diff mbox series

[2/3] thermal/drivers/imx: Use the thermal framework for the trip point

Message ID 20230124135024.366486-2-daniel.lezcano@linaro.org (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series [1/3] thermal/drivers/imx: Remove get_trip_temp ops | expand

Commit Message

Daniel Lezcano Jan. 24, 2023, 1:50 p.m. UTC
The thermal framework provides an API to get the trip related to a
trip point id. We want to consolidate the generic trip points code,
thus preventing the different drivers to deal with the trip points
after they registered them.

The set_trip_temp ops will be changed regarding the above changes but
first we need to rework a bit the different implementation in the
drivers.

The goal is to prevent using the trip id but use a trip point passed
as parameter which will contain all the needed information.

As we don't have the trip point passed as parameter yet, we get the
trip point using the generic trip thermal framewrok APIs and use it to
take exactly the same decisions.

The difference with this change and the previous code is from where we
get the thermal trip point (which is the same).

No functional change intended.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/imx_thermal.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 0d94d4baea33..c115a696e83f 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -332,26 +332,29 @@  static int imx_change_mode(struct thermal_zone_device *tz,
 	return 0;
 }
 
-static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
+static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip_id,
 			     int temp)
 {
 	struct imx_thermal_data *data = tz->devdata;
+	struct thermal_trip trip;
 	int ret;
 
 	ret = pm_runtime_resume_and_get(data->dev);
 	if (ret < 0)
 		return ret;
 
+	ret = __thermal_zone_get_trip(tz, trip_id, &trip);
+	if (ret)
+		return ret;
+
 	/* do not allow changing critical threshold */
-	if (trip == IMX_TRIP_CRITICAL)
+	if (trip.type == THERMAL_TRIP_CRITICAL)
 		return -EPERM;
-
+	
 	/* do not allow passive to be set higher than critical */
 	if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
 		return -EINVAL;
 
-	trips[IMX_TRIP_PASSIVE].temperature = temp;
-
 	imx_set_alarm_temp(data, temp);
 
 	pm_runtime_put(data->dev);