Message ID | 20230316153841.3666-11-rui.zhang@intel.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | powercap/intel_rapl: Introduce RAPL TPMI support | expand |
On Thu, Mar 16, 2023 at 4:43 PM Zhang Rui <rui.zhang@intel.com> wrote: > > With RAPL MSR/MMIO Interface, each RAPL domain has one Power Limit > register. Each Power Limit register has one or two Power Limits and one > lock bit. Which tells the OS that the power limit register cannot be used IIUC. So the subject should be something like "Add support for lock bit per Power Limit" and the changelog should explain the role of the lock bits. Otherwise it is easily confused with more traditional meaning of "locking". > The number of Power Limits the lock bit applies to depends on > the number of Power Limits supported by the Power Limit register. > > With RAPL TPMI Interface, each RAPL domain supports multiple Power > Limits. And each Power Limit has a register with a lock bit. > > To handle this, introduce per Power Limit lock support. For existing > RAPL MSR/MMIO Interfaces, the lock bit in the Power Limit register > applies to all the Power Limits controlled by this register. > > Remove the per domain DOMAIN_STATE_BIOS_LOCKED flag at the same time > because it can be replaced by the per Power Limit lock. > > No functional change intended. > > Signed-off-by: Zhang Rui <rui.zhang@intel.com> > --- > drivers/powercap/intel_rapl_common.c | 40 ++++++++++++++-------------- > include/linux/intel_rapl.h | 2 ++ > 2 files changed, 22 insertions(+), 20 deletions(-) > > diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c > index 3e9141dedc1d..636e05aa711b 100644 > --- a/drivers/powercap/intel_rapl_common.c > +++ b/drivers/powercap/intel_rapl_common.c > @@ -94,7 +94,6 @@ enum unit_type { > > #define DOMAIN_STATE_INACTIVE BIT(0) > #define DOMAIN_STATE_POWER_LIMIT_SET BIT(1) > -#define DOMAIN_STATE_BIOS_LOCKED BIT(2) > > static const char *pl_names[NR_POWER_LIMITS] = { > [POWER_LIMIT1] = "long_term", > @@ -108,6 +107,7 @@ enum pl_prims { > PL_LIMIT, > PL_TIME_WINDOW, > PL_MAX_POWER, > + PL_LOCK, > }; > > static bool is_pl_valid(struct rapl_domain *rd, int pl) > @@ -117,7 +117,7 @@ static bool is_pl_valid(struct rapl_domain *rd, int pl) > return rd->rpl[pl].name ? true : false; > } > > -static int get_pl_prim(int pl, enum pl_prims prim) > +static int get_pl_prim(struct rapl_domain *rd, int pl, enum pl_prims prim) > { > switch (pl) { > case POWER_LIMIT1: > @@ -131,6 +131,9 @@ static int get_pl_prim(int pl, enum pl_prims prim) > return TIME_WINDOW1; > if (prim == PL_MAX_POWER) > return THERMAL_SPEC_POWER; > + if (prim == PL_LOCK) > + return rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2) ? > + FW_HIGH_LOCK : FW_LOCK; IMO it would be cleaner to write this as if (rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2)) return FW_HIGH_LOCK; return FW_LOCK; And because it is duplicated verbatim below, it would be better to add a helper function doing this and add a comment explaining what is going on to that function. > return -EINVAL; > case POWER_LIMIT2: > if (prim == PL_ENABLE) > @@ -143,6 +146,9 @@ static int get_pl_prim(int pl, enum pl_prims prim) > return TIME_WINDOW2; > if (prim == PL_MAX_POWER) > return MAX_POWER; > + if (prim == PL_LOCK) > + return rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2) ? > + FW_HIGH_LOCK : FW_LOCK; > return -EINVAL; > case POWER_LIMIT4: > if (prim == PL_LIMIT) > @@ -314,7 +320,7 @@ static int get_domain_enable(struct powercap_zone *power_zone, bool *mode) > u64 val; > int ret; > > - if (rd->state & DOMAIN_STATE_BIOS_LOCKED) { > + if (rd->rpl[POWER_LIMIT1].locked) { > *mode = false; > return 0; > } > @@ -599,6 +605,8 @@ static struct rapl_primitive_info rpis_default[NR_RAPL_PRIMITIVES] = { > RAPL_DOMAIN_REG_STATUS, ENERGY_UNIT, 0), > [FW_LOCK] = PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31, > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > + [FW_HIGH_LOCK] = PRIMITIVE_INFO_INIT(FW_LOCK, POWER_HIGH_LOCK, 63, > + RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > [PL1_ENABLE] = PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), > [PL1_CLAMP] = PRIMITIVE_INFO_INIT(PL1_CLAMP, POWER_LIMIT1_CLAMP, 16, > @@ -719,11 +727,6 @@ static int rapl_read_data_raw(struct rapl_domain *rd, > > cpu = rd->rp->lead_cpu; > > - /* domain with 2 limits has different bit */ > - if (prim == FW_LOCK && (rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2))) { > - rpi->mask = POWER_HIGH_LOCK; > - rpi->shift = 63; > - } > /* non-hardware data are collected by the polling thread */ > if (rpi->flag & RAPL_PRIMITIVE_DERIVED) { > *data = rd->rdd.primitives[prim]; > @@ -781,7 +784,7 @@ static int rapl_write_data_raw(struct rapl_domain *rd, > static int rapl_read_pl_data(struct rapl_domain *rd, int pl, > enum pl_prims pl_prim, bool xlate, u64 *data) > { > - enum rapl_primitives prim = get_pl_prim(pl, pl_prim); > + enum rapl_primitives prim = get_pl_prim(rd, pl, pl_prim); > > if (!is_pl_valid(rd, pl)) > return -EINVAL; > @@ -793,12 +796,12 @@ static int rapl_write_pl_data(struct rapl_domain *rd, int pl, > enum pl_prims pl_prim, > unsigned long long value) > { > - enum rapl_primitives prim = get_pl_prim(pl, pl_prim); > + enum rapl_primitives prim = get_pl_prim(rd, pl, pl_prim); > > if (!is_pl_valid(rd, pl)) > return -EINVAL; > > - if (rd->state & DOMAIN_STATE_BIOS_LOCKED) { > + if (rd->rpl[pl].locked) { > pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name, rd->name, pl_names[pl]); > return -EACCES; > } > @@ -1305,17 +1308,14 @@ static void rapl_detect_powerlimit(struct rapl_domain *rd) > u64 val64; > int i; > > - /* check if the domain is locked by BIOS, ignore if MSR doesn't exist */ > - if (!rapl_read_data_raw(rd, FW_LOCK, false, &val64)) { > - if (val64) { > - pr_info("RAPL %s domain %s locked by BIOS\n", > - rd->rp->name, rd->name); > - rd->state |= DOMAIN_STATE_BIOS_LOCKED; > + for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { > + if (!rapl_read_pl_data(rd, i, PL_LOCK, false, &val64)) { > + rd->rpl[i].locked = val64; Using !!val64 here would be cleaner. Or even explicitly assign true to in in the block following the if () statement below. > + if (val64) > + pr_info("%s:%s:%s locked by BIOS\n", > + rd->rp->name, rd->name, pl_names[i]); > } > - } > > - /* check if power limit exists, otherwise domain is monitoring only */ > - for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { > if (rapl_read_pl_data(rd, i, PL_ENABLE, false, &val64)) > rd->rpl[i].name = NULL; > } > diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h > index 86cd06bbea0c..325ec00be7a7 100644 > --- a/include/linux/intel_rapl.h > +++ b/include/linux/intel_rapl.h > @@ -42,6 +42,7 @@ enum rapl_primitives { > POWER_LIMIT4, > ENERGY_COUNTER, > FW_LOCK, > + FW_HIGH_LOCK, > > PL1_ENABLE, /* power limit 1, aka long term */ > PL1_CLAMP, /* allow frequency to go below OS request */ > @@ -81,6 +82,7 @@ struct rapl_power_limit { > struct powercap_zone_constraint *constraint; > struct rapl_domain *domain; > const char *name; > + bool locked; > u64 last_power_limit; > }; > > -- > 2.25.1 >
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c index 3e9141dedc1d..636e05aa711b 100644 --- a/drivers/powercap/intel_rapl_common.c +++ b/drivers/powercap/intel_rapl_common.c @@ -94,7 +94,6 @@ enum unit_type { #define DOMAIN_STATE_INACTIVE BIT(0) #define DOMAIN_STATE_POWER_LIMIT_SET BIT(1) -#define DOMAIN_STATE_BIOS_LOCKED BIT(2) static const char *pl_names[NR_POWER_LIMITS] = { [POWER_LIMIT1] = "long_term", @@ -108,6 +107,7 @@ enum pl_prims { PL_LIMIT, PL_TIME_WINDOW, PL_MAX_POWER, + PL_LOCK, }; static bool is_pl_valid(struct rapl_domain *rd, int pl) @@ -117,7 +117,7 @@ static bool is_pl_valid(struct rapl_domain *rd, int pl) return rd->rpl[pl].name ? true : false; } -static int get_pl_prim(int pl, enum pl_prims prim) +static int get_pl_prim(struct rapl_domain *rd, int pl, enum pl_prims prim) { switch (pl) { case POWER_LIMIT1: @@ -131,6 +131,9 @@ static int get_pl_prim(int pl, enum pl_prims prim) return TIME_WINDOW1; if (prim == PL_MAX_POWER) return THERMAL_SPEC_POWER; + if (prim == PL_LOCK) + return rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2) ? + FW_HIGH_LOCK : FW_LOCK; return -EINVAL; case POWER_LIMIT2: if (prim == PL_ENABLE) @@ -143,6 +146,9 @@ static int get_pl_prim(int pl, enum pl_prims prim) return TIME_WINDOW2; if (prim == PL_MAX_POWER) return MAX_POWER; + if (prim == PL_LOCK) + return rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2) ? + FW_HIGH_LOCK : FW_LOCK; return -EINVAL; case POWER_LIMIT4: if (prim == PL_LIMIT) @@ -314,7 +320,7 @@ static int get_domain_enable(struct powercap_zone *power_zone, bool *mode) u64 val; int ret; - if (rd->state & DOMAIN_STATE_BIOS_LOCKED) { + if (rd->rpl[POWER_LIMIT1].locked) { *mode = false; return 0; } @@ -599,6 +605,8 @@ static struct rapl_primitive_info rpis_default[NR_RAPL_PRIMITIVES] = { RAPL_DOMAIN_REG_STATUS, ENERGY_UNIT, 0), [FW_LOCK] = PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31, RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), + [FW_HIGH_LOCK] = PRIMITIVE_INFO_INIT(FW_LOCK, POWER_HIGH_LOCK, 63, + RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), [PL1_ENABLE] = PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0), [PL1_CLAMP] = PRIMITIVE_INFO_INIT(PL1_CLAMP, POWER_LIMIT1_CLAMP, 16, @@ -719,11 +727,6 @@ static int rapl_read_data_raw(struct rapl_domain *rd, cpu = rd->rp->lead_cpu; - /* domain with 2 limits has different bit */ - if (prim == FW_LOCK && (rd->rp->priv->limits[rd->id] & BIT(POWER_LIMIT2))) { - rpi->mask = POWER_HIGH_LOCK; - rpi->shift = 63; - } /* non-hardware data are collected by the polling thread */ if (rpi->flag & RAPL_PRIMITIVE_DERIVED) { *data = rd->rdd.primitives[prim]; @@ -781,7 +784,7 @@ static int rapl_write_data_raw(struct rapl_domain *rd, static int rapl_read_pl_data(struct rapl_domain *rd, int pl, enum pl_prims pl_prim, bool xlate, u64 *data) { - enum rapl_primitives prim = get_pl_prim(pl, pl_prim); + enum rapl_primitives prim = get_pl_prim(rd, pl, pl_prim); if (!is_pl_valid(rd, pl)) return -EINVAL; @@ -793,12 +796,12 @@ static int rapl_write_pl_data(struct rapl_domain *rd, int pl, enum pl_prims pl_prim, unsigned long long value) { - enum rapl_primitives prim = get_pl_prim(pl, pl_prim); + enum rapl_primitives prim = get_pl_prim(rd, pl, pl_prim); if (!is_pl_valid(rd, pl)) return -EINVAL; - if (rd->state & DOMAIN_STATE_BIOS_LOCKED) { + if (rd->rpl[pl].locked) { pr_warn("%s:%s:%s locked by BIOS\n", rd->rp->name, rd->name, pl_names[pl]); return -EACCES; } @@ -1305,17 +1308,14 @@ static void rapl_detect_powerlimit(struct rapl_domain *rd) u64 val64; int i; - /* check if the domain is locked by BIOS, ignore if MSR doesn't exist */ - if (!rapl_read_data_raw(rd, FW_LOCK, false, &val64)) { - if (val64) { - pr_info("RAPL %s domain %s locked by BIOS\n", - rd->rp->name, rd->name); - rd->state |= DOMAIN_STATE_BIOS_LOCKED; + for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { + if (!rapl_read_pl_data(rd, i, PL_LOCK, false, &val64)) { + rd->rpl[i].locked = val64; + if (val64) + pr_info("%s:%s:%s locked by BIOS\n", + rd->rp->name, rd->name, pl_names[i]); } - } - /* check if power limit exists, otherwise domain is monitoring only */ - for (i = POWER_LIMIT1; i < NR_POWER_LIMITS; i++) { if (rapl_read_pl_data(rd, i, PL_ENABLE, false, &val64)) rd->rpl[i].name = NULL; } diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h index 86cd06bbea0c..325ec00be7a7 100644 --- a/include/linux/intel_rapl.h +++ b/include/linux/intel_rapl.h @@ -42,6 +42,7 @@ enum rapl_primitives { POWER_LIMIT4, ENERGY_COUNTER, FW_LOCK, + FW_HIGH_LOCK, PL1_ENABLE, /* power limit 1, aka long term */ PL1_CLAMP, /* allow frequency to go below OS request */ @@ -81,6 +82,7 @@ struct rapl_power_limit { struct powercap_zone_constraint *constraint; struct rapl_domain *domain; const char *name; + bool locked; u64 last_power_limit; };
With RAPL MSR/MMIO Interface, each RAPL domain has one Power Limit register. Each Power Limit register has one or two Power Limits and one lock bit. The number of Power Limits the lock bit applies to depends on the number of Power Limits supported by the Power Limit register. With RAPL TPMI Interface, each RAPL domain supports multiple Power Limits. And each Power Limit has a register with a lock bit. To handle this, introduce per Power Limit lock support. For existing RAPL MSR/MMIO Interfaces, the lock bit in the Power Limit register applies to all the Power Limits controlled by this register. Remove the per domain DOMAIN_STATE_BIOS_LOCKED flag at the same time because it can be replaced by the per Power Limit lock. No functional change intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> --- drivers/powercap/intel_rapl_common.c | 40 ++++++++++++++-------------- include/linux/intel_rapl.h | 2 ++ 2 files changed, 22 insertions(+), 20 deletions(-)