| Message ID | 20220523172757.2351052-1-srinivas.pandruvada@linux.intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Documentation: admin-guide: pm: Add Out of Band mode | expand |
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> writes: > Update documentation for using the tool to support performance level > change via OOB (Out of Band) interface. > > Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> > --- > .../admin-guide/pm/intel-speed-select.rst | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > > diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst > index 0a1fbdb54bfe..4146a2da35ea 100644 > --- a/Documentation/admin-guide/pm/intel-speed-select.rst > +++ b/Documentation/admin-guide/pm/intel-speed-select.rst > @@ -262,6 +262,25 @@ Which shows that the base frequency now increased from 2600 MHz at performance > level 0 to 2800 MHz at performance level 4. As a result, any workload, which can > use fewer CPUs, can see a boost of 200 MHz compared to performance level 0. > > +Changing performance level via BMC Interface > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > + > +It is possible to change SST-PP level using out of band (OOB) agent (Via some > +remote management console, through BMC "Baseboard Management Controller" > +interface). This mode is supported from the Sapphire Rapids processor > +generation. The kernel and tool change to support this mode is added to Linux > +kernel version 5.18. To enable this feature, kernel config > +"CONFIG_INTEL_HFI_THERMAL" is required. The minimum version of the tool > +is "v1.12" to support this feature, which is part of Linux kernel version 5.18. > + > +To support such configuration, this tool can be used as a daemon. Add > +a command line option --oob:: > + > +# intel-speed-select --oob > + This suggests you haven't actually built the documentation with your change and verified that you got the result you were after. Literal blocks need to be indented. Thanks, jon
On Mon, 2022-05-23 at 11:46 -0600, Jonathan Corbet wrote: > Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> writes: > > > Update documentation for using the tool to support performance > > level > > change via OOB (Out of Band) interface. > > > > Signed-off-by: Srinivas Pandruvada > > <srinivas.pandruvada@linux.intel.com> > > --- > > .../admin-guide/pm/intel-speed-select.rst | 19 > > +++++++++++++++++++ > > 1 file changed, 19 insertions(+) > > > > diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst > > b/Documentation/admin-guide/pm/intel-speed-select.rst > > index 0a1fbdb54bfe..4146a2da35ea 100644 > > --- a/Documentation/admin-guide/pm/intel-speed-select.rst > > +++ b/Documentation/admin-guide/pm/intel-speed-select.rst > > @@ -262,6 +262,25 @@ Which shows that the base frequency now > > increased from 2600 MHz at performance > > level 0 to 2800 MHz at performance level 4. As a result, any > > workload, which can > > use fewer CPUs, can see a boost of 200 MHz compared to performance > > level 0. > > > > +Changing performance level via BMC Interface > > +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > + > > +It is possible to change SST-PP level using out of band (OOB) > > agent (Via some > > +remote management console, through BMC "Baseboard Management > > Controller" > > +interface). This mode is supported from the Sapphire Rapids > > processor > > +generation. The kernel and tool change to support this mode is > > added to Linux > > +kernel version 5.18. To enable this feature, kernel config > > +"CONFIG_INTEL_HFI_THERMAL" is required. The minimum version of the > > tool > > +is "v1.12" to support this feature, which is part of Linux kernel > > version 5.18. > > + > > +To support such configuration, this tool can be used as a daemon. > > Add > > +a command line option --oob:: > > + > > +# intel-speed-select --oob > > + > > This suggests you haven't actually built the documentation with your > change and verified that you got the result you were after. You mean I should print the result with the command? Something like this: #intel-speed-select --oob Intel(R) Speed Select Technology OOB mode is enabled and will run as daemon > Literal > blocks need to be indented. I will submit v2. Thanks, Srinivas > > Thanks, > > jon
srinivas pandruvada <srinivas.pandruvada@linux.intel.com> writes: >> This suggests you haven't actually built the documentation with your >> change and verified that you got the result you were after. > You mean I should print the result with the command? Something like > this: > #intel-speed-select --oob > Intel(R) Speed Select Technology > OOB mode is enabled and will run as daemon No, I meant building the docs and verifying that they looked right. That said, adding the output seems fine... Thanks, jon
diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst index 0a1fbdb54bfe..4146a2da35ea 100644 --- a/Documentation/admin-guide/pm/intel-speed-select.rst +++ b/Documentation/admin-guide/pm/intel-speed-select.rst @@ -262,6 +262,25 @@ Which shows that the base frequency now increased from 2600 MHz at performance level 0 to 2800 MHz at performance level 4. As a result, any workload, which can use fewer CPUs, can see a boost of 200 MHz compared to performance level 0. +Changing performance level via BMC Interface +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It is possible to change SST-PP level using out of band (OOB) agent (Via some +remote management console, through BMC "Baseboard Management Controller" +interface). This mode is supported from the Sapphire Rapids processor +generation. The kernel and tool change to support this mode is added to Linux +kernel version 5.18. To enable this feature, kernel config +"CONFIG_INTEL_HFI_THERMAL" is required. The minimum version of the tool +is "v1.12" to support this feature, which is part of Linux kernel version 5.18. + +To support such configuration, this tool can be used as a daemon. Add +a command line option --oob:: + +# intel-speed-select --oob + +In this mode the tool will online/offline CPUs based on the new performance +level. + Check presence of other Intel(R) SST features ---------------------------------------------
Update documentation for using the tool to support performance level change via OOB (Out of Band) interface. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> --- .../admin-guide/pm/intel-speed-select.rst | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)