From patchwork Tue Jan 11 17:50:17 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 12710215 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4E5E5C433FE for ; Tue, 11 Jan 2022 17:51:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1344897AbiAKRvT (ORCPT ); Tue, 11 Jan 2022 12:51:19 -0500 Received: from smtp-relay-internal-1.canonical.com ([185.125.188.123]:33076 "EHLO smtp-relay-internal-1.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1344770AbiAKRvF (ORCPT ); Tue, 11 Jan 2022 12:51:05 -0500 Received: from mail-ed1-f70.google.com (mail-ed1-f70.google.com [209.85.208.70]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by smtp-relay-internal-1.canonical.com (Postfix) with ESMTPS id EF4B03F198 for ; Tue, 11 Jan 2022 17:51:03 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=canonical.com; s=20210705; t=1641923463; bh=j6uZDel7K615FhQ3acPPw5TtgkYoagK9b4lklXpsWps=; h=From:To:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=LPfQqWw3A5gyyncEvropGL307WPKyurGm31oEbwQN351Z3gVURcWbrbMmVcra+36/ xBb46LZZxYvnPFa6oyRvcfF9zlnypiNRS8hEE/kU60qLCdPAHDm0O7y9qZOEdJ66TV aRu7tpHeQNqpvWOWxvwusPuXO4CLPkUxH7XCRZbOHK4koQeObfQOY2yN2tK1Jd8y2l D39myVnPPWP5nUNaw43oqPtLspKIWSCMPJSKguuun+fw7UCQOQCpslrAuo0B6anrRd fq5zMOBNkFH4lokUIPerkh2HPWk+y7mhszxCIN0Tbdd5dXJ4btHVkc1R9LtZn+OY+W FcaHwpUfMCzvw== Received: by mail-ed1-f70.google.com with SMTP id g11-20020a056402090b00b003f8fd1ac475so14011594edz.1 for ; Tue, 11 Jan 2022 09:51:03 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=j6uZDel7K615FhQ3acPPw5TtgkYoagK9b4lklXpsWps=; b=m/VFuGWCZW/fftixgLj4Rh+Ogx0mWQ0XJmi/LNVXdWe+T7tublK0k1sqOynAk3d/Rq mGboOU8VooGqcPlOQxhrw0ROTxoIt5w46/1Gy8tuviOB4xe1U5g0j2ghUTlGOyYzdnW4 jm88rV+mYlYLHd/QxUKCm9m9rytVUWiAsMe4tMsOwTJ0YEvfrgDZUJERyuXgcruMNcEk Pf4nNlSTgQNJaE0jYxbstpEXyGxeEz25U+j5XAtS9Fk8sReta1Jy7jyp5QdVewDuT4Fl UfZveDc16JmzP51qN5ONAy4vdG34RspPWks1umxeyEm/lje3KOQ5zK567YSEfGln3BHg ZwYw== X-Gm-Message-State: AOAM533bYhA8yYvcokub8M1rCqbfJkY8DnWCFIpNZAonbfjSmB4zIoGq +ySUofMkKg9qIeKKuEEst9CrAWKvQbR2Qeoh43tge7ikJeCtdV0S2o0VUBBDO8ziq51QdR05oXo MOuwG+VjceZg8XzYGn4mDJLsroYIb6NMNslES X-Received: by 2002:a17:906:9c82:: with SMTP id fj2mr4415016ejc.699.1641923463397; Tue, 11 Jan 2022 09:51:03 -0800 (PST) X-Google-Smtp-Source: ABdhPJy6sxjwCsNV7pjYkWCmE4jQTr4JH/59BHwUL74BTu3PUEEOxC5/W5dprVsiN23jn3BDA8+oaw== X-Received: by 2002:a17:906:9c82:: with SMTP id fj2mr4414989ejc.699.1641923463063; Tue, 11 Jan 2022 09:51:03 -0800 (PST) Received: from localhost.localdomain (xdsl-188-155-168-84.adslplus.ch. [188.155.168.84]) by smtp.gmail.com with ESMTPSA id p25sm5265160edw.75.2022.01.11.09.51.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 11 Jan 2022 09:51:02 -0800 (PST) From: Krzysztof Kozlowski To: Chanwoo Choi , Krzysztof Kozlowski , Pavel Machek , Rob Herring , Lee Jones , Sebastian Reichel , Liam Girdwood , Mark Brown , linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org Subject: [PATCH v2 4/4] dt-bindings: mfd: maxim,max77693: convert to dtschema Date: Tue, 11 Jan 2022 18:50:17 +0100 Message-Id: <20220111175017.223966-5-krzysztof.kozlowski@canonical.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220111175017.223966-1-krzysztof.kozlowski@canonical.com> References: <20220111175017.223966-1-krzysztof.kozlowski@canonical.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Convert the MFD part of Maxim MAX77693 MUIC to DT schema format. The example DTS was copied from existing DTS (exynos4412-midas.dtsi), so keep the license as GPL-2.0-only. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring --- .../devicetree/bindings/mfd/max77693.txt | 194 ------------------ .../bindings/mfd/maxim,max77693.yaml | 143 +++++++++++++ MAINTAINERS | 2 +- 3 files changed, 144 insertions(+), 195 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/max77693.txt create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77693.yaml diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 1032df14498b..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = ; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..906101197e11 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = ; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index ead08768fb78..e5f2758531bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11692,9 +11692,9 @@ M: Bartlomiej Zolnierkiewicz L: linux-kernel@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/*/maxim,max77686.yaml +F: Documentation/devicetree/bindings/*/maxim,max77693.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt F: Documentation/devicetree/bindings/mfd/max14577.txt -F: Documentation/devicetree/bindings/mfd/max77693.txt F: drivers/*/max14577*.c F: drivers/*/max77686*.c F: drivers/*/max77693*.c