| Message ID | 20230330153222.2875121-6-bryan.odonoghue@linaro.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add MSM8939 SoC support with two devices | expand |
On Thu, Mar 30, 2023 at 04:32:22PM +0100, Bryan O'Donoghue wrote: > Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip". > > Tulip is paired with: > > - wcn3660 > - smb1360 battery charger > - 720p Truly NT35521 Panel > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 184 ++++++++++++++++++ > 2 files changed, 185 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 31e0ac97fc088..3f8321ecb7e5f 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb > +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb > diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > new file mode 100644 > index 0000000000000..cb47bb2413a7c > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts > @@ -0,0 +1,184 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2015, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022-2023, Bryan O'Donoghue. > + * > + */ > + > +/dts-v1/; > + > +#include "msm8939.dtsi" > +#include "msm8939-pm8916.dtsi" > +#include <dt-bindings/arm/qcom,ids.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > + > +/ { > + model = "Sony Xperia M4 Aqua"; > + compatible = "sony,kanuti-tulip", "qcom,msm8939"; > + > + qcom,board-id = <QCOM_BOARD_ID_MTP 0>; > + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>; > + > + aliases { > + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ > + mmc1 = &sdhc_2; /* SDC2 SD card slot */ > + serial0 = &blsp1_uart2; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + usb_id: usb-id { > + compatible = "linux,extcon-usb-gpio"; > + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&usb_id_default>; > + pinctrl-names = "default"; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&tlmm { > + usb_id_default: usb-id-default-state { > + pins = "gpio110"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <8>; > + }; > +}; FWIW the node order seems wrong here (m -> t -> p). > + > +&pronto { > + status = "okay"; > + > + iris { > + compatible = "qcom,wcn3660"; > + }; > +}; > + > [...] > +&sdhc_1 { > + pinctrl-0 = <&sdc1_default_state>; > + pinctrl-1 = <&sdc1_sleep_state>; > + pinctrl-names = "default", "sleep"; > + status = "okay"; > +}; > + > +&sdhc_2 { > + pinctrl-0 = <&sdc2_default_state>; > + pinctrl-1 = <&sdc2_sleep_state>; > + pinctrl-names = "default", "sleep"; > + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&usb { > + dr_mode = "device"; > + extcon = <&usb_id>, <&usb_id>; > + status = "okay"; > +}; > + Hm is there a special reason for forcing dr_mode = "device" here? If the USB ID GPIO works properly you should be in device mode all the time unless you plug in an USB OTG adapter. Seems a bit strange. Thanks, Stephan
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31e0ac97fc088..3f8321ecb7e5f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts new file mode 100644 index 0000000000000..cb47bb2413a7c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Bryan O'Donoghue. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia M4 Aqua"; + compatible = "sony,kanuti-tulip", "qcom,msm8939"; + + qcom,board-id = <QCOM_BOARD_ID_MTP 0>; + qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660"; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb { + dr_mode = "device"; + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +};