diff mbox series

[v16,2/7] arm64: dts: mt8183: add svs device information

Message ID 20210428065440.3704-3-roger.lu@mediatek.com (mailing list archive)
State Not Applicable, archived
Headers show
Series soc: mediatek: SVS: introduce MTK SVS | expand

Commit Message

Roger Lu April 28, 2021, 6:54 a.m. UTC 
add compitable/reg/irq/clock/efuse setting in svs node

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

AngeloGioacchino Del Regno Oct. 20, 2021, 3:20 p.m. UTC | #1 
Il 28/04/21 08:54, Roger Lu ha scritto:
> add compitable/reg/irq/clock/efuse setting in svs node
> 
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 80519a145f13..441d617ece43 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -657,6 +657,18 @@
>   			status = "disabled";
>   		};
>   
> +		svs: svs@1100b000 {
> +			compatible = "mediatek,mt8183-svs";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&infracfg CLK_INFRA_THERM>;
> +			clock-names = "main";
> +			nvmem-cells = <&svs_calibration>,
> +				      <&thermal_calibration>;
> +			nvmem-cell-names = "svs-calibration-data",
> +					   "t-calibration-data";
> +		};
> +
>   		pwm0: pwm@1100e000 {
>   			compatible = "mediatek,mt8183-disp-pwm";
>   			reg = <0 0x1100e000 0 0x1000>;
> @@ -941,9 +953,15 @@
>   			reg = <0 0x11f10000 0 0x1000>;
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> +			thermal_calibration: calib@180 {
> +				reg = <0x180 0xc>;
> +			};
>   			mipi_tx_calibration: calib@190 {
>   				reg = <0x190 0xc>;
>   			};
> +			svs_calibration: calib@580 {
> +				reg = <0x580 0x64>;
> +			};
>   		};
>   
>   		u3phy: usb-phy@11f40000 {
> 

This patch doesn't apply on the latest linux-next due to some new commits in
mt8183.dtsi, can you please rebase?

Thanks,
- Angelo
Roger Lu Dec. 24, 2021, 7:33 a.m. UTC | #2 
Hi AngeloGioacchino,

Sorry for the late reply. 

On Wed, 2021-10-20 at 17:20 +0200, AngeloGioacchino Del Regno wrote:
> Il 28/04/21 08:54, Roger Lu ha scritto:
> > add compitable/reg/irq/clock/efuse setting in svs node
> > 
> > Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
> >   1 file changed, 18 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 80519a145f13..441d617ece43 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -657,6 +657,18 @@
> >   			status = "disabled";
> >   		};
> >   
> > +		svs: svs@1100b000 {
> > +			compatible = "mediatek,mt8183-svs";
> > +			reg = <0 0x1100b000 0 0x1000>;
> > +			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&infracfg CLK_INFRA_THERM>;
> > +			clock-names = "main";
> > +			nvmem-cells = <&svs_calibration>,
> > +				      <&thermal_calibration>;
> > +			nvmem-cell-names = "svs-calibration-data",
> > +					   "t-calibration-data";
> > +		};
> > +
> >   		pwm0: pwm@1100e000 {
> >   			compatible = "mediatek,mt8183-disp-pwm";
> >   			reg = <0 0x1100e000 0 0x1000>;
> > @@ -941,9 +953,15 @@
> >   			reg = <0 0x11f10000 0 0x1000>;
> >   			#address-cells = <1>;
> >   			#size-cells = <1>;
> > +			thermal_calibration: calib@180 {
> > +				reg = <0x180 0xc>;
> > +			};
> >   			mipi_tx_calibration: calib@190 {
> >   				reg = <0x190 0xc>;
> >   			};
> > +			svs_calibration: calib@580 {
> > +				reg = <0x580 0x64>;
> > +			};
> >   		};
> >   
> >   		u3phy: usb-phy@11f40000 {
> > 
> 
> This patch doesn't apply on the latest linux-next due to some new commits in
> mt8183.dtsi, can you please rebase?

Okay. I'll rebase it.

> Thanks,
> - Angelo
Matthias Brugger Dec. 30, 2021, 12:54 p.m. UTC | #3 
On 28/04/2021 08:54, Roger Lu wrote:
> add compitable/reg/irq/clock/efuse setting in svs node
> 
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
>   1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 80519a145f13..441d617ece43 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -657,6 +657,18 @@
>   			status = "disabled";
>   		};
>   
> +		svs: svs@1100b000 {
> +			compatible = "mediatek,mt8183-svs";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&infracfg CLK_INFRA_THERM>;
> +			clock-names = "main";
> +			nvmem-cells = <&svs_calibration>,
> +				      <&thermal_calibration>;
> +			nvmem-cell-names = "svs-calibration-data",
> +					   "t-calibration-data";
> +		};
> +
>   		pwm0: pwm@1100e000 {
>   			compatible = "mediatek,mt8183-disp-pwm";
>   			reg = <0 0x1100e000 0 0x1000>;
> @@ -941,9 +953,15 @@
>   			reg = <0 0x11f10000 0 0x1000>;
>   			#address-cells = <1>;
>   			#size-cells = <1>;

Please add a new line between the different calibartion data, to improve 
readability.

Regards,
Matthias

> +			thermal_calibration: calib@180 {
> +				reg = <0x180 0xc>;
> +			};
>   			mipi_tx_calibration: calib@190 {
>   				reg = <0x190 0xc>;
>   			};
> +			svs_calibration: calib@580 {
> +				reg = <0x580 0x64>;
> +			};
>   		};
>   
>   		u3phy: usb-phy@11f40000 {
>
Roger Lu Jan. 3, 2022, 6:08 a.m. UTC | #4 
Hi Matthias,

On Thu, 2021-12-30 at 13:54 +0100, Matthias Brugger wrote:
> 
> On 28/04/2021 08:54, Roger Lu wrote:
> > add compitable/reg/irq/clock/efuse setting in svs node
> > 
> > Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8183.dtsi | 18 ++++++++++++++++++
> >   1 file changed, 18 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 80519a145f13..441d617ece43 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -657,6 +657,18 @@
> >   			status = "disabled";
> >   		};
> >   
> > +		svs: svs@1100b000 {
> > +			compatible = "mediatek,mt8183-svs";
> > +			reg = <0 0x1100b000 0 0x1000>;
> > +			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&infracfg CLK_INFRA_THERM>;
> > +			clock-names = "main";
> > +			nvmem-cells = <&svs_calibration>,
> > +				      <&thermal_calibration>;
> > +			nvmem-cell-names = "svs-calibration-data",
> > +					   "t-calibration-data";
> > +		};
> > +
> >   		pwm0: pwm@1100e000 {
> >   			compatible = "mediatek,mt8183-disp-pwm";
> >   			reg = <0 0x1100e000 0 0x1000>;
> > @@ -941,9 +953,15 @@
> >   			reg = <0 0x11f10000 0 0x1000>;
> >   			#address-cells = <1>;
> >   			#size-cells = <1>;
> 
> Please add a new line between the different calibartion data, to improve 
> readability.

No problem and thanks for the review.

> Regards,
> Matthias
> 
> > +			thermal_calibration: calib@180 {
> > +				reg = <0x180 0xc>;
> > +			};
> >   			mipi_tx_calibration: calib@190 {
> >   				reg = <0x190 0xc>;
> >   			};
> > +			svs_calibration: calib@580 {
> > +				reg = <0x580 0x64>;
> > +			};
> >   		};
> >   
> >   		u3phy: usb-phy@11f40000 {
> >
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 80519a145f13..441d617ece43 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -657,6 +657,18 @@ 
 			status = "disabled";
 		};
 
+		svs: svs@1100b000 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		pwm0: pwm@1100e000 {
 			compatible = "mediatek,mt8183-disp-pwm";
 			reg = <0 0x1100e000 0 0x1000>;
@@ -941,9 +953,15 @@ 
 			reg = <0 0x11f10000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
 			mipi_tx_calibration: calib@190 {
 				reg = <0x190 0xc>;
 			};
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy: usb-phy@11f40000 {