| Message ID | 20211221133937.173618-1-y.oudjana@protonmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | dt-bindings: power: avs: qcom,cpr: Convert to DT schema | expand |
On Tue, 21 Dec 2021 13:40:05 +0000, Yassine Oudjana wrote: > Convert qcom,cpr.txt to DT schema format. > > Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> > --- > .../bindings/power/avs/qcom,cpr.txt | 130 -------------- > .../bindings/power/avs/qcom,cpr.yaml | 161 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 162 insertions(+), 131 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/power/avs/qcom,cpr.example.dt.yaml:0:0: /example-0/cpr-opp-table: failed to match any schema with compatible: ['operating-points-v2-qcom-level'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1571666 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
On Tue, Dec 21, 2021 at 01:40:05PM +0000, Yassine Oudjana wrote: > Convert qcom,cpr.txt to DT schema format. > > Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> > --- > .../bindings/power/avs/qcom,cpr.txt | 130 -------------- > .../bindings/power/avs/qcom,cpr.yaml | 161 ++++++++++++++++++ > MAINTAINERS | 2 +- > 3 files changed, 162 insertions(+), 131 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > new file mode 100644 > index 000000000000..852eb36eea93 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > @@ -0,0 +1,161 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Core Power Reduction (CPR) bindings > + > +maintainers: > + - Niklas Cassel <nks@flawful.org> > + > +description: | > + CPR (Core Power Reduction) is a technology to reduce core power on a CPU > + or other device. Each OPP of a device corresponds to a "corner" that has > + a range of valid voltages for a particular frequency. While the device is > + running at a particular frequency, CPR monitors dynamic factors such as > + temperature, etc. and suggests adjustments to the voltage to save power > + and meet silicon characteristic requirements. > + > +properties: > + compatible: > + allOf: Don't need allOf with only 1 entry. > + - items: > + - enum: > + - qcom,qcs404-cpr > + - const: qcom,cpr > + > + reg: > + description: Base address and size of the RBCPR register region. > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + items: > + - description: Reference clock. > + > + clock-names: > + items: > + - const: ref > + > + vdd-apc-supply: > + description: APC regulator supply. > + > + '#power-domain-cells': > + const: 0 > + > + operating-points-v2: > + description: | > + A phandle to the OPP table containing the performance states > + supported by the CPR power domain. > + > + acc-syscon: > + description: A phandle to the syscon used for writing ACC settings. > + > + nvmem-cells: > + items: > + - description: Corner 1 quotient offset > + - description: Corner 2 quotient offset > + - description: Corner 3 quotient offset > + - description: Corner 1 initial voltage > + - description: Corner 2 initial voltage > + - description: Corner 3 initial voltage > + - description: Corner 1 quotient > + - description: Corner 2 quotient > + - description: Corner 3 quotient > + - description: Corner 1 ring oscillator > + - description: Corner 2 ring oscillator > + - description: Corner 3 ring oscillator > + - description: Fuse revision > + > + nvmem-cell-names: > + items: > + - const: cpr_quotient_offset1 > + - const: cpr_quotient_offset2 > + - const: cpr_quotient_offset3 > + - const: cpr_init_voltage1 > + - const: cpr_init_voltage2 > + - const: cpr_init_voltage3 > + - const: cpr_quotient1 > + - const: cpr_quotient2 > + - const: cpr_quotient3 > + - const: cpr_ring_osc1 > + - const: cpr_ring_osc2 > + - const: cpr_ring_osc3 > + - const: cpr_fuse_revision > + > +required: > + - compatible > + - reg > + - interrupts > + - clocks > + - clock-names > + - vdd-apc-supply > + - '#power-domain-cells' > + - operating-points-v2 > + - nvmem-cells > + - nvmem-cell-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + cpr_opp_table: cpr-opp-table { > + compatible = "operating-points-v2-qcom-level"; > + > + cpr_opp1: opp1 { > + opp-level = <1>; > + qcom,opp-fuse-level = <1>; > + }; > + cpr_opp2: opp2 { > + opp-level = <2>; > + qcom,opp-fuse-level = <2>; > + }; > + cpr_opp3: opp3 { > + opp-level = <3>; > + qcom,opp-fuse-level = <3>; > + }; > + }; > + > + power-controller@b018000 { > + compatible = "qcom,qcs404-cpr", "qcom,cpr"; > + reg = <0x0b018000 0x1000>; > + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; > + clocks = <&xo_board>; > + clock-names = "ref"; > + vdd-apc-supply = <&pms405_s3>; > + #power-domain-cells = <0>; > + operating-points-v2 = <&cpr_opp_table>; > + acc-syscon = <&tcsr>; > + > + nvmem-cells = <&cpr_efuse_quot_offset1>, > + <&cpr_efuse_quot_offset2>, > + <&cpr_efuse_quot_offset3>, > + <&cpr_efuse_init_voltage1>, > + <&cpr_efuse_init_voltage2>, > + <&cpr_efuse_init_voltage3>, > + <&cpr_efuse_quot1>, > + <&cpr_efuse_quot2>, > + <&cpr_efuse_quot3>, > + <&cpr_efuse_ring1>, > + <&cpr_efuse_ring2>, > + <&cpr_efuse_ring3>, > + <&cpr_efuse_revision>; > + nvmem-cell-names = "cpr_quotient_offset1", > + "cpr_quotient_offset2", > + "cpr_quotient_offset3", > + "cpr_init_voltage1", > + "cpr_init_voltage2", > + "cpr_init_voltage3", > + "cpr_quotient1", > + "cpr_quotient2", > + "cpr_quotient3", > + "cpr_ring_osc1", > + "cpr_ring_osc2", > + "cpr_ring_osc3", > + "cpr_fuse_revision"; > + }; > diff --git a/MAINTAINERS b/MAINTAINERS > index a7d86182fa6b..9ebbccb0494e 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -15746,7 +15746,7 @@ M: Niklas Cassel <nks@flawful.org> > L: linux-pm@vger.kernel.org > L: linux-arm-msm@vger.kernel.org > S: Maintained > -F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > +F: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > F: drivers/soc/qcom/cpr.c > > QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 > -- > 2.34.1 > > >
On Tue, 21 Dec 2021 19:15:25 -0400, Rob Herring <robh@kernel.org> wrote: > On Tue, Dec 21, 2021 at 01:40:05PM +0000, Yassine Oudjana wrote: > > Convert qcom,cpr.txt to DT schema format. > > > > Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> > > --- > > .../bindings/power/avs/qcom,cpr.txt | 130 -------------- > > .../bindings/power/avs/qcom,cpr.yaml | 161 ++++++++++++++++++ > > MAINTAINERS | 2 +- > > 3 files changed, 162 insertions(+), 131 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > > create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > > > diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > new file mode 100644 > > index 000000000000..852eb36eea93 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > @@ -0,0 +1,161 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Qualcomm Core Power Reduction (CPR) bindings > > + > > +maintainers: > > + - Niklas Cassel <nks@flawful.org> > > + > > +description: | > > + CPR (Core Power Reduction) is a technology to reduce core power on a CPU > > + or other device. Each OPP of a device corresponds to a "corner" that has > > + a range of valid voltages for a particular frequency. While the device is > > + running at a particular frequency, CPR monitors dynamic factors such as > > + temperature, etc. and suggests adjustments to the voltage to save power > > + and meet silicon characteristic requirements. > > + > > +properties: > > + compatible: > > + allOf: > > Don't need allOf with only 1 entry. I get this from dt_binding_check without it: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml: properties:compatible: [{'items': [{'enum': ['qcom,qcs404-cpr']}, {'const': 'qcom,cpr'}]}] is not of type 'object', 'boolean' > > > + - items: > > + - enum: > > + - qcom,qcs404-cpr > > + - const: qcom,cpr > > + > > + reg: > > + description: Base address and size of the RBCPR register region. > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + clocks: > > + items: > > + - description: Reference clock. > > + > > + clock-names: > > + items: > > + - const: ref > > + > > + vdd-apc-supply: > > + description: APC regulator supply. > > + > > + '#power-domain-cells': > > + const: 0 > > + > > + operating-points-v2: > > + description: | > > + A phandle to the OPP table containing the performance states > > + supported by the CPR power domain. > > + > > + acc-syscon: > > + description: A phandle to the syscon used for writing ACC settings. > > + > > + nvmem-cells: > > + items: > > + - description: Corner 1 quotient offset > > + - description: Corner 2 quotient offset > > + - description: Corner 3 quotient offset > > + - description: Corner 1 initial voltage > > + - description: Corner 2 initial voltage > > + - description: Corner 3 initial voltage > > + - description: Corner 1 quotient > > + - description: Corner 2 quotient > > + - description: Corner 3 quotient > > + - description: Corner 1 ring oscillator > > + - description: Corner 2 ring oscillator > > + - description: Corner 3 ring oscillator > > + - description: Fuse revision > > + > > + nvmem-cell-names: > > + items: > > + - const: cpr_quotient_offset1 > > + - const: cpr_quotient_offset2 > > + - const: cpr_quotient_offset3 > > + - const: cpr_init_voltage1 > > + - const: cpr_init_voltage2 > > + - const: cpr_init_voltage3 > > + - const: cpr_quotient1 > > + - const: cpr_quotient2 > > + - const: cpr_quotient3 > > + - const: cpr_ring_osc1 > > + - const: cpr_ring_osc2 > > + - const: cpr_ring_osc3 > > + - const: cpr_fuse_revision > > + > > +required: > > + - compatible > > + - reg > > + - interrupts > > + - clocks > > + - clock-names > > + - vdd-apc-supply > > + - '#power-domain-cells' > > + - operating-points-v2 > > + - nvmem-cells > > + - nvmem-cell-names > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + > > + cpr_opp_table: cpr-opp-table { > > + compatible = "operating-points-v2-qcom-level"; > > + > > + cpr_opp1: opp1 { > > + opp-level = <1>; > > + qcom,opp-fuse-level = <1>; > > + }; > > + cpr_opp2: opp2 { > > + opp-level = <2>; > > + qcom,opp-fuse-level = <2>; > > + }; > > + cpr_opp3: opp3 { > > + opp-level = <3>; > > + qcom,opp-fuse-level = <3>; > > + }; > > + }; > > + > > + power-controller@b018000 { > > + compatible = "qcom,qcs404-cpr", "qcom,cpr"; > > + reg = <0x0b018000 0x1000>; > > + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; > > + clocks = <&xo_board>; > > + clock-names = "ref"; > > + vdd-apc-supply = <&pms405_s3>; > > + #power-domain-cells = <0>; > > + operating-points-v2 = <&cpr_opp_table>; > > + acc-syscon = <&tcsr>; > > + > > + nvmem-cells = <&cpr_efuse_quot_offset1>, > > + <&cpr_efuse_quot_offset2>, > > + <&cpr_efuse_quot_offset3>, > > + <&cpr_efuse_init_voltage1>, > > + <&cpr_efuse_init_voltage2>, > > + <&cpr_efuse_init_voltage3>, > > + <&cpr_efuse_quot1>, > > + <&cpr_efuse_quot2>, > > + <&cpr_efuse_quot3>, > > + <&cpr_efuse_ring1>, > > + <&cpr_efuse_ring2>, > > + <&cpr_efuse_ring3>, > > + <&cpr_efuse_revision>; > > + nvmem-cell-names = "cpr_quotient_offset1", > > + "cpr_quotient_offset2", > > + "cpr_quotient_offset3", > > + "cpr_init_voltage1", > > + "cpr_init_voltage2", > > + "cpr_init_voltage3", > > + "cpr_quotient1", > > + "cpr_quotient2", > > + "cpr_quotient3", > > + "cpr_ring_osc1", > > + "cpr_ring_osc2", > > + "cpr_ring_osc3", > > + "cpr_fuse_revision"; > > + }; > > diff --git a/MAINTAINERS b/MAINTAINERS > > index a7d86182fa6b..9ebbccb0494e 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -15746,7 +15746,7 @@ M: Niklas Cassel <nks@flawful.org> > > L: linux-pm@vger.kernel.org > > L: linux-arm-msm@vger.kernel.org > > S: Maintained > > -F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > > +F: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > F: drivers/soc/qcom/cpr.c > > > > QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096 > > -- > > 2.34.1 > > > > > > >
On Mon, Jan 3, 2022 at 10:14 PM Yassine Oudjana <y.oudjana@protonmail.com> wrote: > > On Tue, 21 Dec 2021 19:15:25 -0400, Rob Herring <robh@kernel.org> wrote: > > On Tue, Dec 21, 2021 at 01:40:05PM +0000, Yassine Oudjana wrote: > > > Convert qcom,cpr.txt to DT schema format. > > > > > > Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> > > > --- > > > .../bindings/power/avs/qcom,cpr.txt | 130 -------------- > > > .../bindings/power/avs/qcom,cpr.yaml | 161 ++++++++++++++++++ > > > MAINTAINERS | 2 +- > > > 3 files changed, 162 insertions(+), 131 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt > > > create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > > > > > > diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > > new file mode 100644 > > > index 000000000000..852eb36eea93 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml > > > @@ -0,0 +1,161 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Qualcomm Core Power Reduction (CPR) bindings > > > + > > > +maintainers: > > > + - Niklas Cassel <nks@flawful.org> > > > + > > > +description: | > > > + CPR (Core Power Reduction) is a technology to reduce core power on a CPU > > > + or other device. Each OPP of a device corresponds to a "corner" that has > > > + a range of valid voltages for a particular frequency. While the device is > > > + running at a particular frequency, CPR monitors dynamic factors such as > > > + temperature, etc. and suggests adjustments to the voltage to save power > > > + and meet silicon characteristic requirements. > > > + > > > +properties: > > > + compatible: > > > + allOf: > > > > Don't need allOf with only 1 entry. > > I get this from dt_binding_check without it: > > Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml: properties:compatible: [{'items': [{'enum': ['qcom,qcs404-cpr']}, {'const': 'qcom,cpr'}]}] is not of type 'object', 'boolean' Because you made 'compatible' a list rather than a dict/object. 'allOf' is a list of subschemas though. Rob
diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt b/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt deleted file mode 100644 index ab0d5ebbad4e..000000000000 --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.txt +++ /dev/null @@ -1,130 +0,0 @@ -QCOM CPR (Core Power Reduction) - -CPR (Core Power Reduction) is a technology to reduce core power on a CPU -or other device. Each OPP of a device corresponds to a "corner" that has -a range of valid voltages for a particular frequency. While the device is -running at a particular frequency, CPR monitors dynamic factors such as -temperature, etc. and suggests adjustments to the voltage to save power -and meet silicon characteristic requirements. - -- compatible: - Usage: required - Value type: <string> - Definition: should be "qcom,qcs404-cpr", "qcom,cpr" for qcs404 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: base address and size of the rbcpr register region - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the CPR interrupt - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: phandle to the reference clock - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: must be "ref" - -- vdd-apc-supply: - Usage: required - Value type: <phandle> - Definition: phandle to the vdd-apc-supply regulator - -- #power-domain-cells: - Usage: required - Value type: <u32> - Definition: should be 0 - -- operating-points-v2: - Usage: required - Value type: <phandle> - Definition: A phandle to the OPP table containing the - performance states supported by the CPR - power domain - -- acc-syscon: - Usage: optional - Value type: <phandle> - Definition: phandle to syscon for writing ACC settings - -- nvmem-cells: - Usage: required - Value type: <phandle> - Definition: phandle to nvmem cells containing the data - that makes up a fuse corner, for each fuse corner. - As well as the CPR fuse revision. - -- nvmem-cell-names: - Usage: required - Value type: <stringlist> - Definition: should be "cpr_quotient_offset1", "cpr_quotient_offset2", - "cpr_quotient_offset3", "cpr_init_voltage1", - "cpr_init_voltage2", "cpr_init_voltage3", "cpr_quotient1", - "cpr_quotient2", "cpr_quotient3", "cpr_ring_osc1", - "cpr_ring_osc2", "cpr_ring_osc3", "cpr_fuse_revision" - for qcs404. - -Example: - - cpr_opp_table: cpr-opp-table { - compatible = "operating-points-v2-qcom-level"; - - cpr_opp1: opp1 { - opp-level = <1>; - qcom,opp-fuse-level = <1>; - }; - cpr_opp2: opp2 { - opp-level = <2>; - qcom,opp-fuse-level = <2>; - }; - cpr_opp3: opp3 { - opp-level = <3>; - qcom,opp-fuse-level = <3>; - }; - }; - - power-controller@b018000 { - compatible = "qcom,qcs404-cpr", "qcom,cpr"; - reg = <0x0b018000 0x1000>; - interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; - clocks = <&xo_board>; - clock-names = "ref"; - vdd-apc-supply = <&pms405_s3>; - #power-domain-cells = <0>; - operating-points-v2 = <&cpr_opp_table>; - acc-syscon = <&tcsr>; - - nvmem-cells = <&cpr_efuse_quot_offset1>, - <&cpr_efuse_quot_offset2>, - <&cpr_efuse_quot_offset3>, - <&cpr_efuse_init_voltage1>, - <&cpr_efuse_init_voltage2>, - <&cpr_efuse_init_voltage3>, - <&cpr_efuse_quot1>, - <&cpr_efuse_quot2>, - <&cpr_efuse_quot3>, - <&cpr_efuse_ring1>, - <&cpr_efuse_ring2>, - <&cpr_efuse_ring3>, - <&cpr_efuse_revision>; - nvmem-cell-names = "cpr_quotient_offset1", - "cpr_quotient_offset2", - "cpr_quotient_offset3", - "cpr_init_voltage1", - "cpr_init_voltage2", - "cpr_init_voltage3", - "cpr_quotient1", - "cpr_quotient2", - "cpr_quotient3", - "cpr_ring_osc1", - "cpr_ring_osc2", - "cpr_ring_osc3", - "cpr_fuse_revision"; - }; diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml new file mode 100644 index 000000000000..852eb36eea93 --- /dev/null +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/avs/qcom,cpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Core Power Reduction (CPR) bindings + +maintainers: + - Niklas Cassel <nks@flawful.org> + +description: | + CPR (Core Power Reduction) is a technology to reduce core power on a CPU + or other device. Each OPP of a device corresponds to a "corner" that has + a range of valid voltages for a particular frequency. While the device is + running at a particular frequency, CPR monitors dynamic factors such as + temperature, etc. and suggests adjustments to the voltage to save power + and meet silicon characteristic requirements. + +properties: + compatible: + allOf: + - items: + - enum: + - qcom,qcs404-cpr + - const: qcom,cpr + + reg: + description: Base address and size of the RBCPR register region. + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Reference clock. + + clock-names: + items: + - const: ref + + vdd-apc-supply: + description: APC regulator supply. + + '#power-domain-cells': + const: 0 + + operating-points-v2: + description: | + A phandle to the OPP table containing the performance states + supported by the CPR power domain. + + acc-syscon: + description: A phandle to the syscon used for writing ACC settings. + + nvmem-cells: + items: + - description: Corner 1 quotient offset + - description: Corner 2 quotient offset + - description: Corner 3 quotient offset + - description: Corner 1 initial voltage + - description: Corner 2 initial voltage + - description: Corner 3 initial voltage + - description: Corner 1 quotient + - description: Corner 2 quotient + - description: Corner 3 quotient + - description: Corner 1 ring oscillator + - description: Corner 2 ring oscillator + - description: Corner 3 ring oscillator + - description: Fuse revision + + nvmem-cell-names: + items: + - const: cpr_quotient_offset1 + - const: cpr_quotient_offset2 + - const: cpr_quotient_offset3 + - const: cpr_init_voltage1 + - const: cpr_init_voltage2 + - const: cpr_init_voltage3 + - const: cpr_quotient1 + - const: cpr_quotient2 + - const: cpr_quotient3 + - const: cpr_ring_osc1 + - const: cpr_ring_osc2 + - const: cpr_ring_osc3 + - const: cpr_fuse_revision + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vdd-apc-supply + - '#power-domain-cells' + - operating-points-v2 + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + + power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index a7d86182fa6b..9ebbccb0494e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15746,7 +15746,7 @@ M: Niklas Cassel <nks@flawful.org> L: linux-pm@vger.kernel.org L: linux-arm-msm@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/power/avs/qcom,cpr.txt +F: Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml F: drivers/soc/qcom/cpr.c QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
Convert qcom,cpr.txt to DT schema format. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> --- .../bindings/power/avs/qcom,cpr.txt | 130 -------------- .../bindings/power/avs/qcom,cpr.yaml | 161 ++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 162 insertions(+), 131 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.txt create mode 100644 Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml