[1/3] cpufreq: amd-pstate: Expose struct amd_cpudata

Commit Message

Meng, Li (Jassmine) March 23, 2022, 7:15 a.m. UTC

Expose struct amd_cpudata to AMD P-State unit test module.

This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some AMD P-State
infomations by this data struct. For example: highest perf, nominal
perf, boost supported etc.

Signed-off-by: Meng Li <[e-mail]>
---
 drivers/cpufreq/amd-pstate.c | 60 +----------------------------
 include/linux/amd-pstate.h   | 74 ++++++++++++++++++++++++++++++++++++
 2 files changed, 75 insertions(+), 59 deletions(-)
 create mode 100644 include/linux/amd-pstate.h

Patch

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 7be38bc6a673..5f7a00a64f76 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -36,6 +36,7 @@ 
 #include <linux/delay.h>
 #include <linux/uaccess.h>
 #include <linux/static_call.h>
+#include <linux/amd-pstate.h>
 
 #include <acpi/processor.h>
 #include <acpi/cppc_acpi.h>
@@ -65,65 +66,6 @@  MODULE_PARM_DESC(shared_mem,
 
 static struct cpufreq_driver amd_pstate_driver;
 
-/**
- * struct  amd_aperf_mperf
- * @aperf: actual performance frequency clock count
- * @mperf: maximum performance frequency clock count
- * @tsc:   time stamp counter
- */
-struct amd_aperf_mperf {
-	u64 aperf;
-	u64 mperf;
-	u64 tsc;
-};
-
-/**
- * struct amd_cpudata - private CPU data for AMD P-State
- * @cpu: CPU number
- * @req: constraint request to apply
- * @cppc_req_cached: cached performance request hints
- * @highest_perf: the maximum performance an individual processor may reach,
- *		  assuming ideal conditions
- * @nominal_perf: the maximum sustained performance level of the processor,
- *		  assuming ideal operating conditions
- * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
- *			   savings are achieved
- * @lowest_perf: the absolute lowest performance level of the processor
- * @max_freq: the frequency that mapped to highest_perf
- * @min_freq: the frequency that mapped to lowest_perf
- * @nominal_freq: the frequency that mapped to nominal_perf
- * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
- * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
- * @prev: Last Aperf/Mperf/tsc count value read from register
- * @freq: current cpu frequency value
- * @boost_supported: check whether the Processor or SBIOS supports boost mode
- *
- * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
- * represents all the attributes and goals that AMD P-State requests at runtime.
- */
-struct amd_cpudata {
-	int	cpu;
-
-	struct	freq_qos_request req[2];
-	u64	cppc_req_cached;
-
-	u32	highest_perf;
-	u32	nominal_perf;
-	u32	lowest_nonlinear_perf;
-	u32	lowest_perf;
-
-	u32	max_freq;
-	u32	min_freq;
-	u32	nominal_freq;
-	u32	lowest_nonlinear_freq;
-
-	struct amd_aperf_mperf cur;
-	struct amd_aperf_mperf prev;
-
-	u64 freq;
-	bool	boost_supported;
-};
-
 static inline int pstate_enable(bool enable)
 {
 	return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable);
diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h
new file mode 100644
index 000000000000..790b04c9000b
--- /dev/null
+++ b/include/linux/amd-pstate.h
@@ -0,0 +1,74 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/include/linux/amd-pstate.h
+ *
+ * Copyright (C) 2007-2010 Advanced Micro Devices, Inc.
+ * Author: Meng Li <[e-mail]>
+ */
+#ifndef _LINUX_AMD_PSTATE_H
+#define _LINUX_AMD_PSTATE_H
+
+#include <linux/pm_qos.h>
+/*********************************************************************
+ *                        AMD P-state INTERFACE                       *
+ *********************************************************************/
+/**
+ * struct  amd_aperf_mperf
+ * @aperf: actual performance frequency clock count
+ * @mperf: maximum performance frequency clock count
+ * @tsc:   time stamp counter
+ */
+struct amd_aperf_mperf {
+	u64 aperf;
+	u64 mperf;
+	u64 tsc;
+};
+
+/**
+ * struct amd_cpudata - private CPU data for AMD P-State
+ * @cpu: CPU number
+ * @req: constraint request to apply
+ * @cppc_req_cached: cached performance request hints
+ * @highest_perf: the maximum performance an individual processor may reach,
+ *		  assuming ideal conditions
+ * @nominal_perf: the maximum sustained performance level of the processor,
+ *		  assuming ideal operating conditions
+ * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power
+ *			   savings are achieved
+ * @lowest_perf: the absolute lowest performance level of the processor
+ * @max_freq: the frequency that mapped to highest_perf
+ * @min_freq: the frequency that mapped to lowest_perf
+ * @nominal_freq: the frequency that mapped to nominal_perf
+ * @lowest_nonlinear_freq: the frequency that mapped to lowest_nonlinear_perf
+ * @cur: Difference of Aperf/Mperf/tsc count between last and current sample
+ * @prev: Last Aperf/Mperf/tsc count value read from register
+ * @freq: current cpu frequency value
+ * @boost_supported: check whether the Processor or SBIOS supports boost mode
+ *
+ * The amd_cpudata is key private data for each CPU thread in AMD P-State, and
+ * represents all the attributes and goals that AMD P-State requests at runtime.
+ */
+struct amd_cpudata {
+	int	cpu;
+
+	struct	freq_qos_request req[2];
+	u64	cppc_req_cached;
+
+	u32	highest_perf;
+	u32	nominal_perf;
+	u32	lowest_nonlinear_perf;
+	u32	lowest_perf;
+
+	u32	max_freq;
+	u32	min_freq;
+	u32	nominal_freq;
+	u32	lowest_nonlinear_freq;
+
+	struct amd_aperf_mperf cur;
+	struct amd_aperf_mperf prev;
+
+	u64	freq;
+	bool	boost_supported;
+};
+
+#endif /* _LINUX_AMD_PSTATE_H */