| Message ID | 20230102091326.3959978-1-absicsz@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | [1/1] power: supply: bq27xxx: fix reporting critical level | expand |
Hi, On Mon, Jan 02, 2023 at 11:13:26AM +0200, Sicelo A. Mhlongo wrote: > The EDV1/SOC1 flag is set when the battery voltage drops below the > threshold set in EEPROM. From observing the capacity_level reported by > the driver, and reading the datasheet, EDV1 remains set even when > EDVF/SOCF gets set. Thus, bq27xxx_battery_capacity_level() never reaches > the CAPACITY_LEVEL_CRITICAL code path, since CAPACITY_LEVEL_LOW takes > precedence. > > This commit fixes the issue by swapping the order in which the flags are > tested. It was tested with bq27200 in the Nokia N900. > > Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> > --- Thanks, queued. -- Sebastian > drivers/power/supply/bq27xxx_battery.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c > index 8bf048fbd36a..5ff6f44fd47b 100644 > --- a/drivers/power/supply/bq27xxx_battery.c > +++ b/drivers/power/supply/bq27xxx_battery.c > @@ -1917,10 +1917,10 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di, > if (di->opts & BQ27XXX_O_ZERO) { > if (di->cache.flags & BQ27000_FLAG_FC) > level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; > - else if (di->cache.flags & BQ27000_FLAG_EDV1) > - level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; > else if (di->cache.flags & BQ27000_FLAG_EDVF) > level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; > + else if (di->cache.flags & BQ27000_FLAG_EDV1) > + level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; > else > level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; > } else if (di->opts & BQ27Z561_O_BITS) { > @@ -1933,10 +1933,10 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di, > } else { > if (di->cache.flags & BQ27XXX_FLAG_FC) > level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; > - else if (di->cache.flags & BQ27XXX_FLAG_SOC1) > - level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; > else if (di->cache.flags & BQ27XXX_FLAG_SOCF) > level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; > + else if (di->cache.flags & BQ27XXX_FLAG_SOC1) > + level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; > else > level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; > } > -- > 2.39.0 >
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c index 8bf048fbd36a..5ff6f44fd47b 100644 --- a/drivers/power/supply/bq27xxx_battery.c +++ b/drivers/power/supply/bq27xxx_battery.c @@ -1917,10 +1917,10 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di, if (di->opts & BQ27XXX_O_ZERO) { if (di->cache.flags & BQ27000_FLAG_FC) level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; - else if (di->cache.flags & BQ27000_FLAG_EDV1) - level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; else if (di->cache.flags & BQ27000_FLAG_EDVF) level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else if (di->cache.flags & BQ27000_FLAG_EDV1) + level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; else level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; } else if (di->opts & BQ27Z561_O_BITS) { @@ -1933,10 +1933,10 @@ static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di, } else { if (di->cache.flags & BQ27XXX_FLAG_FC) level = POWER_SUPPLY_CAPACITY_LEVEL_FULL; - else if (di->cache.flags & BQ27XXX_FLAG_SOC1) - level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; else if (di->cache.flags & BQ27XXX_FLAG_SOCF) level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else if (di->cache.flags & BQ27XXX_FLAG_SOC1) + level = POWER_SUPPLY_CAPACITY_LEVEL_LOW; else level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; }
The EDV1/SOC1 flag is set when the battery voltage drops below the threshold set in EEPROM. From observing the capacity_level reported by the driver, and reading the datasheet, EDV1 remains set even when EDVF/SOCF gets set. Thus, bq27xxx_battery_capacity_level() never reaches the CAPACITY_LEVEL_CRITICAL code path, since CAPACITY_LEVEL_LOW takes precedence. This commit fixes the issue by swapping the order in which the flags are tested. It was tested with bq27200 in the Nokia N900. Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> --- drivers/power/supply/bq27xxx_battery.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)