diff mbox series

[v2,1/5] firmware: qcom_scm: Introduce SCM calls to access LMh

Message ID 20210624115813.3613290-2-thara.gopinath@linaro.org (mailing list archive)
State Not Applicable, archived
Headers show
Series Introduce LMh driver for Qualcomm SoCs | expand

Commit Message

Thara Gopinath June 24, 2021, 11:58 a.m. UTC
Introduce SCM calls to access/configure limits management hardware(LMH).

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---

v1->v2:
	Changed the input parameters in qcom_scm_lmh_dcvsh from payload_buf and
	payload_size to payload_fn, payload_reg, payload_val as per Bjorn's review
	comments.

 drivers/firmware/qcom_scm.c | 54 +++++++++++++++++++++++++++++++++++++
 drivers/firmware/qcom_scm.h |  4 +++
 include/linux/qcom_scm.h    | 14 ++++++++++
 3 files changed, 72 insertions(+)

Comments

Matthias Kaehlcke June 24, 2021, 5:48 p.m. UTC | #1
On Thu, Jun 24, 2021 at 07:58:09AM -0400, Thara Gopinath wrote:
> Introduce SCM calls to access/configure limits management hardware(LMH).
> 
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
> 
> v1->v2:
> 	Changed the input parameters in qcom_scm_lmh_dcvsh from payload_buf and
> 	payload_size to payload_fn, payload_reg, payload_val as per Bjorn's review
> 	comments.
> 
>  drivers/firmware/qcom_scm.c | 54 +++++++++++++++++++++++++++++++++++++
>  drivers/firmware/qcom_scm.h |  4 +++
>  include/linux/qcom_scm.h    | 14 ++++++++++
>  3 files changed, 72 insertions(+)
> 
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index ee9cb545e73b..19e9fb91d084 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -1147,6 +1147,60 @@ int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
>  }
>  EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
>  
> +bool qcom_scm_lmh_dcvsh_available(void)
> +{
> +	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH);
> +}
> +EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available);
> +
> +int qcom_scm_lmh_profile_change(u32 profile_id)
> +{
> +	struct qcom_scm_desc desc = {
> +		.svc = QCOM_SCM_SVC_LMH,
> +		.cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE,
> +		.arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL),
> +		.args[0] = profile_id,
> +		.owner = ARM_SMCCC_OWNER_SIP,
> +	};
> +
> +	return qcom_scm_call(__scm->dev, &desc, NULL);
> +}
> +EXPORT_SYMBOL(qcom_scm_lmh_profile_change);
> +
> +int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
> +		       u64 limit_node, u32 node_id, u64 version)
> +{
> +	dma_addr_t payload_phys;
> +	u32 *payload_buf;
> +	int payload_size = 5 * sizeof(u32);
> +
> +	struct qcom_scm_desc desc = {
> +		.svc = QCOM_SCM_SVC_LMH,
> +		.cmd = QCOM_SCM_LMH_LIMIT_DCVSH,
> +		.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL,
> +					QCOM_SCM_VAL, QCOM_SCM_VAL),
> +		.args[1] = payload_size,
> +		.args[2] = limit_node,
> +		.args[3] = node_id,
> +		.args[4] = version,
> +		.owner = ARM_SMCCC_OWNER_SIP,
> +	};
> +
> +	payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL);
> +	if (!payload_buf)
> +		return -ENOMEM;
> +
> +	payload_buf[0] = payload_fn;
> +	payload_buf[1] = 0;
> +	payload_buf[2] = payload_reg;
> +	payload_buf[3] = 1;
> +	payload_buf[4] = payload_val;
> +
> +	desc.args[0] = payload_phys;
> +	return qcom_scm_call(__scm->dev, &desc, NULL);

dma_free_coherent()?
Thara Gopinath June 25, 2021, 3:45 p.m. UTC | #2
On 6/24/21 1:48 PM, Matthias Kaehlcke wrote:
> On Thu, Jun 24, 2021 at 07:58:09AM -0400, Thara Gopinath wrote:
>> Introduce SCM calls to access/configure limits management hardware(LMH).
>>
>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
>> ---
>>
>> v1->v2:
>> 	Changed the input parameters in qcom_scm_lmh_dcvsh from payload_buf and
>> 	payload_size to payload_fn, payload_reg, payload_val as per Bjorn's review
>> 	comments.
>>
>>   drivers/firmware/qcom_scm.c | 54 +++++++++++++++++++++++++++++++++++++
>>   drivers/firmware/qcom_scm.h |  4 +++
>>   include/linux/qcom_scm.h    | 14 ++++++++++
>>   3 files changed, 72 insertions(+)
>>
>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
>> index ee9cb545e73b..19e9fb91d084 100644
>> --- a/drivers/firmware/qcom_scm.c
>> +++ b/drivers/firmware/qcom_scm.c
>> @@ -1147,6 +1147,60 @@ int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
>>   }
>>   EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
>>   
>> +bool qcom_scm_lmh_dcvsh_available(void)
>> +{
>> +	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH);
>> +}
>> +EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available);
>> +
>> +int qcom_scm_lmh_profile_change(u32 profile_id)
>> +{
>> +	struct qcom_scm_desc desc = {
>> +		.svc = QCOM_SCM_SVC_LMH,
>> +		.cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE,
>> +		.arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL),
>> +		.args[0] = profile_id,
>> +		.owner = ARM_SMCCC_OWNER_SIP,
>> +	};
>> +
>> +	return qcom_scm_call(__scm->dev, &desc, NULL);
>> +}
>> +EXPORT_SYMBOL(qcom_scm_lmh_profile_change);
>> +
>> +int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
>> +		       u64 limit_node, u32 node_id, u64 version)
>> +{
>> +	dma_addr_t payload_phys;
>> +	u32 *payload_buf;
>> +	int payload_size = 5 * sizeof(u32);
>> +
>> +	struct qcom_scm_desc desc = {
>> +		.svc = QCOM_SCM_SVC_LMH,
>> +		.cmd = QCOM_SCM_LMH_LIMIT_DCVSH,
>> +		.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL,
>> +					QCOM_SCM_VAL, QCOM_SCM_VAL),
>> +		.args[1] = payload_size,
>> +		.args[2] = limit_node,
>> +		.args[3] = node_id,
>> +		.args[4] = version,
>> +		.owner = ARM_SMCCC_OWNER_SIP,
>> +	};
>> +
>> +	payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL);
>> +	if (!payload_buf)
>> +		return -ENOMEM;
>> +
>> +	payload_buf[0] = payload_fn;
>> +	payload_buf[1] = 0;
>> +	payload_buf[2] = payload_reg;
>> +	payload_buf[3] = 1;
>> +	payload_buf[4] = payload_val;
>> +
>> +	desc.args[0] = payload_phys;
>> +	return qcom_scm_call(__scm->dev, &desc, NULL);
> 
> dma_free_coherent()?

yep.. A free should be done here. Will fix it

>
diff mbox series

Patch

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index ee9cb545e73b..19e9fb91d084 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1147,6 +1147,60 @@  int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
 }
 EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
 
+bool qcom_scm_lmh_dcvsh_available(void)
+{
+	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available);
+
+int qcom_scm_lmh_profile_change(u32 profile_id)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_LMH,
+		.cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE,
+		.arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL),
+		.args[0] = profile_id,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_profile_change);
+
+int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+		       u64 limit_node, u32 node_id, u64 version)
+{
+	dma_addr_t payload_phys;
+	u32 *payload_buf;
+	int payload_size = 5 * sizeof(u32);
+
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_LMH,
+		.cmd = QCOM_SCM_LMH_LIMIT_DCVSH,
+		.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL,
+					QCOM_SCM_VAL, QCOM_SCM_VAL),
+		.args[1] = payload_size,
+		.args[2] = limit_node,
+		.args[3] = node_id,
+		.args[4] = version,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL);
+	if (!payload_buf)
+		return -ENOMEM;
+
+	payload_buf[0] = payload_fn;
+	payload_buf[1] = 0;
+	payload_buf[2] = payload_reg;
+	payload_buf[3] = 1;
+	payload_buf[4] = payload_val;
+
+	desc.args[0] = payload_phys;
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_dcvsh);
+
 static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
 {
 	struct device_node *tcsr;
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 632fe3142462..d92156ceb3ac 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -114,6 +114,10 @@  extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 #define QCOM_SCM_SVC_HDCP		0x11
 #define QCOM_SCM_HDCP_INVOKE		0x01
 
+#define QCOM_SCM_SVC_LMH			0x13
+#define QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE	0x01
+#define QCOM_SCM_LMH_LIMIT_DCVSH		0x10
+
 #define QCOM_SCM_SVC_SMMU_PROGRAM		0x15
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 0165824c5128..c0475d1c9885 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -109,6 +109,12 @@  extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 			     u32 *resp);
 
 extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
+
+extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+			      u64 limit_node, u32 node_id, u64 version);
+extern int qcom_scm_lmh_profile_change(u32 profile_id);
+extern bool qcom_scm_lmh_dcvsh_available(void);
+
 #else
 
 #include <linux/errno.h>
@@ -170,5 +176,13 @@  static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 
 static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
 		{ return -ENODEV; }
+
+static inline int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+				     u64 limit_node, u32 node_id, u64 version)
+		{ return -ENODEV; }
+
+static inline int qcom_scm_lmh_profile_change(u32 profile_id) { return -ENODEV; }
+
+static inline bool qcom_scm_lmh_dcvsh_available(void) { return -ENODEV; }
 #endif
 #endif