diff mbox series

[v11,6/9] drivers: thermal: tsens: Replace custom 8960 apis with generic apis

Message ID 20210319005228.1250-7-ansuelsmth@gmail.com (mailing list archive)
State Superseded, archived
Delegated to: Daniel Lezcano
Headers show
Series Add support for ipq8064 tsens | expand

Commit Message

Christian Marangi March 19, 2021, 12:52 a.m. UTC 
Rework calibrate function to use common function. Derive the offset from
a missing hardcoded slope table and the data from the nvmem calib
efuses.
Drop custom get_temp function and use generic api.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
 1 file changed, 15 insertions(+), 41 deletions(-)

Comments

Thara Gopinath March 19, 2021, 1:12 p.m. UTC | #1 
On 3/18/21 8:52 PM, Ansuel Smith wrote:
> Rework calibrate function to use common function. Derive the offset from
> a missing hardcoded slope table and the data from the nvmem calib
> efuses.
> Drop custom get_temp function and use generic api.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
>   drivers/thermal/qcom/tsens-8960.c | 56 +++++++++----------------------
>   1 file changed, 15 insertions(+), 41 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index bdc64d4188bf..8c523b764862 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -67,6 +67,13 @@
>   #define S9_STATUS_OFF		0x3674
>   #define S10_STATUS_OFF		0x3678
>   
> +/* Original slope - 200 to compensate mC to C inaccuracy */
> +u32 tsens_msm8960_slope[] = {
> +			976, 976, 954, 976,
> +			911, 932, 932, 999,
> +			932, 999, 932
> +			};

make -C1 throws a warning for this. You have to make the table static. 
You can keep my Acked-by once it is fixed.

Warm Regards
Thara
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index bdc64d4188bf..8c523b764862 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -67,6 +67,13 @@ 
 #define S9_STATUS_OFF		0x3674
 #define S10_STATUS_OFF		0x3678
 
+/* Original slope - 200 to compensate mC to C inaccuracy */
+u32 tsens_msm8960_slope[] = {
+			976, 976, 954, 976,
+			911, 932, 932, 999,
+			932, 999, 932
+			};
+
 static int suspend_8960(struct tsens_priv *priv)
 {
 	int ret;
@@ -195,9 +202,7 @@  static int calibrate_8960(struct tsens_priv *priv)
 {
 	int i;
 	char *data;
-
-	ssize_t num_read = priv->num_sensors;
-	struct tsens_sensor *s = priv->sensor;
+	u32 p1[11];
 
 	data = qfprom_read(priv->dev, "calib");
 	if (IS_ERR(data))
@@ -205,49 +210,18 @@  static int calibrate_8960(struct tsens_priv *priv)
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
-	for (i = 0; i < num_read; i++, s++)
-		s->offset = data[i];
+	for (i = 0; i < priv->num_sensors; i++) {
+		p1[i] = data[i];
+		priv->sensor[i].slope = tsens_msm8960_slope[i];
+	}
+
+	compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB);
 
 	kfree(data);
 
 	return 0;
 }
 
-/* Temperature on y axis and ADC-code on x-axis */
-static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
-{
-	int slope, offset;
-
-	slope = thermal_zone_get_slope(s->tzd);
-	offset = CAL_MDEGC - slope * s->offset;
-
-	return adc_code * slope + offset;
-}
-
-static int get_temp_8960(const struct tsens_sensor *s, int *temp)
-{
-	int ret;
-	u32 code, trdy;
-	struct tsens_priv *priv = s->priv;
-	unsigned long timeout;
-
-	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-	do {
-		ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy);
-		if (ret)
-			return ret;
-		if (!(trdy & TRDY_MASK))
-			continue;
-		ret = regmap_read(priv->tm_map, s->status, &code);
-		if (ret)
-			return ret;
-		*temp = code_to_mdegC(code, s);
-		return 0;
-	} while (time_before(jiffies, timeout));
-
-	return -ETIMEDOUT;
-}
-
 static struct tsens_features tsens_8960_feat = {
 	.ver_major	= VER_0,
 	.crit_int	= 0,
@@ -316,7 +290,7 @@  static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = {
 static const struct tsens_ops ops_8960 = {
 	.init		= init_common,
 	.calibrate	= calibrate_8960,
-	.get_temp	= get_temp_8960,
+	.get_temp	= get_temp_common,
 	.enable		= enable_8960,
 	.disable	= disable_8960,
 	.suspend	= suspend_8960,