@@ -10,6 +10,7 @@
* Viresh Kumar <viresh.kumar@linaro.org>
*
*/
+#include <linux/active_stats.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/cpu_cooling.h>
@@ -61,6 +62,7 @@ struct time_in_idle {
* @policy: cpufreq policy.
* @idle_time: idle time stats
* @qos_req: PM QoS contraint to apply
+ * @ast_mon: Active Stats Monitor array of pointers
*
* This structure is required for keeping information of each registered
* cpufreq_cooling_device.
@@ -75,6 +77,9 @@ struct cpufreq_cooling_device {
struct time_in_idle *idle_time;
#endif
struct freq_qos_request qos_req;
+#ifdef CONFIG_ACTIVE_STATS
+ struct active_stats_monitor **ast_mon;
+#endif
};
#ifdef CONFIG_THERMAL_GOV_POWER_ALLOCATOR
@@ -124,6 +129,107 @@ static u32 cpu_power_to_freq(struct cpufreq_cooling_device *cpufreq_cdev,
return cpufreq_cdev->em->table[i].frequency;
}
+#ifdef CONFIG_ACTIVE_STATS
+static u32 account_cpu_power(struct active_stats_monitor *ast_mon,
+ struct em_perf_domain *em)
+{
+ u64 single_power, residency, total_time;
+ struct active_stats_state *result;
+ u32 power = 0;
+ int i;
+
+ mutex_lock(&ast_mon->lock);
+ result = ast_mon->snapshot.result;
+ total_time = ast_mon->local_period;
+
+ for (i = 0; i < ast_mon->states_count; i++) {
+ residency = result->residency[i];
+ single_power = em->table[i].power * residency;
+ single_power = div64_u64(single_power, total_time);
+ power += (u32)single_power;
+ }
+
+ mutex_unlock(&ast_mon->lock);
+
+ return power;
+}
+
+static u32 get_power_est(struct cpufreq_cooling_device *cdev)
+{
+ int num_cpus, ret, i;
+ u32 total_power = 0;
+
+ num_cpus = cpumask_weight(cdev->policy->related_cpus);
+
+ for (i = 0; i < num_cpus; i++) {
+ ret = active_stats_cpu_update_monitor(cdev->ast_mon[i]);
+ if (ret)
+ return 0;
+
+ total_power += account_cpu_power(cdev->ast_mon[i], cdev->em);
+ }
+
+ return total_power;
+}
+
+static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
+ u32 *power)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+ struct cpufreq_policy *policy = cpufreq_cdev->policy;
+
+ *power = get_power_est(cpufreq_cdev);
+
+ trace_thermal_power_cpu_get_power(policy->related_cpus, 0, 0, 0,
+ *power);
+
+ return 0;
+}
+
+static void clean_cpu_monitoring(struct cpufreq_cooling_device *cdev)
+{
+ int num_cpus, i;
+
+ if (!cdev->ast_mon)
+ return;
+
+ num_cpus = cpumask_weight(cdev->policy->related_cpus);
+
+ for (i = 0; i < num_cpus; i++)
+ active_stats_cpu_free_monitor(cdev->ast_mon[i++]);
+
+ kfree(cdev->ast_mon);
+ cdev->ast_mon = NULL;
+}
+
+static int setup_cpu_monitoring(struct cpufreq_cooling_device *cdev)
+{
+ int cpu, cpus, i = 0;
+
+ if (cdev->ast_mon)
+ return 0;
+
+ cpus = cpumask_weight(cdev->policy->related_cpus);
+
+ cdev->ast_mon = kcalloc(cpus, sizeof(struct active_stats_monitor *),
+ GFP_KERNEL);
+ if (!cdev->ast_mon)
+ return -ENOMEM;
+
+ for_each_cpu(cpu, cdev->policy->related_cpus) {
+ cdev->ast_mon[i] = active_stats_cpu_setup_monitor(cpu);
+ if (IS_ERR_OR_NULL(cdev->ast_mon[i++]))
+ goto cleanup;
+ }
+
+ return 0;
+
+cleanup:
+ clean_cpu_monitoring(cdev);
+ return -EINVAL;
+}
+#else
+
/**
* get_load() - get load for a cpu
* @cpufreq_cdev: struct cpufreq_cooling_device for the cpu
@@ -184,6 +290,15 @@ static u32 get_dynamic_power(struct cpufreq_cooling_device *cpufreq_cdev,
return (raw_cpu_power * cpufreq_cdev->last_load) / 100;
}
+static void clean_cpu_monitoring(struct cpufreq_cooling_device *cpufreq_cdev)
+{
+}
+
+static int setup_cpu_monitoring(struct cpufreq_cooling_device *cpufreq_cdev)
+{
+ return 0;
+}
+
/**
* cpufreq_get_requested_power() - get the current power
* @cdev: &thermal_cooling_device pointer
@@ -252,6 +367,7 @@ static int cpufreq_get_requested_power(struct thermal_cooling_device *cdev,
return 0;
}
+#endif
/**
* cpufreq_state2power() - convert a cpu cdev state to power consumed
@@ -323,6 +439,20 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev,
return 0;
}
+static int cpufreq_change_governor(struct thermal_cooling_device *cdev,
+ bool governor_up)
+{
+ struct cpufreq_cooling_device *cpufreq_cdev = cdev->devdata;
+ int ret = 0;
+
+ if (governor_up)
+ ret = setup_cpu_monitoring(cpufreq_cdev);
+ else
+ clean_cpu_monitoring(cpufreq_cdev);
+
+ return ret;
+}
+
static inline bool em_is_sane(struct cpufreq_cooling_device *cpufreq_cdev,
struct em_perf_domain *em) {
struct cpufreq_policy *policy;
@@ -566,6 +696,7 @@ __cpufreq_cooling_register(struct device_node *np,
cooling_ops->get_requested_power = cpufreq_get_requested_power;
cooling_ops->state2power = cpufreq_state2power;
cooling_ops->power2state = cpufreq_power2state;
+ cooling_ops->change_governor = cpufreq_change_governor;
} else
#endif
if (policy->freq_table_sorted == CPUFREQ_TABLE_UNSORTED) {
@@ -690,6 +821,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
thermal_cooling_device_unregister(cdev);
freq_qos_remove_request(&cpufreq_cdev->qos_req);
+ clean_cpu_monitoring(cpufreq_cdev);
free_idle_time(cpufreq_cdev);
kfree(cpufreq_cdev);
}
The cpufreq_cooling has dedicated APIs for thermal governor called Intelligent Power Allocation (IPA). IPA needs the CPUs power used by the devices in the past. Based on this, IPA tries to estimate the power budget, allocate new budget and split it across cooling devices for the next period (keeping the system in the thermal envelope). When the input power estimated value has big error, the whole mechanism does not work properly. The current power estimation assumes constant frequency during the whole IPA period (e.g. 100ms). This can cause big error in the power estimation, especially when SchedUtil governor is used and frequency is often adjusted to the current need. This can be visible in periodic workloads, when the frequency oscillates between two OPPs and IPA samples the lower frequency. This patch introduces a new mechanism which solves this frequency sampling problem. It uses Active Stats framework to track and account the CPU power used for a given IPA period. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> --- drivers/thermal/cpufreq_cooling.c | 132 ++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+)