diff mbox series

[v2,4/5] Documentation: amd-pstate: add driver working mode introduction

Message ID 20221117071910.3347052-5-Perry.Yuan@amd.com (mailing list archive)
State Superseded
Headers show
Series AMD Pstate driver Urgent Change | expand

Commit Message

Yuan, Perry Nov. 17, 2022, 7:19 a.m. UTC
Introduce the `amd_pstate` driver new working mode with
`amd_pstate=passive` added to kernel command line.
If there is no passive mode enabled by user, amd_pstate driver will be
disabled by default for now.

Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Tested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
---
 Documentation/admin-guide/pm/amd-pstate.rst | 30 +++++++++------------
 1 file changed, 13 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
index 8f3d30c5a0d8..06e23538f79c 100644
--- a/Documentation/admin-guide/pm/amd-pstate.rst
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -283,23 +283,19 @@  efficiency frequency management method on AMD processors.
 Kernel Module Options for ``amd-pstate``
 =========================================
 
-.. _shared_mem:
-
-``shared_mem``
-Use a module param (shared_mem) to enable related processors manually with
-**amd_pstate.shared_mem=1**.
-Due to the performance issue on the processors with `Shared Memory Support
-<perf_cap_>`_, we disable it presently and will re-enable this by default
-once we address performance issue with this solution.
-
-To check whether the current processor is using `Full MSR Support <perf_cap_>`_
-or `Shared Memory Support <perf_cap_>`_ : ::
-
-  ray@hr-test1:~$ lscpu | grep cppc
-  Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr rdpru wbnoinvd cppc arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca fsrm
-
-If the CPU flags have ``cppc``, then this processor supports `Full MSR Support
-<perf_cap_>`_. Otherwise, it supports `Shared Memory Support <perf_cap_>`_.
+Passive Mode
+------------
+
+``amd_pstate=passive``
+
+It will be enabled if the ``amd_pstate=passive`` is passed to the kernel in the command line.
+In this mode, ``amd_pstate`` driver software specifies a desired QoS target in the CPPC
+performance scale as a relative number. This can be expressed as percentage of nominal
+performance (infrastructure max). Below the nominal sustained performance level,
+desired performance expresses the average performance level of the processor subject
+to the Performance Reduction Tolerance register. Above the nominal performance level,
+processor must provide at least nominal performance requested and go higher if current
+operating conditions allow.
 
 
 ``cpupower`` tool support for ``amd-pstate``