diff mbox series

dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7

Message ID 20220828081022.96813-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series dt-bindings: thermal: qcom-spmi-adc-tm5: add qcom,adc-tm7 | expand

Commit Message

Krzysztof Kozlowski Aug. 28, 2022, 8:10 a.m. UTC
The qcom,adc-tm7 compatible is already used in PMK8350 so add it to the
Qualcomm PMIC Thermal Monitoring ADC.  Based on downstream sources, the
new compatible for TM7 differs from older TM5 by allowing configuring
per sensor decimation, time measurement and number of sample averaging -
unlike one configuration per entire device.  This was not reflected in
the bindings, therefore comment the new compatible as incomplete as it
might change and its ABI is no stable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
 1 file changed, 1 insertion(+)

Comments

Rob Herring (Arm) Aug. 30, 2022, 4:25 p.m. UTC | #1
On Sun, 28 Aug 2022 11:10:22 +0300, Krzysztof Kozlowski wrote:
> The qcom,adc-tm7 compatible is already used in PMK8350 so add it to the
> Qualcomm PMIC Thermal Monitoring ADC.  Based on downstream sources, the
> new compatible for TM7 differs from older TM5 by allowing configuring
> per sensor decimation, time measurement and number of sample averaging -
> unlike one configuration per entire device.  This was not reflected in
> the bindings, therefore comment the new compatible as incomplete as it
> might change and its ABI is no stable.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski Sept. 19, 2022, 11:53 a.m. UTC | #2
On 28/08/2022 10:10, Krzysztof Kozlowski wrote:
> The qcom,adc-tm7 compatible is already used in PMK8350 so add it to the
> Qualcomm PMIC Thermal Monitoring ADC.  Based on downstream sources, the
> new compatible for TM7 differs from older TM5 by allowing configuring
> per sensor decimation, time measurement and number of sample averaging -
> unlike one configuration per entire device.  This was not reflected in
> the bindings, therefore comment the new compatible as incomplete as it
> might change and its ABI is no stable.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 +
>  1 file changed, 1 insertion(+)

Bjorn, Daniel,

Anyone picking this patch?

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index feb390d50696..88f5fd1e2f28 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -13,6 +13,7 @@  properties:
     enum:
       - qcom,spmi-adc-tm5
       - qcom,spmi-adc-tm5-gen2
+      - qcom,adc-tm7 # Incomplete / subject to change
 
   reg:
     maxItems: 1