| Message ID | 20220527110036.8810-3-johnson.wang@mediatek.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Chanwoo Choi |
| Headers | show |
| Series | Introduce MediaTek CCI devfreq driver | expand |
Il 27/05/22 13:00, Johnson Wang ha scritto: > We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect > (CCI) used by some MediaTek SoCs. > > In this driver, we use the passive devfreq driver to get target frequencies > and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI > is supplied by the same regulators with the little core CPUs. > > Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> > Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> > --- > This patch depends on "devfreq-testing"[1]. > [1]https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git/log/?h=devfreq-testing > --- > drivers/devfreq/Kconfig | 10 + > drivers/devfreq/Makefile | 1 + > drivers/devfreq/mtk-cci-devfreq.c | 441 ++++++++++++++++++++++++++++++ > 3 files changed, 452 insertions(+) > create mode 100644 drivers/devfreq/mtk-cci-devfreq.c > > diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig > index 87eb2b837e68..9754d8b31621 100644 > --- a/drivers/devfreq/Kconfig > +++ b/drivers/devfreq/Kconfig > @@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ > It reads ACTMON counters of memory controllers and adjusts the > operating frequencies and voltages with OPP support. > > +config ARM_MEDIATEK_CCI_DEVFREQ > + tristate "MEDIATEK CCI DEVFREQ Driver" > + depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST > + select DEVFREQ_GOV_PASSIVE > + help > + This adds a devfreq driver for MediaTek Cache Coherent Interconnect > + which is shared the same regulators with the cpu cluster. It can track > + buck voltages and update a proper CCI frequency. Use the notification > + to get the regulator status. > + > config ARM_RK3399_DMC_DEVFREQ > tristate "ARM RK3399 DMC DEVFREQ Driver" > depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \ > diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile > index 0b6be92a25d9..bf40d04928d0 100644 > --- a/drivers/devfreq/Makefile > +++ b/drivers/devfreq/Makefile > @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o > obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o > obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx-bus.o > obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o > +obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) += mtk-cci-devfreq.o > obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o > obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o > obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o > diff --git a/drivers/devfreq/mtk-cci-devfreq.c b/drivers/devfreq/mtk-cci-devfreq.c > new file mode 100644 > index 000000000000..df42da35b312 > --- /dev/null > +++ b/drivers/devfreq/mtk-cci-devfreq.c > @@ -0,0 +1,441 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (C) 2022 MediaTek Inc. > + */ > + ..snip.. > +}; > + > +static int mtk_ccifreq_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct mtk_ccifreq_drv *drv; > + struct devfreq_passive_data *passive_data; > + struct dev_pm_opp *opp; > + unsigned long rate, opp_volt; > + int ret; > + > + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > + if (!drv) > + return -ENOMEM; > + > + drv->dev = dev; > + drv->soc_data = (const struct mtk_ccifreq_platform_data *) > + of_device_get_match_data(&pdev->dev); > + mutex_init(&drv->reg_lock); > + platform_set_drvdata(pdev, drv); > + > + drv->cci_clk = devm_clk_get(dev, "cci"); > + if (IS_ERR(drv->cci_clk)) { > + ret = PTR_ERR(drv->cci_clk); > + return dev_err_probe(dev, ret, > + "failed to get cci clk: %d\n", ret); > + } > + > + drv->inter_clk = devm_clk_get(dev, "intermediate"); > + if (IS_ERR(drv->inter_clk)) { > + ret = PTR_ERR(drv->inter_clk); > + return dev_err_probe(dev, ret, > + "failed to get intermediate clk: %d\n", ret); > + } > + > + drv->proc_reg = devm_regulator_get_optional(dev, "proc"); In the devicetree binding for this driver, the "proc" regulator is *not* optional, but here you're using devm_regulator_get_optional. If this is not optional, you should use devm_regulator_get() instead. > + if (IS_ERR(drv->proc_reg)) { > + ret = PTR_ERR(drv->proc_reg); > + return dev_err_probe(dev, ret, > + "failed to get proc regulator: %d\n", ret); There's no need to print ret... dev_err_probe() takes care of that for you already: in this case, you're printing the value of ret twice. > + } > + > + ret = regulator_enable(drv->proc_reg); If you move this call after the devm_regulator_get_optional() call for the sram vreg, you will be able to use dev_err_probe for the latter as well. > + if (ret) { > + dev_err(dev, "failed to enable proc regulator\n"); Why aren't you using dev_err_probe here, like you've done for the other instances? > + return ret; > + } > + > + drv->sram_reg = devm_regulator_get_optional(dev, "sram"); > + if (IS_ERR(drv->sram_reg)) > + drv->sram_reg = NULL; When you use regulator_get_optional() (including the devm_ variant of it), you shall return an error, if there's any... that's what the _optional() is for. if (IS_ERR(drv->sram_reg)) return dev_err_probe(dev, PTR_ERR(drv->proc_reg), "failed to get sram regulator"); > + else { > + ret = regulator_enable(drv->sram_reg); > + if (ret) { > + dev_err(dev, "failed to enable sram regulator\n"); > + goto out_free_resources; > + } > + } > + Regards, Angelo
On Mon, 2022-05-30 at 14:16 +0200, AngeloGioacchino Del Regno wrote: > Il 27/05/22 13:00, Johnson Wang ha scritto: > > We introduce a devfreq driver for the MediaTek Cache Coherent > > Interconnect > > (CCI) used by some MediaTek SoCs. > > > > In this driver, we use the passive devfreq driver to get target > > frequencies > > and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek > > CCI > > is supplied by the same regulators with the little core CPUs. > > > > Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> > > Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> > > Acked-by: Chanwoo Choi <cw00.choi@samsung.com> > > --- > > This patch depends on "devfreq-testing"[1]. > > [1] > > https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git/log/?h=devfreq-testing__;!!CTRNKA9wMg0ARbw!2ldxtrMmK2WJP8_r1DcJRm0XQOSZQJfbI5DlNDPEfz84Ble0R7pSP7PbYLreNgVGRyFfDQ$ > > > > --- > > drivers/devfreq/Kconfig | 10 + > > drivers/devfreq/Makefile | 1 + > > drivers/devfreq/mtk-cci-devfreq.c | 441 > > ++++++++++++++++++++++++++++++ > > 3 files changed, 452 insertions(+) > > create mode 100644 drivers/devfreq/mtk-cci-devfreq.c > > > > diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig > > index 87eb2b837e68..9754d8b31621 100644 > > --- a/drivers/devfreq/Kconfig > > +++ b/drivers/devfreq/Kconfig > > @@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ > > It reads ACTMON counters of memory controllers and adjusts > > the > > operating frequencies and voltages with OPP support. > > > > +config ARM_MEDIATEK_CCI_DEVFREQ > > + tristate "MEDIATEK CCI DEVFREQ Driver" > > + depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST > > + select DEVFREQ_GOV_PASSIVE > > + help > > + This adds a devfreq driver for MediaTek Cache Coherent > > Interconnect > > + which is shared the same regulators with the cpu cluster. It > > can track > > + buck voltages and update a proper CCI frequency. Use the > > notification > > + to get the regulator status. > > + > > config ARM_RK3399_DMC_DEVFREQ > > tristate "ARM RK3399 DMC DEVFREQ Driver" > > depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \ > > diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile > > index 0b6be92a25d9..bf40d04928d0 100644 > > --- a/drivers/devfreq/Makefile > > +++ b/drivers/devfreq/Makefile > > @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += > > governor_passive.o > > obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o > > obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx-bus.o > > obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o > > +obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) += mtk-cci-devfreq.o > > obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o > > obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o > > obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o > > diff --git a/drivers/devfreq/mtk-cci-devfreq.c > > b/drivers/devfreq/mtk-cci-devfreq.c > > new file mode 100644 > > index 000000000000..df42da35b312 > > --- /dev/null > > +++ b/drivers/devfreq/mtk-cci-devfreq.c > > @@ -0,0 +1,441 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * Copyright (C) 2022 MediaTek Inc. > > + */ > > + > > ..snip.. > > > +}; > > + > > +static int mtk_ccifreq_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct mtk_ccifreq_drv *drv; > > + struct devfreq_passive_data *passive_data; > > + struct dev_pm_opp *opp; > > + unsigned long rate, opp_volt; > > + int ret; > > + > > + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > > + if (!drv) > > + return -ENOMEM; > > + > > + drv->dev = dev; > > + drv->soc_data = (const struct mtk_ccifreq_platform_data *) > > + of_device_get_match_data(&pdev->dev); > > + mutex_init(&drv->reg_lock); > > + platform_set_drvdata(pdev, drv); > > + > > + drv->cci_clk = devm_clk_get(dev, "cci"); > > + if (IS_ERR(drv->cci_clk)) { > > + ret = PTR_ERR(drv->cci_clk); > > + return dev_err_probe(dev, ret, > > + "failed to get cci clk: %d\n", > > ret); > > + } > > + > > + drv->inter_clk = devm_clk_get(dev, "intermediate"); > > + if (IS_ERR(drv->inter_clk)) { > > + ret = PTR_ERR(drv->inter_clk); > > + return dev_err_probe(dev, ret, > > + "failed to get intermediate clk: > > %d\n", ret); > > + } > > + > > + drv->proc_reg = devm_regulator_get_optional(dev, "proc"); > > In the devicetree binding for this driver, the "proc" regulator is > *not* optional, > but here you're using devm_regulator_get_optional. > > If this is not optional, you should use devm_regulator_get() instead. > Hi Angelo, This is similiar case to mediatek-cpufreq.c [1]. Regulator framework has three variants of APIs for getting regulator handler. We do NOT choose regulator_get_exclusive() because cpufreq and cci share with the same power rail. We choose regulator_get_optional() so that we can handle error if it returns ERR_PTR(-ENODEV) rather than a dummy handler from regulator_get(). Please inform me if I get it wrong. That's what I understand and you can refer to [2]. Thanks. [1]: 20220408045908.21671-4-rex-bc.chen@mediatek.com [2]: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1327385.html > > + if (IS_ERR(drv->proc_reg)) { > > + ret = PTR_ERR(drv->proc_reg); > > + return dev_err_probe(dev, ret, > > + "failed to get proc regulator: > > %d\n", ret); > > There's no need to print ret... dev_err_probe() takes care of that > for you already: > in this case, you're printing the value of ret twice. > > > + } > > + > > + ret = regulator_enable(drv->proc_reg); > > If you move this call after the devm_regulator_get_optional() call > for the sram > vreg, you will be able to use dev_err_probe for the latter as well. > > > + if (ret) { > > + dev_err(dev, "failed to enable proc regulator\n"); > > Why aren't you using dev_err_probe here, like you've done for the > other instances? > > > + return ret; > > + } > > + > > + drv->sram_reg = devm_regulator_get_optional(dev, "sram"); > > + if (IS_ERR(drv->sram_reg)) > > + drv->sram_reg = NULL; > > When you use regulator_get_optional() (including the devm_ variant of > it), you > shall return an error, if there's any... that's what the _optional() > is for. > > if (IS_ERR(drv->sram_reg)) > return dev_err_probe(dev, PTR_ERR(drv->proc_reg), > "failed to get sram regulator"); > > > + else { > > + ret = regulator_enable(drv->sram_reg); > > + if (ret) { > > + dev_err(dev, "failed to enable sram > > regulator\n"); > > + goto out_free_resources; > > + } > > + } > > + > > Regards, > Angelo > >
On 5/30/22 9:16 PM, AngeloGioacchino Del Regno wrote: > Il 27/05/22 13:00, Johnson Wang ha scritto: >> We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect >> (CCI) used by some MediaTek SoCs. >> >> In this driver, we use the passive devfreq driver to get target frequencies >> and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI >> is supplied by the same regulators with the little core CPUs. >> >> Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com> >> Signed-off-by: Johnson Wang <johnson.wang@mediatek.com> >> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> >> --- >> This patch depends on "devfreq-testing"[1]. >> [1]https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git/log/?h=devfreq-testing >> --- >> drivers/devfreq/Kconfig | 10 + >> drivers/devfreq/Makefile | 1 + >> drivers/devfreq/mtk-cci-devfreq.c | 441 ++++++++++++++++++++++++++++++ >> 3 files changed, 452 insertions(+) >> create mode 100644 drivers/devfreq/mtk-cci-devfreq.c >> >> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig >> index 87eb2b837e68..9754d8b31621 100644 >> --- a/drivers/devfreq/Kconfig >> +++ b/drivers/devfreq/Kconfig >> @@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ >> It reads ACTMON counters of memory controllers and adjusts the >> operating frequencies and voltages with OPP support. >> +config ARM_MEDIATEK_CCI_DEVFREQ >> + tristate "MEDIATEK CCI DEVFREQ Driver" >> + depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST >> + select DEVFREQ_GOV_PASSIVE >> + help >> + This adds a devfreq driver for MediaTek Cache Coherent Interconnect >> + which is shared the same regulators with the cpu cluster. It can track >> + buck voltages and update a proper CCI frequency. Use the notification >> + to get the regulator status. >> + >> config ARM_RK3399_DMC_DEVFREQ >> tristate "ARM RK3399 DMC DEVFREQ Driver" >> depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \ >> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile >> index 0b6be92a25d9..bf40d04928d0 100644 >> --- a/drivers/devfreq/Makefile >> +++ b/drivers/devfreq/Makefile >> @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o >> obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o >> obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx-bus.o >> obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o >> +obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) += mtk-cci-devfreq.o >> obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o >> obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o >> obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o >> diff --git a/drivers/devfreq/mtk-cci-devfreq.c b/drivers/devfreq/mtk-cci-devfreq.c >> new file mode 100644 >> index 000000000000..df42da35b312 >> --- /dev/null >> +++ b/drivers/devfreq/mtk-cci-devfreq.c >> @@ -0,0 +1,441 @@ >> +// SPDX-License-Identifier: GPL-2.0-only >> +/* >> + * Copyright (C) 2022 MediaTek Inc. >> + */ >> + > > ..snip.. > >> +}; >> + >> +static int mtk_ccifreq_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct mtk_ccifreq_drv *drv; >> + struct devfreq_passive_data *passive_data; >> + struct dev_pm_opp *opp; >> + unsigned long rate, opp_volt; >> + int ret; >> + >> + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); >> + if (!drv) >> + return -ENOMEM; >> + >> + drv->dev = dev; >> + drv->soc_data = (const struct mtk_ccifreq_platform_data *) >> + of_device_get_match_data(&pdev->dev); >> + mutex_init(&drv->reg_lock); >> + platform_set_drvdata(pdev, drv); >> + >> + drv->cci_clk = devm_clk_get(dev, "cci"); >> + if (IS_ERR(drv->cci_clk)) { >> + ret = PTR_ERR(drv->cci_clk); >> + return dev_err_probe(dev, ret, >> + "failed to get cci clk: %d\n", ret); >> + } >> + >> + drv->inter_clk = devm_clk_get(dev, "intermediate"); >> + if (IS_ERR(drv->inter_clk)) { >> + ret = PTR_ERR(drv->inter_clk); >> + return dev_err_probe(dev, ret, >> + "failed to get intermediate clk: %d\n", ret); >> + } >> + >> + drv->proc_reg = devm_regulator_get_optional(dev, "proc"); > > In the devicetree binding for this driver, the "proc" regulator is *not* optional, > but here you're using devm_regulator_get_optional. > > If this is not optional, you should use devm_regulator_get() instead. > >> + if (IS_ERR(drv->proc_reg)) { >> + ret = PTR_ERR(drv->proc_reg); >> + return dev_err_probe(dev, ret, >> + "failed to get proc regulator: %d\n", ret); > > There's no need to print ret... dev_err_probe() takes care of that for you already: > in this case, you're printing the value of ret twice. > I agree. better to remove the additional 'ret' printing from dev_err_probe. >> + } >> + >> + ret = regulator_enable(drv->proc_reg); > > If you move this call after the devm_regulator_get_optional() call for the sram > vreg, you will be able to use dev_err_probe for the latter as well. > >> + if (ret) { >> + dev_err(dev, "failed to enable proc regulator\n"); > > Why aren't you using dev_err_probe here, like you've done for the other instances? dev_err is enough because it means that get to regulator instance via regulator_get_optional. If error from regulator_enable happen, it depends on the internal logic of pmic driver. > >> + return ret; >> + } >> + >> + drv->sram_reg = devm_regulator_get_optional(dev, "sram"); >> + if (IS_ERR(drv->sram_reg)) >> + drv->sram_reg = NULL; > > When you use regulator_get_optional() (including the devm_ variant of it), you > shall return an error, if there's any... that's what the _optional() is for. > > if (IS_ERR(drv->sram_reg)) > return dev_err_probe(dev, PTR_ERR(drv->proc_reg), > "failed to get sram regulator"); > >> + else { >> + ret = regulator_enable(drv->sram_reg); >> + if (ret) { >> + dev_err(dev, "failed to enable sram regulator\n"); >> + goto out_free_resources; >> + } >> + } >> + > > Regards, > Angelo > Hi Johnson, Thanks for your work. Before merge, better to remove the 'ret' printing from dev_err_probe above. I'll merge it.
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 87eb2b837e68..9754d8b31621 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ It reads ACTMON counters of memory controllers and adjusts the operating frequencies and voltages with OPP support. +config ARM_MEDIATEK_CCI_DEVFREQ + tristate "MEDIATEK CCI DEVFREQ Driver" + depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST + select DEVFREQ_GOV_PASSIVE + help + This adds a devfreq driver for MediaTek Cache Coherent Interconnect + which is shared the same regulators with the cpu cluster. It can track + buck voltages and update a proper CCI frequency. Use the notification + to get the regulator status. + config ARM_RK3399_DMC_DEVFREQ tristate "ARM RK3399 DMC DEVFREQ Driver" depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \ diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile index 0b6be92a25d9..bf40d04928d0 100644 --- a/drivers/devfreq/Makefile +++ b/drivers/devfreq/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ) += imx-bus.o obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ) += imx8m-ddrc.o +obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) += mtk-cci-devfreq.o obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o diff --git a/drivers/devfreq/mtk-cci-devfreq.c b/drivers/devfreq/mtk-cci-devfreq.c new file mode 100644 index 000000000000..df42da35b312 --- /dev/null +++ b/drivers/devfreq/mtk-cci-devfreq.c @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 MediaTek Inc. + */ + +#include <linux/clk.h> +#include <linux/devfreq.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/regulator/consumer.h> + +struct mtk_ccifreq_platform_data { + int min_volt_shift; + int max_volt_shift; + int proc_max_volt; + int sram_min_volt; + int sram_max_volt; +}; + +struct mtk_ccifreq_drv { + struct device *dev; + struct devfreq *devfreq; + struct regulator *proc_reg; + struct regulator *sram_reg; + struct clk *cci_clk; + struct clk *inter_clk; + int inter_voltage; + unsigned long pre_freq; + /* Avoid race condition for regulators between notify and policy */ + struct mutex reg_lock; + struct notifier_block opp_nb; + const struct mtk_ccifreq_platform_data *soc_data; + int vtrack_max; +}; + +static int mtk_ccifreq_set_voltage(struct mtk_ccifreq_drv *drv, int new_voltage) +{ + const struct mtk_ccifreq_platform_data *soc_data = drv->soc_data; + struct device *dev = drv->dev; + int pre_voltage, pre_vsram, new_vsram, vsram, voltage, ret; + int retry_max = drv->vtrack_max; + + if (!drv->sram_reg) { + ret = regulator_set_voltage(drv->proc_reg, new_voltage, + drv->soc_data->proc_max_volt); + return ret; + } + + pre_voltage = regulator_get_voltage(drv->proc_reg); + if (pre_voltage < 0) { + dev_err(dev, "invalid vproc value: %d\n", pre_voltage); + return pre_voltage; + } + + pre_vsram = regulator_get_voltage(drv->sram_reg); + if (pre_vsram < 0) { + dev_err(dev, "invalid vsram value: %d\n", pre_vsram); + return pre_vsram; + } + + new_vsram = clamp(new_voltage + soc_data->min_volt_shift, + soc_data->sram_min_volt, soc_data->sram_max_volt); + + do { + if (pre_voltage <= new_voltage) { + vsram = clamp(pre_voltage + soc_data->max_volt_shift, + soc_data->sram_min_volt, new_vsram); + ret = regulator_set_voltage(drv->sram_reg, vsram, + soc_data->sram_max_volt); + if (ret) + return ret; + + if (vsram == soc_data->sram_max_volt || + new_vsram == soc_data->sram_min_volt) + voltage = new_voltage; + else + voltage = vsram - soc_data->min_volt_shift; + + ret = regulator_set_voltage(drv->proc_reg, voltage, + soc_data->proc_max_volt); + if (ret) { + regulator_set_voltage(drv->sram_reg, pre_vsram, + soc_data->sram_max_volt); + return ret; + } + } else if (pre_voltage > new_voltage) { + voltage = max(new_voltage, + pre_vsram - soc_data->max_volt_shift); + ret = regulator_set_voltage(drv->proc_reg, voltage, + soc_data->proc_max_volt); + if (ret) + return ret; + + if (voltage == new_voltage) + vsram = new_vsram; + else + vsram = max(new_vsram, + voltage + soc_data->min_volt_shift); + + ret = regulator_set_voltage(drv->sram_reg, vsram, + soc_data->sram_max_volt); + if (ret) { + regulator_set_voltage(drv->proc_reg, pre_voltage, + soc_data->proc_max_volt); + return ret; + } + } + + pre_voltage = voltage; + pre_vsram = vsram; + + if (--retry_max < 0) { + dev_err(dev, + "over loop count, failed to set voltage\n"); + return -EINVAL; + } + } while (voltage != new_voltage || vsram != new_vsram); + + return 0; +} + +static int mtk_ccifreq_target(struct device *dev, unsigned long *freq, + u32 flags) +{ + struct mtk_ccifreq_drv *drv = dev_get_drvdata(dev); + struct clk *cci_pll = clk_get_parent(drv->cci_clk); + struct dev_pm_opp *opp; + unsigned long opp_rate; + int voltage, pre_voltage, inter_voltage, target_voltage, ret; + + if (!drv) + return -EINVAL; + + if (drv->pre_freq == *freq) + return 0; + + inter_voltage = drv->inter_voltage; + + opp_rate = *freq; + opp = devfreq_recommended_opp(dev, &opp_rate, 1); + if (IS_ERR(opp)) { + dev_err(dev, "failed to find opp for freq: %ld\n", opp_rate); + return PTR_ERR(opp); + } + + mutex_lock(&drv->reg_lock); + + voltage = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + pre_voltage = regulator_get_voltage(drv->proc_reg); + if (pre_voltage < 0) { + dev_err(dev, "invalid vproc value: %d\n", pre_voltage); + ret = pre_voltage; + goto out_unlock; + } + + /* scale up: set voltage first then freq. */ + target_voltage = max(inter_voltage, voltage); + if (pre_voltage <= target_voltage) { + ret = mtk_ccifreq_set_voltage(drv, target_voltage); + if (ret) { + dev_err(dev, "failed to scale up voltage\n"); + goto out_restore_voltage; + } + } + + /* switch the cci clock to intermediate clock source. */ + ret = clk_set_parent(drv->cci_clk, drv->inter_clk); + if (ret) { + dev_err(dev, "failed to re-parent cci clock\n"); + goto out_restore_voltage; + } + + /* set the original clock to target rate. */ + ret = clk_set_rate(cci_pll, *freq); + if (ret) { + dev_err(dev, "failed to set cci pll rate: %d\n", ret); + clk_set_parent(drv->cci_clk, cci_pll); + goto out_restore_voltage; + } + + /* switch the cci clock back to the original clock source. */ + ret = clk_set_parent(drv->cci_clk, cci_pll); + if (ret) { + dev_err(dev, "failed to re-parent cci clock\n"); + mtk_ccifreq_set_voltage(drv, inter_voltage); + goto out_unlock; + } + + /* + * If the new voltage is lower than the intermediate voltage or the + * original voltage, scale down to the new voltage. + */ + if (voltage < inter_voltage || voltage < pre_voltage) { + ret = mtk_ccifreq_set_voltage(drv, voltage); + if (ret) { + dev_err(dev, "failed to scale down voltage\n"); + goto out_unlock; + } + } + + drv->pre_freq = *freq; + mutex_unlock(&drv->reg_lock); + + return 0; + +out_restore_voltage: + mtk_ccifreq_set_voltage(drv, pre_voltage); + +out_unlock: + mutex_unlock(&drv->reg_lock); + return ret; +} + +static int mtk_ccifreq_opp_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct dev_pm_opp *opp = data; + struct mtk_ccifreq_drv *drv; + unsigned long freq, volt; + + drv = container_of(nb, struct mtk_ccifreq_drv, opp_nb); + + if (event == OPP_EVENT_ADJUST_VOLTAGE) { + freq = dev_pm_opp_get_freq(opp); + + mutex_lock(&drv->reg_lock); + /* current opp item is changed */ + if (freq == drv->pre_freq) { + volt = dev_pm_opp_get_voltage(opp); + mtk_ccifreq_set_voltage(drv, volt); + } + mutex_unlock(&drv->reg_lock); + } + + return 0; +} + +static struct devfreq_dev_profile mtk_ccifreq_profile = { + .target = mtk_ccifreq_target, +}; + +static int mtk_ccifreq_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_ccifreq_drv *drv; + struct devfreq_passive_data *passive_data; + struct dev_pm_opp *opp; + unsigned long rate, opp_volt; + int ret; + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + drv->dev = dev; + drv->soc_data = (const struct mtk_ccifreq_platform_data *) + of_device_get_match_data(&pdev->dev); + mutex_init(&drv->reg_lock); + platform_set_drvdata(pdev, drv); + + drv->cci_clk = devm_clk_get(dev, "cci"); + if (IS_ERR(drv->cci_clk)) { + ret = PTR_ERR(drv->cci_clk); + return dev_err_probe(dev, ret, + "failed to get cci clk: %d\n", ret); + } + + drv->inter_clk = devm_clk_get(dev, "intermediate"); + if (IS_ERR(drv->inter_clk)) { + ret = PTR_ERR(drv->inter_clk); + return dev_err_probe(dev, ret, + "failed to get intermediate clk: %d\n", ret); + } + + drv->proc_reg = devm_regulator_get_optional(dev, "proc"); + if (IS_ERR(drv->proc_reg)) { + ret = PTR_ERR(drv->proc_reg); + return dev_err_probe(dev, ret, + "failed to get proc regulator: %d\n", ret); + } + + ret = regulator_enable(drv->proc_reg); + if (ret) { + dev_err(dev, "failed to enable proc regulator\n"); + return ret; + } + + drv->sram_reg = devm_regulator_get_optional(dev, "sram"); + if (IS_ERR(drv->sram_reg)) + drv->sram_reg = NULL; + else { + ret = regulator_enable(drv->sram_reg); + if (ret) { + dev_err(dev, "failed to enable sram regulator\n"); + goto out_free_resources; + } + } + + /* + * We assume min voltage is 0 and tracking target voltage using + * min_volt_shift for each iteration. + * The retry_max is 3 times of expected iteration count. + */ + drv->vtrack_max = 3 * DIV_ROUND_UP(max(drv->soc_data->sram_max_volt, + drv->soc_data->proc_max_volt), + drv->soc_data->min_volt_shift); + + ret = clk_prepare_enable(drv->cci_clk); + if (ret) + goto out_free_resources; + + ret = dev_pm_opp_of_add_table(dev); + if (ret) { + dev_err(dev, "failed to add opp table: %d\n", ret); + goto out_disable_cci_clk; + } + + rate = clk_get_rate(drv->inter_clk); + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + dev_err(dev, "failed to get intermediate opp: %d\n", ret); + goto out_remove_opp_table; + } + drv->inter_voltage = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + rate = U32_MAX; + opp = dev_pm_opp_find_freq_floor(drv->dev, &rate); + if (IS_ERR(opp)) { + dev_err(dev, "failed to get opp\n"); + ret = PTR_ERR(opp); + goto out_remove_opp_table; + } + + opp_volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + ret = mtk_ccifreq_set_voltage(drv, opp_volt); + if (ret) { + dev_err(dev, "failed to scale to highest voltage %lu in proc_reg\n", + opp_volt); + goto out_remove_opp_table; + } + + passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); + if (!passive_data) { + ret = -ENOMEM; + goto out_remove_opp_table; + } + + passive_data->parent_type = CPUFREQ_PARENT_DEV; + drv->devfreq = devm_devfreq_add_device(dev, &mtk_ccifreq_profile, + DEVFREQ_GOV_PASSIVE, + passive_data); + if (IS_ERR(drv->devfreq)) { + ret = -EPROBE_DEFER; + dev_err(dev, "failed to add devfreq device: %ld\n", + PTR_ERR(drv->devfreq)); + goto out_remove_opp_table; + } + + drv->opp_nb.notifier_call = mtk_ccifreq_opp_notifier; + ret = dev_pm_opp_register_notifier(dev, &drv->opp_nb); + if (ret) { + dev_err(dev, "failed to register opp notifier: %d\n", ret); + goto out_remove_opp_table; + } + return 0; + +out_remove_opp_table: + dev_pm_opp_of_remove_table(dev); + +out_disable_cci_clk: + clk_disable_unprepare(drv->cci_clk); + +out_free_resources: + if (regulator_is_enabled(drv->proc_reg)) + regulator_disable(drv->proc_reg); + if (drv->sram_reg && regulator_is_enabled(drv->sram_reg)) + regulator_disable(drv->sram_reg); + + return ret; +} + +static int mtk_ccifreq_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_ccifreq_drv *drv; + + drv = platform_get_drvdata(pdev); + + dev_pm_opp_unregister_notifier(dev, &drv->opp_nb); + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(drv->cci_clk); + regulator_disable(drv->proc_reg); + if (drv->sram_reg) + regulator_disable(drv->sram_reg); + + return 0; +} + +static const struct mtk_ccifreq_platform_data mt8183_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1150000, +}; + +static const struct mtk_ccifreq_platform_data mt8186_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 250000, + .proc_max_volt = 1118750, + .sram_min_volt = 850000, + .sram_max_volt = 1118750, +}; + +static const struct of_device_id mtk_ccifreq_machines[] = { + { .compatible = "mediatek,mt8183-cci", .data = &mt8183_platform_data }, + { .compatible = "mediatek,mt8186-cci", .data = &mt8186_platform_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_ccifreq_machines); + +static struct platform_driver mtk_ccifreq_platdrv = { + .probe = mtk_ccifreq_probe, + .remove = mtk_ccifreq_remove, + .driver = { + .name = "mtk-ccifreq", + .of_match_table = mtk_ccifreq_machines, + }, +}; +module_platform_driver(mtk_ccifreq_platdrv); + +MODULE_DESCRIPTION("MediaTek CCI devfreq driver"); +MODULE_AUTHOR("Jia-Wei Chang <jia-wei.chang@mediatek.com>"); +MODULE_LICENSE("GPL v2");