diff mbox series

[thermal,v15,7/9] drivers: thermal: tsens: Drop unused define for msm8960

Message ID 20210420183343.2272-8-ansuelsmth@gmail.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Add support for ipq8064 tsens | expand

Commit Message

Christian Marangi April 20, 2021, 6:33 p.m. UTC
Drop unused define for msm8960 replaced by generic api and reg_field.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
---
 drivers/thermal/qcom/tsens-8960.c | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 58112f0df..67c1748cd 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -10,8 +10,6 @@ 
 #include <linux/thermal.h>
 #include "tsens.h"
 
-#define CAL_MDEGC		30000
-
 #define CONFIG_ADDR		0x3640
 #define CONFIG_ADDR_8660	0x3620
 /* CONFIG_ADDR bitmasks */
@@ -21,39 +19,19 @@ 
 #define CONFIG_SHIFT_8660	28
 #define CONFIG_MASK_8660	(3 << CONFIG_SHIFT_8660)
 
-#define STATUS_CNTL_ADDR_8064	0x3660
 #define CNTL_ADDR		0x3620
 /* CNTL_ADDR bitmasks */
 #define EN			BIT(0)
 #define SW_RST			BIT(1)
-#define SENSOR0_EN		BIT(3)
+
 #define MEASURE_PERIOD		BIT(18)
 #define SLP_CLK_ENA		BIT(26)
 #define SLP_CLK_ENA_8660	BIT(24)
 #define SENSOR0_SHIFT		3
 
-/* INT_STATUS_ADDR bitmasks */
-#define MIN_STATUS_MASK		BIT(0)
-#define LOWER_STATUS_CLR	BIT(1)
-#define UPPER_STATUS_CLR	BIT(2)
-#define MAX_STATUS_MASK		BIT(3)
-
 #define THRESHOLD_ADDR		0x3624
-/* THRESHOLD_ADDR bitmasks */
-#define THRESHOLD_MAX_LIMIT_SHIFT	24
-#define THRESHOLD_MIN_LIMIT_SHIFT	16
-#define THRESHOLD_UPPER_LIMIT_SHIFT	8
-#define THRESHOLD_LOWER_LIMIT_SHIFT	0
-
-/* Initial temperature threshold values */
-#define LOWER_LIMIT_TH		0x50
-#define UPPER_LIMIT_TH		0xdf
-#define MIN_LIMIT_TH		0x0
-#define MAX_LIMIT_TH		0xff
 
 #define INT_STATUS_ADDR		0x363c
-#define TRDY_MASK		BIT(7)
-#define TIMEOUT_US		100
 
 #define S0_STATUS_OFF		0x3628
 #define S1_STATUS_OFF		0x362c