diff mbox series

RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE

Message ID 20220409225317.14332-1-rdunlap@infradead.org (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series RISC-V: cpuidle: fix Kconfig select for RISCV_SBI_CPUIDLE | expand

Commit Message

Randy Dunlap April 9, 2022, 10:53 p.m. UTC
There can be lots of build errors when building cpuidle-riscv-sbi.o.
They are all caused by a kconfig problem with this warning:

WARNING: unmet direct dependencies detected for RISCV_SBI_CPUIDLE
  Depends on [n]: CPU_IDLE [=y] && RISCV [=y] && RISCV_SBI [=n]
  Selected by [y]:
  - SOC_VIRT [=y] && CPU_IDLE [=y]

so make the 'select' of RISCV_SBI_CPUIDLE also depend on RISCV_SBI.

Fixes: c5179ef1ca0c ("RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
---
 arch/riscv/Kconfig.socs |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Anup Patel April 10, 2022, 3:14 a.m. UTC | #1
On Sun, Apr 10, 2022 at 4:23 AM Randy Dunlap <rdunlap@infradead.org> wrote:
>
> There can be lots of build errors when building cpuidle-riscv-sbi.o.
> They are all caused by a kconfig problem with this warning:
>
> WARNING: unmet direct dependencies detected for RISCV_SBI_CPUIDLE
>   Depends on [n]: CPU_IDLE [=y] && RISCV [=y] && RISCV_SBI [=n]
>   Selected by [y]:
>   - SOC_VIRT [=y] && CPU_IDLE [=y]
>
> so make the 'select' of RISCV_SBI_CPUIDLE also depend on RISCV_SBI.
>
> Fixes: c5179ef1ca0c ("RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Reported-by: kernel test robot <lkp@intel.com>
> Cc: Anup Patel <anup.patel@wdc.com>
> Cc: Anup Patel <apatel@ventanamicro.com>
> Cc: Anup Patel <anup@brainfault.org>
> Cc: Palmer Dabbelt <palmer@rivosinc.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>

Looks good to me.

Reviewed-by: Anup Patel <anup@brainfault.org>

Regards,
Anup

> ---
>  arch/riscv/Kconfig.socs |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -38,7 +38,7 @@ config SOC_VIRT
>         select SIFIVE_PLIC
>         select PM_GENERIC_DOMAINS if PM
>         select PM_GENERIC_DOMAINS_OF if PM && OF
> -       select RISCV_SBI_CPUIDLE if CPU_IDLE
> +       select RISCV_SBI_CPUIDLE if CPU_IDLE && RISCV_SBI
>         help
>           This enables support for QEMU Virt Machine.
>
Palmer Dabbelt April 21, 2022, 10:28 p.m. UTC | #2
On Sat, 09 Apr 2022 15:53:17 PDT (-0700), rdunlap@infradead.org wrote:
> There can be lots of build errors when building cpuidle-riscv-sbi.o.
> They are all caused by a kconfig problem with this warning:
>
> WARNING: unmet direct dependencies detected for RISCV_SBI_CPUIDLE
>   Depends on [n]: CPU_IDLE [=y] && RISCV [=y] && RISCV_SBI [=n]
>   Selected by [y]:
>   - SOC_VIRT [=y] && CPU_IDLE [=y]
>
> so make the 'select' of RISCV_SBI_CPUIDLE also depend on RISCV_SBI.
>
> Fixes: c5179ef1ca0c ("RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine")
> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> Reported-by: kernel test robot <lkp@intel.com>
> Cc: Anup Patel <anup.patel@wdc.com>
> Cc: Anup Patel <apatel@ventanamicro.com>
> Cc: Anup Patel <anup@brainfault.org>
> Cc: Palmer Dabbelt <palmer@rivosinc.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-riscv@lists.infradead.org
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Palmer Dabbelt <palmer@dabbelt.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>
> ---
>  arch/riscv/Kconfig.socs |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -38,7 +38,7 @@ config SOC_VIRT
>  	select SIFIVE_PLIC
>  	select PM_GENERIC_DOMAINS if PM
>  	select PM_GENERIC_DOMAINS_OF if PM && OF
> -	select RISCV_SBI_CPUIDLE if CPU_IDLE
> +	select RISCV_SBI_CPUIDLE if CPU_IDLE && RISCV_SBI
>  	help
>  	  This enables support for QEMU Virt Machine.

Sorry to be slow here, I seem to remember having written this before but 
I must have just gotted pulled into something else.

IMO the real bug here is that Kconfig.socs is poorly designed: I 
misunderstood how select works at the time, we should really clean all 
this up (or maybe just remove it entirely?) so we don't have to 
duplicate all these dependencies.

That's a bigger project, though so this is on fixes -- it's way better 
to have the build work.

Thanks!
diff mbox series

Patch

--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -38,7 +38,7 @@  config SOC_VIRT
 	select SIFIVE_PLIC
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
-	select RISCV_SBI_CPUIDLE if CPU_IDLE
+	select RISCV_SBI_CPUIDLE if CPU_IDLE && RISCV_SBI
 	help
 	  This enables support for QEMU Virt Machine.