| Message ID | 20210419215707.10290-1-amonakov@ispras.ru (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Headers | show |
| Series | cpufreq: Kconfig: fix documentation links | expand |
On Tue, Apr 20, 2021 at 12:03 AM Alexander Monakov <amonakov@ispras.ru> wrote: > > User documentation for cpufreq governors and drivers has been moved to > admin-guide; adjust references from Kconfig entries accordingly. > > Remove references from undocumented cpufreq drivers, as well as the > 'userspace' cpufreq governor, for which no additional details are > provided in the admin-guide text. > > Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation") > Signed-off-by: Alexander Monakov <amonakov@ispras.ru> > Cc: Rafael Wysocki <rjw@rjwysocki.net> > Cc: Viresh Kumar <viresh.kumar@linaro.org> > Cc: linux-pm@vger.kernel.org > --- > drivers/cpufreq/Kconfig | 23 ++++++----------------- > 1 file changed, 6 insertions(+), 17 deletions(-) > > diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig > index 85de313ddec2..c3038cdc6865 100644 > --- a/drivers/cpufreq/Kconfig > +++ b/drivers/cpufreq/Kconfig > @@ -13,7 +13,8 @@ config CPU_FREQ > clock speed, you need to either enable a dynamic cpufreq governor > (see below) after boot, or use a userspace tool. > > - For details, take a look at <file:Documentation/cpu-freq>. > + For details, take a look at > + <file:Documentation/admin-guide/pm/cpufreq.rst>. > > If in doubt, say N. > > @@ -140,8 +141,6 @@ config CPU_FREQ_GOV_USERSPACE > To compile this driver as a module, choose M here: the > module will be called cpufreq_userspace. > > - For details, take a look at <file:Documentation/cpu-freq/>. > - > If in doubt, say Y. > > config CPU_FREQ_GOV_ONDEMAND > @@ -158,7 +157,8 @@ config CPU_FREQ_GOV_ONDEMAND > To compile this driver as a module, choose M here: the > module will be called cpufreq_ondemand. > > - For details, take a look at linux/Documentation/cpu-freq. > + For details, take a look at > + <file:Documentation/admin-guide/pm/cpufreq.rst>. > > If in doubt, say N. > > @@ -182,7 +182,8 @@ config CPU_FREQ_GOV_CONSERVATIVE > To compile this driver as a module, choose M here: the > module will be called cpufreq_conservative. > > - For details, take a look at linux/Documentation/cpu-freq. > + For details, take a look at > + <file:Documentation/admin-guide/pm/cpufreq.rst>. > > If in doubt, say N. > > @@ -246,8 +247,6 @@ config IA64_ACPI_CPUFREQ > This driver adds a CPUFreq driver which utilizes the ACPI > Processor Performance States. > > - For details, take a look at <file:Documentation/cpu-freq/>. > - > If in doubt, say N. > endif > > @@ -271,8 +270,6 @@ config LOONGSON2_CPUFREQ > > Loongson2F and it's successors support this feature. > > - For details, take a look at <file:Documentation/cpu-freq/>. > - > If in doubt, say N. > > config LOONGSON1_CPUFREQ > @@ -282,8 +279,6 @@ config LOONGSON1_CPUFREQ > This option adds a CPUFreq driver for loongson1 processors which > support software configurable cpu frequency. > > - For details, take a look at <file:Documentation/cpu-freq/>. > - > If in doubt, say N. > endif > > @@ -293,8 +288,6 @@ config SPARC_US3_CPUFREQ > help > This adds the CPUFreq driver for UltraSPARC-III processors. > > - For details, take a look at <file:Documentation/cpu-freq>. > - > If in doubt, say N. > > config SPARC_US2E_CPUFREQ > @@ -302,8 +295,6 @@ config SPARC_US2E_CPUFREQ > help > This adds the CPUFreq driver for UltraSPARC-IIe processors. > > - For details, take a look at <file:Documentation/cpu-freq>. > - > If in doubt, say N. > endif > > @@ -318,8 +309,6 @@ config SH_CPU_FREQ > will also generate a notice in the boot log before disabling > itself if the CPU in question is not capable of rate rounding. > > - For details, take a look at <file:Documentation/cpu-freq>. > - > If unsure, say N. > endif > > -- Applied as 5.13 material, thanks!
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 85de313ddec2..c3038cdc6865 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -13,7 +13,8 @@ config CPU_FREQ clock speed, you need to either enable a dynamic cpufreq governor (see below) after boot, or use a userspace tool. - For details, take a look at <file:Documentation/cpu-freq>. + For details, take a look at + <file:Documentation/admin-guide/pm/cpufreq.rst>. If in doubt, say N. @@ -140,8 +141,6 @@ config CPU_FREQ_GOV_USERSPACE To compile this driver as a module, choose M here: the module will be called cpufreq_userspace. - For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say Y. config CPU_FREQ_GOV_ONDEMAND @@ -158,7 +157,8 @@ config CPU_FREQ_GOV_ONDEMAND To compile this driver as a module, choose M here: the module will be called cpufreq_ondemand. - For details, take a look at linux/Documentation/cpu-freq. + For details, take a look at + <file:Documentation/admin-guide/pm/cpufreq.rst>. If in doubt, say N. @@ -182,7 +182,8 @@ config CPU_FREQ_GOV_CONSERVATIVE To compile this driver as a module, choose M here: the module will be called cpufreq_conservative. - For details, take a look at linux/Documentation/cpu-freq. + For details, take a look at + <file:Documentation/admin-guide/pm/cpufreq.rst>. If in doubt, say N. @@ -246,8 +247,6 @@ config IA64_ACPI_CPUFREQ This driver adds a CPUFreq driver which utilizes the ACPI Processor Performance States. - For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. endif @@ -271,8 +270,6 @@ config LOONGSON2_CPUFREQ Loongson2F and it's successors support this feature. - For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. config LOONGSON1_CPUFREQ @@ -282,8 +279,6 @@ config LOONGSON1_CPUFREQ This option adds a CPUFreq driver for loongson1 processors which support software configurable cpu frequency. - For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. endif @@ -293,8 +288,6 @@ config SPARC_US3_CPUFREQ help This adds the CPUFreq driver for UltraSPARC-III processors. - For details, take a look at <file:Documentation/cpu-freq>. - If in doubt, say N. config SPARC_US2E_CPUFREQ @@ -302,8 +295,6 @@ config SPARC_US2E_CPUFREQ help This adds the CPUFreq driver for UltraSPARC-IIe processors. - For details, take a look at <file:Documentation/cpu-freq>. - If in doubt, say N. endif @@ -318,8 +309,6 @@ config SH_CPU_FREQ will also generate a notice in the boot log before disabling itself if the CPU in question is not capable of rate rounding. - For details, take a look at <file:Documentation/cpu-freq>. - If unsure, say N. endif
User documentation for cpufreq governors and drivers has been moved to admin-guide; adjust references from Kconfig entries accordingly. Remove references from undocumented cpufreq drivers, as well as the 'userspace' cpufreq governor, for which no additional details are provided in the admin-guide text. Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation") Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Cc: Rafael Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-pm@vger.kernel.org --- drivers/cpufreq/Kconfig | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-)