTH, > > + POWER_SUPPLY_PROP_MANUFACTURER, > > +}; > > + > > struct bq27xxx_dm_reg { > > u8 subclass_id; > > u8 offset; > > @@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = { > > #define bq27z561_dm_regs 0 #define bq28z610_dm_regs 0 #define > > bq34z100_dm_regs 0 > > +#define bq78z100_dm_regs 0 > > > > #define BQ27XXX_O_ZERO BIT(0) > > #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */ > > @@ -969,6 +1012,7 @@ static struct { > > [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS), > > [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \ > > BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM), > > + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS), > > }; > > > > static DEFINE_MUTEX(bq27xxx_list_lock); diff --git > > a/drivers/power/supply/bq27xxx_battery_i2c.c > > b/drivers/power/supply/bq27xxx_battery_i2c.c > > index eb4f4284982f..46f078350fd3 100644 > > --- a/drivers/power/supply/bq27xxx_battery_i2c.c > > +++ b/drivers/power/supply/bq27xxx_battery_i2c.c > > @@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = { > > { "bq27z561", BQ27Z561 }, > > { "bq28z610", BQ28Z610 }, > > { "bq34z100", BQ34Z100 }, > > + { "bq78z100", BQ78Z100 }, > > {}, > > }; > > MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table); @@ -284,6 +285,7 @@ > > static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { > > { .compatible = "ti,bq27z561" }, > > { .compatible = "ti,bq28z610" }, > > { .compatible = "ti,bq34z100" }, > > + { .compatible = "ti,bq78z100" }, > > {}, > > }; > > MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table); > > diff --git a/include/linux/power/bq27xxx_battery.h > > b/include/linux/power/bq27xxx_battery.h > > index 111a40d0d3d5..ac17618043b1 100644 > > --- a/include/linux/power/bq27xxx_battery.h > > +++ b/include/linux/power/bq27xxx_battery.h > > @@ -33,6 +33,7 @@ enum bq27xxx_chip { > > BQ27Z561, > > BQ28Z610, > > BQ34Z100, > > + BQ78Z100, > > }; > > > > struct bq27xxx_device_info; > > -- > > 2.17.1 > >
Hi Sebastian, On Friday, March 19, 2021 7:27 PM Sebastian Reichel wrote: > Hi, > > On Fri, Mar 19, 2021 at 10:16:51AM +0000, LI Qingwu wrote: > > About 4mA current, it's not the expected current, since we are working > > remotely, the instrument was unattended. With the real current, the > > battery will be empty in a working day, so we just connect a dummy > > load for test for a while, > > IIUIC 4-5 mA is the expected current for your dummy load and the test data > looks ok? Yes, the data is correct, we tested several different current and data are correct, confirmed by our electronics engineer. > > > You mentioned the POWER_AVG looks suspicious, yes, it's due to I > > didn't pick the all the commits from master into my code, after pick > > it's looks correct. > > Ok. > > > About " Discharging " for idle battery, I picked you change, and it is > > "Not Charging", yes fixed by you! > > Great. > > > One question, after I pick all the commits, the current goes to > > negative during discharging, is this correct? > > Yes, as documented in 05f94eb98907 ("power: supply: document current > direction") the current should be negative when battery discharges and positive > when it charges. Thanks! > > > POWER_SUPPLY_NAME=bq78z100-0 > > POWER_SUPPLY_STATUS=Discharging > > POWER_SUPPLY_PRESENT=1 > > POWER_SUPPLY_VOLTAGE_NOW=3386000 > > POWER_SUPPLY_CURRENT_NOW=-5000 > > POWER_SUPPLY_CAPACITY=27 > > POWER_SUPPLY_CAPACITY_LEVEL=Normal > > POWER_SUPPLY_TEMP=269 > > POWER_SUPPLY_TIME_TO_EMPTY_NOW=1249920 > > POWER_SUPPLY_TECHNOLOGY=Li-ion > > POWER_SUPPLY_CHARGE_FULL=6494000 > > POWER_SUPPLY_CHARGE_NOW=1736000 > > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > > POWER_SUPPLY_CYCLE_COUNT=1 > > POWER_SUPPLY_POWER_AVG=-20000 > > POWER_SUPPLY_HEALTH=Good > > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > That data looks consistent to me now. > > Last but not least: Please don't top-post in kernel mailing lists and use inline style > instead, as stated in > Documentation/process/howto.rst: Noted down, I will follow the documents, thanks. > > Remember to keep the context and the attribution of your replies > > intact, keep the "John Kernelhacker wrote ...:" lines at the top of > > your reply, and add your statements between the individual quoted > > sections instead of writing at the top of the mail. > > Thanks, > > -- Sebastian > > > -----Original Message----- > > Hi, > > > > On Wed, Mar 17, 2021 at 10:49:18AM +0000, LI Qingwu wrote: > > > Add support for TI BQ78Z100, I2C interface gas gauge. > > > It provides a fully integrated safety protection and authentication > > > for 1 to 2-series cell Li-Ion and Li-Polymer battery packs. > > > > > > The patch was tested with BQ78Z100 equipment. > > > > > > Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> > > > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> > > > > > > result of cat "/sys/class/power_supply/<bat_name>/uevent" > > > > > > CASE I: Discharging current>0: > > > POWER_SUPPLY_NAME=bq78z100-0 > > > POWER_SUPPLY_STATUS=Discharging > > > POWER_SUPPLY_PRESENT=1 > > > POWER_SUPPLY_VOLTAGE_NOW=3405000 > > > POWER_SUPPLY_CURRENT_NOW=4000 > > > > 4mA @ 3.4V is 13.6 mW, which seems really small to me. > > Is this what you expect for your hardware? > > > > > POWER_SUPPLY_CAPACITY=28 > > > POWER_SUPPLY_CAPACITY_LEVEL=Normal > > > POWER_SUPPLY_TEMP=259 > > > POWER_SUPPLY_TIME_TO_EMPTY_NOW=1611000 > > > > I guess 18 days TTE is expected with such a small discharge rate. > > > > > POWER_SUPPLY_TECHNOLOGY=Li-ion > > > POWER_SUPPLY_CHARGE_FULL=6494000 > > > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > > > POWER_SUPPLY_CYCLE_COUNT=1 > > > POWER_SUPPLY_ENERGY_NOW=0 > > > > You are not feeding ENERGY_NOW with data, so do not expose it. > > > > > POWER_SUPPLY_POWER_AVG=65535 > > > > That's a signed int16 -1 and looks suspicious. Especially since expected power > average is around 13.6 mW. Is something wrong with the handling of > BQ27XXX_REG_AP for your chip? > > > > > POWER_SUPPLY_HEALTH=Good > > > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > > > > > CASE II : No discharging current: > > > POWER_SUPPLY_NAME=bq78z100-0 > > > POWER_SUPPLY_STATUS=Discharging > > > > That should actually be "Not Charging" for an idle battery. I suppose recent > changes to bq27000, which I applied in the last few days to my for-next branch, > might fix this. > > > > > POWER_SUPPLY_PRESENT=1 > > > POWER_SUPPLY_VOLTAGE_NOW=3405000 > > > POWER_SUPPLY_CURRENT_NOW=0 > > > POWER_SUPPLY_CAPACITY=28 > > > POWER_SUPPLY_CAPACITY_LEVEL=Normal > > > POWER_SUPPLY_TEMP=260 > > > POWER_SUPPLY_TECHNOLOGY=Li-ion > > > POWER_SUPPLY_CHARGE_FULL=6494000 > > > POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000 > > > POWER_SUPPLY_CYCLE_COUNT=1 > > > POWER_SUPPLY_ENERGY_NOW=0 > > > POWER_SUPPLY_POWER_AVG=0 > > > POWER_SUPPLY_HEALTH=Good > > > POWER_SUPPLY_MANUFACTURER=Texas Instruments > > > --- > > > > You should expose POWER_SUPPLY_PROP_CHARGE_NOW for exposing > BQ27XXX_REG_RC info, which is more precise than CAPACITY. > > > > Thanks, > > > > -- Sebastian > > > > > drivers/power/supply/bq27xxx_battery.c | 44 > ++++++++++++++++++++++ > > > drivers/power/supply/bq27xxx_battery_i2c.c | 2 + > > > include/linux/power/bq27xxx_battery.h | 1 + > > > 3 files changed, 47 insertions(+) > > > > > > diff --git a/drivers/power/supply/bq27xxx_battery.c > > > b/drivers/power/supply/bq27xxx_battery.c > > > index 4c4a7b1c64c5..05a4f9190160 100644 > > > --- a/drivers/power/supply/bq27xxx_battery.c > > > +++ b/drivers/power/supply/bq27xxx_battery.c > > > @@ -39,6 +39,7 @@ > > > * https://www.ti.com/product/bq27z561 > > > * https://www.ti.com/product/bq28z610 > > > * https://www.ti.com/product/bq34z100-g1 > > > + * https://www.ti.com/product/bq78z100 > > > */ > > > > > > #include <linux/device.h> > > > @@ -515,6 +516,27 @@ static u8 > > > [BQ27XXX_REG_DCAP] = 0x3c, > > > [BQ27XXX_REG_AP] = 0x22, > > > BQ27XXX_DM_REG_ROWS, > > > + }, > > > + bq78z100_regs[BQ27XXX_REG_MAX] = { > > > + [BQ27XXX_REG_CTRL] = 0x00, > > > + [BQ27XXX_REG_TEMP] = 0x06, > > > + [BQ27XXX_REG_INT_TEMP] = 0x28, > > > + [BQ27XXX_REG_VOLT] = 0x08, > > > + [BQ27XXX_REG_AI] = 0x14, > > > + [BQ27XXX_REG_FLAGS] = 0x0a, > > > + [BQ27XXX_REG_TTE] = 0x16, > > > + [BQ27XXX_REG_TTF] = 0x18, > > > + [BQ27XXX_REG_TTES] = 0x1c, > > > + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, > > > + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR, > > > + [BQ27XXX_REG_RC] = 0x10, > > > + [BQ27XXX_REG_FCC] = 0x12, > > > + [BQ27XXX_REG_CYCT] = 0x2a, > > > + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, > > > + [BQ27XXX_REG_SOC] = 0x2c, > > > + [BQ27XXX_REG_DCAP] = 0x3c, > > > + [BQ27XXX_REG_AP] = 0x22, > > > + BQ27XXX_DM_REG_ROWS, > > > }; > > > > > > static enum power_supply_property bq27000_props[] = { @@ -813,6 > > > +835,26 @@ static enum power_supply_property bq34z100_props[] = { > > > POWER_SUPPLY_PROP_MANUFACTURER, > > > }; > > > > > > +static enum power_supply_property bq78z100_props[] = { > > > + POWER_SUPPLY_PROP_STATUS, > > > + POWER_SUPPLY_PROP_PRESENT, > > > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > > > + POWER_SUPPLY_PROP_CURRENT_NOW, > > > + POWER_SUPPLY_PROP_CAPACITY, > > > + POWER_SUPPLY_PROP_CAPACITY_LEVEL, > > > + POWER_SUPPLY_PROP_TEMP, > > > + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, > > > + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, > > > + POWER_SUPPLY_PROP_TECHNOLOGY, > > > + POWER_SUPPLY_PROP_CHARGE_FULL, > > > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, > > > + POWER_SUPPLY_PROP_CYCLE_COUNT, > > > + POWER_SUPPLY_PROP_ENERGY_NOW, > > > + POWER_SUPPLY_PROP_POWER_AVG, > > > + POWER_SUPPLY_PROP_HEALTH, > > > + POWER_SUPPLY_PROP_MANUFACTURER, > > > +}; > > > + > > > struct bq27xxx_dm_reg { > > > u8 subclass_id; > > > u8 offset; > > > @@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] > = > > > { #define bq27z561_dm_regs 0 #define bq28z610_dm_regs 0 #define > > > bq34z100_dm_regs 0 > > > +#define bq78z100_dm_regs 0 > > > > > > #define BQ27XXX_O_ZERO BIT(0) > > > #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD > overtemperature flags */ > > > @@ -969,6 +1012,7 @@ static struct { > > > [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , > BQ27Z561_O_BITS), > > > [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , > BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \ > > > BQ27XXX_O_HAS_CI | > BQ27XXX_O_MUL_CHEM), > > > + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, > > > +BQ27Z561_O_BITS), > > > }; > > > > > > static DEFINE_MUTEX(bq27xxx_list_lock); diff --git > > > a/drivers/power/supply/bq27xxx_battery_i2c.c > > > b/drivers/power/supply/bq27xxx_battery_i2c.c > > > index eb4f4284982f..46f078350fd3 100644 > > > --- a/drivers/power/supply/bq27xxx_battery_i2c.c > > > +++ b/drivers/power/supply/bq27xxx_battery_i2c.c > > > @@ -248,6 +248,7 @@ static const struct i2c_device_id > bq27xxx_i2c_id_table[] = { > > > { "bq27z561", BQ27Z561 }, > > > { "bq28z610", BQ28Z610 }, > > > { "bq34z100", BQ34Z100 }, > > > + { "bq78z100", BQ78Z100 }, > > > {}, > > > }; > > > MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table); @@ -284,6 +285,7 > @@ > > > static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { > > > { .compatible = "ti,bq27z561" }, > > > { .compatible = "ti,bq28z610" }, > > > { .compatible = "ti,bq34z100" }, > > > + { .compatible = "ti,bq78z100" }, > > > {}, > > > }; > > > MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table); > > > diff --git a/include/linux/power/bq27xxx_battery.h > > > b/include/linux/power/bq27xxx_battery.h > > > index 111a40d0d3d5..ac17618043b1 100644 > > > --- a/include/linux/power/bq27xxx_battery.h > > > +++ b/include/linux/power/bq27xxx_battery.h > > > @@ -33,6 +33,7 @@ enum bq27xxx_chip { > > > BQ27Z561, > > > BQ28Z610, > > > BQ34Z100, > > > + BQ78Z100, > > > }; > > > > > > struct bq27xxx_device_info; > > > -- > > > 2.17.1 > > >
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c index 4c4a7b1c64c5..05a4f9190160 100644 --- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -39,6 +39,7 @@ * https://www.ti.com/product/bq27z561 * https://www.ti.com/product/bq28z610 * https://www.ti.com/product/bq34z100-g1 + * https://www.ti.com/product/bq78z100 */ #include <linux/device.h> @@ -515,6 +516,27 @@ static u8 [BQ27XXX_REG_DCAP] = 0x3c, [BQ27XXX_REG_AP] = 0x22, BQ27XXX_DM_REG_ROWS, + }, + bq78z100_regs[BQ27XXX_REG_MAX] = { + [BQ27XXX_REG_CTRL] = 0x00, + [BQ27XXX_REG_TEMP] = 0x06, + [BQ27XXX_REG_INT_TEMP] = 0x28, + [BQ27XXX_REG_VOLT] = 0x08, + [BQ27XXX_REG_AI] = 0x14, + [BQ27XXX_REG_FLAGS] = 0x0a, + [BQ27XXX_REG_TTE] = 0x16, + [BQ27XXX_REG_TTF] = 0x18, + [BQ27XXX_REG_TTES] = 0x1c, + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR, + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR, + [BQ27XXX_REG_RC] = 0x10, + [BQ27XXX_REG_FCC] = 0x12, + [BQ27XXX_REG_CYCT] = 0x2a, + [BQ27XXX_REG_AE] = INVALID_REG_ADDR, + [BQ27XXX_REG_SOC] = 0x2c, + [BQ27XXX_REG_DCAP] = 0x3c, + [BQ27XXX_REG_AP] = 0x22, + BQ27XXX_DM_REG_ROWS, }; static enum power_supply_property bq27000_props[] = { @@ -813,6 +835,26 @@ static enum power_supply_property bq34z100_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; +static enum power_supply_property bq78z100_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_POWER_AVG, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_MANUFACTURER, +}; + struct bq27xxx_dm_reg { u8 subclass_id; u8 offset; @@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = { #define bq27z561_dm_regs 0 #define bq28z610_dm_regs 0 #define bq34z100_dm_regs 0 +#define bq78z100_dm_regs 0 #define BQ27XXX_O_ZERO BIT(0) #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */ @@ -969,6 +1012,7 @@ static struct { [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS), [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \ BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM), + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS), }; static DEFINE_MUTEX(bq27xxx_list_lock); diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c index eb4f4284982f..46f078350fd3 100644 --- a/drivers/power/supply/bq27xxx_battery_i2c.c +++ b/drivers/power/supply/bq27xxx_battery_i2c.c @@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = { { "bq27z561", BQ27Z561 }, { "bq28z610", BQ28Z610 }, { "bq34z100", BQ34Z100 }, + { "bq78z100", BQ78Z100 }, {}, }; MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table); @@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = { { .compatible = "ti,bq27z561" }, { .compatible = "ti,bq28z610" }, { .compatible = "ti,bq34z100" }, + { .compatible = "ti,bq78z100" }, {}, }; MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table); diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h index 111a40d0d3d5..ac17618043b1 100644 --- a/include/linux/power/bq27xxx_battery.h +++ b/include/linux/power/bq27xxx_battery.h @@ -33,6 +33,7 @@ enum bq27xxx_chip { BQ27Z561, BQ28Z610, BQ34Z100, + BQ78Z100, }; struct bq27xxx_device_info;