| Message ID | 20220928210059.891387-4-daniel.lezcano@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Rework the trip points creation | expand |
On Wed, Sep 28, 2022 at 11:01 PM Daniel Lezcano <daniel.lezcano@linaro.org> wrote: > > The thermal zone ops defines a set_trip callback where we can invoke > the backend driver to set an interrupt for the next trip point > temperature being crossed the way up or down, or setting the low level > with the hysteresis. > > The ops is only called from the thermal sysfs code where the userspace > has the ability to modify a trip point characteristic. > > With the effort of encapsulating the thermal framework core code, > let's create a thermal_zone_set_trip() which is the writable side of > the thermal_zone_get_trip() and put there all the ops encapsulation. > > Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> > --- > drivers/thermal/thermal_core.c | 47 +++++++++++++++++++++++++++++ > drivers/thermal/thermal_sysfs.c | 52 +++++++++++---------------------- > include/linux/thermal.h | 3 ++ > 3 files changed, 67 insertions(+), 35 deletions(-) > > diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c > index 16ef91dc102f..2675671781cd 100644 > --- a/drivers/thermal/thermal_core.c > +++ b/drivers/thermal/thermal_core.c > @@ -1211,6 +1211,53 @@ int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, > } > EXPORT_SYMBOL_GPL(thermal_zone_get_trip); > > +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, > + const struct thermal_trip *trip) > +{ > + struct thermal_trip t; > + int ret = -EINVAL; > + > + mutex_lock(&tz->lock); > + > + if (!tz->ops->set_trip_temp && !tz->ops->set_trip_hyst && !tz->trips) > + goto out; > + > + ret = __thermal_zone_get_trip(tz, trip_id, &t); > + if (ret) > + goto out; > + > + if (t.type != trip->type) { > + ret = -EINVAL; > + goto out; > + } > + > + if (t.temperature != trip->temperature && tz->ops->set_trip_temp) { > + ret = tz->ops->set_trip_temp(tz, trip_id, trip->temperature); > + if (ret) > + goto out; > + } > + > + if (t.hysteresis != trip->hysteresis && tz->ops->set_trip_hyst) { > + ret = tz->ops->set_trip_hyst(tz, trip_id, trip->hysteresis); > + if (ret) > + goto out; > + } > + > + if (tz->trips && ((t.temperature != trip->temperature) || > + (t.hysteresis != trip->hysteresis))) if (tz->trips && (t.temperature != trip->temperature || t.hysteresis != trip->hysteresis)) pretty please, and I don't think that it is necessary to break this line. > + tz->trips[trip_id] = *trip; > +out: > + mutex_unlock(&tz->lock); > + > + if (!ret) { > + thermal_notify_tz_trip_change(tz->id, trip_id, trip->type, > + trip->temperature, trip->hysteresis); > + thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED); > + } > + > + return ret; > +} > + > /** > * thermal_zone_device_register_with_trips() - register a new thermal zone device > * @type: the thermal zone device type > diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c > index 6c45194aaabb..8d7b25ab67c2 100644 > --- a/drivers/thermal/thermal_sysfs.c > +++ b/drivers/thermal/thermal_sysfs.c > @@ -115,32 +115,19 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, > struct thermal_trip trip; > int trip_id, ret; > > - if (!tz->ops->set_trip_temp && !tz->trips) > - return -EPERM; > - > if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1) > return -EINVAL; > > - if (kstrtoint(buf, 10, &trip.temperature)) > - return -EINVAL; > - > - if (tz->ops->set_trip_temp) { > - ret = tz->ops->set_trip_temp(tz, trip_id, trip.temperature); > - if (ret) > - return ret; > - } > - > - if (tz->trips) > - tz->trips[trip_id].temperature = trip.temperature; > - > ret = thermal_zone_get_trip(tz, trip_id, &trip); > if (ret) > return ret; > > - thermal_notify_tz_trip_change(tz->id, trip_id, trip.type, > - trip.temperature, trip.hysteresis); > + if (kstrtoint(buf, 10, &trip.temperature)) > + return -EINVAL; > > - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); > + ret = thermal_zone_set_trip(tz, trip_id, &trip); > + if (ret) > + return ret; > > return count; > } > @@ -168,29 +155,24 @@ trip_point_hyst_store(struct device *dev, struct device_attribute *attr, > const char *buf, size_t count) > { > struct thermal_zone_device *tz = to_thermal_zone(dev); > - int trip, ret; > - int temperature; > - > - if (!tz->ops->set_trip_hyst) > - return -EPERM; > + struct thermal_trip trip; > + int trip_id, ret; > > - if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1) > + if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip_id) != 1) > return -EINVAL; > > - if (kstrtoint(buf, 10, &temperature)) > - return -EINVAL; > + ret = thermal_zone_get_trip(tz, trip_id, &trip); > + if (ret) > + return ret; > > - /* > - * We are not doing any check on the 'temperature' value > - * here. The driver implementing 'set_trip_hyst' has to > - * take care of this. > - */ > - ret = tz->ops->set_trip_hyst(tz, trip, temperature); > + if (kstrtoint(buf, 10, &trip.hysteresis)) > + return -EINVAL; > > - if (!ret) > - thermal_zone_set_trips(tz); > + ret = thermal_zone_set_trip(tz, trip_id, &trip); > + if (ret) > + return ret; > > - return ret ? ret : count; > + return count; > } > > static ssize_t > diff --git a/include/linux/thermal.h b/include/linux/thermal.h > index feb8b61df746..66373f872237 100644 > --- a/include/linux/thermal.h > +++ b/include/linux/thermal.h > @@ -338,6 +338,9 @@ static inline void devm_thermal_of_zone_unregister(struct device *dev, > int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, > struct thermal_trip *trip); > > +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, > + const struct thermal_trip *trip); > + > int thermal_zone_get_num_trips(struct thermal_zone_device *tz); > > int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp); > -- > 2.34.1 >
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 16ef91dc102f..2675671781cd 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1211,6 +1211,53 @@ int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, } EXPORT_SYMBOL_GPL(thermal_zone_get_trip); +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, + const struct thermal_trip *trip) +{ + struct thermal_trip t; + int ret = -EINVAL; + + mutex_lock(&tz->lock); + + if (!tz->ops->set_trip_temp && !tz->ops->set_trip_hyst && !tz->trips) + goto out; + + ret = __thermal_zone_get_trip(tz, trip_id, &t); + if (ret) + goto out; + + if (t.type != trip->type) { + ret = -EINVAL; + goto out; + } + + if (t.temperature != trip->temperature && tz->ops->set_trip_temp) { + ret = tz->ops->set_trip_temp(tz, trip_id, trip->temperature); + if (ret) + goto out; + } + + if (t.hysteresis != trip->hysteresis && tz->ops->set_trip_hyst) { + ret = tz->ops->set_trip_hyst(tz, trip_id, trip->hysteresis); + if (ret) + goto out; + } + + if (tz->trips && ((t.temperature != trip->temperature) || + (t.hysteresis != trip->hysteresis))) + tz->trips[trip_id] = *trip; +out: + mutex_unlock(&tz->lock); + + if (!ret) { + thermal_notify_tz_trip_change(tz->id, trip_id, trip->type, + trip->temperature, trip->hysteresis); + thermal_zone_device_update(tz, THERMAL_TRIP_CHANGED); + } + + return ret; +} + /** * thermal_zone_device_register_with_trips() - register a new thermal zone device * @type: the thermal zone device type diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index 6c45194aaabb..8d7b25ab67c2 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -115,32 +115,19 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr, struct thermal_trip trip; int trip_id, ret; - if (!tz->ops->set_trip_temp && !tz->trips) - return -EPERM; - if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1) return -EINVAL; - if (kstrtoint(buf, 10, &trip.temperature)) - return -EINVAL; - - if (tz->ops->set_trip_temp) { - ret = tz->ops->set_trip_temp(tz, trip_id, trip.temperature); - if (ret) - return ret; - } - - if (tz->trips) - tz->trips[trip_id].temperature = trip.temperature; - ret = thermal_zone_get_trip(tz, trip_id, &trip); if (ret) return ret; - thermal_notify_tz_trip_change(tz->id, trip_id, trip.type, - trip.temperature, trip.hysteresis); + if (kstrtoint(buf, 10, &trip.temperature)) + return -EINVAL; - thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + ret = thermal_zone_set_trip(tz, trip_id, &trip); + if (ret) + return ret; return count; } @@ -168,29 +155,24 @@ trip_point_hyst_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct thermal_zone_device *tz = to_thermal_zone(dev); - int trip, ret; - int temperature; - - if (!tz->ops->set_trip_hyst) - return -EPERM; + struct thermal_trip trip; + int trip_id, ret; - if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1) + if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip_id) != 1) return -EINVAL; - if (kstrtoint(buf, 10, &temperature)) - return -EINVAL; + ret = thermal_zone_get_trip(tz, trip_id, &trip); + if (ret) + return ret; - /* - * We are not doing any check on the 'temperature' value - * here. The driver implementing 'set_trip_hyst' has to - * take care of this. - */ - ret = tz->ops->set_trip_hyst(tz, trip, temperature); + if (kstrtoint(buf, 10, &trip.hysteresis)) + return -EINVAL; - if (!ret) - thermal_zone_set_trips(tz); + ret = thermal_zone_set_trip(tz, trip_id, &trip); + if (ret) + return ret; - return ret ? ret : count; + return count; } static ssize_t diff --git a/include/linux/thermal.h b/include/linux/thermal.h index feb8b61df746..66373f872237 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -338,6 +338,9 @@ static inline void devm_thermal_of_zone_unregister(struct device *dev, int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, struct thermal_trip *trip); +int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, + const struct thermal_trip *trip); + int thermal_zone_get_num_trips(struct thermal_zone_device *tz); int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp);
The thermal zone ops defines a set_trip callback where we can invoke the backend driver to set an interrupt for the next trip point temperature being crossed the way up or down, or setting the low level with the hysteresis. The ops is only called from the thermal sysfs code where the userspace has the ability to modify a trip point characteristic. With the effort of encapsulating the thermal framework core code, let's create a thermal_zone_set_trip() which is the writable side of the thermal_zone_get_trip() and put there all the ops encapsulation. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/thermal_core.c | 47 +++++++++++++++++++++++++++++ drivers/thermal/thermal_sysfs.c | 52 +++++++++++---------------------- include/linux/thermal.h | 3 ++ 3 files changed, 67 insertions(+), 35 deletions(-)