| Message ID | 20211103091924.32742-2-j-keerthy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | thermal: k3_j72xx_bandgap: Add the bandgap driver support | expand |
On Wed, Nov 03, 2021 at 02:49:21PM +0530, Keerthy wrote: > Add VTM bindings documentation. In the Voltage Thermal > Management Module(VTM), K3 J72XX supplies a voltage > reference and a temperature sensor feature that are gathered in the band > gap voltage and temperature sensor (VBGAPTS) module. The band > gap provides current and voltage reference for its internal > circuits and other analog IP blocks. The analog-to-digital > converter (ADC) produces an output value that is proportional > to the silicon temperature. > > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml > new file mode 100644 > index 000000000000..8483c495cb9a > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments J72XX VTM (DTS) binding > + > +maintainers: > + - Keerthy <j-keerthy@ti.com> > + > +properties: > + compatible: > + const: ti,j721e-vtm > + oneOf: > + - enum: > + - ti,j721e-vtm > + - ti,j7200-vtm Again, this isn't correct. In C like logic, it is saying compatible is (ti,j721e-vtm && (ti,j721e-vtm || ti,j7200-vtm)) which is just 'ti,j721e-vtm'. I think you want just the 'enum'. > + > + reg: > + maxItems: 3 What is each entry? > + > + power-domains: > + maxItems: 1 > + > + "#thermal-sensor-cells": > + const: 1 > + > +required: > + - compatible > + - reg > + - power-domains > + - "#thermal-sensor-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + wkup_vtm0: wkup_vtm0@42040000 { thermal-sensor@... > + compatible = "ti,j721e-vtm"; > + reg = <0x42040000 0x350>, > + <0x42050000 0x350>, > + <0x43000300 0x10>; > + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; > + #thermal-sensor-cells = <1>; > + }; > + > + mpu_thermal: mpu_thermal { mpu-thermal > + polling-delay-passive = <250>; /* milliseconds */ > + polling-delay = <500>; /* milliseconds */ > + thermal-sensors = <&wkup_vtm0 0>; > + > + trips { > + mpu_crit: mpu_crit { mpu-crit > + temperature = <125000>; /* milliCelsius */ > + hysteresis = <2000>; /* milliCelsius */ > + type = "critical"; > + }; > + }; > + }; > +... > -- > 2.17.1 > >
diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml new file mode 100644 index 000000000000..8483c495cb9a --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,j72xx-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments J72XX VTM (DTS) binding + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + const: ti,j721e-vtm + oneOf: + - enum: + - ti,j721e-vtm + - ti,j7200-vtm + + reg: + maxItems: 3 + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + - power-domains + - "#thermal-sensor-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + wkup_vtm0: wkup_vtm0@42040000 { + compatible = "ti,j721e-vtm"; + reg = <0x42040000 0x350>, + <0x42050000 0x350>, + <0x43000300 0x10>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu_thermal: mpu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu_crit: mpu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 J72XX supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Signed-off-by: Keerthy <j-keerthy@ti.com> --- .../bindings/thermal/ti,j72xx-thermal.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml