diff mbox series

[v2,33/45] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x7

Message ID 20230623203056.689705-34-varshini.rajendran@microchip.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series Add support for sam9x7 SoC family | expand

Commit Message

Varshini Rajendran June 23, 2023, 8:30 p.m. UTC
Add sam9x7 bindings.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 Documentation/devicetree/bindings/usb/atmel-usb.txt | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Krzysztof Kozlowski June 24, 2023, 8:23 a.m. UTC | #1
On 23/06/2023 22:30, Varshini Rajendran wrote:
> Add sam9x7 bindings.
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  Documentation/devicetree/bindings/usb/atmel-usb.txt | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
> index 12183ef47ee4..6359af0123bf 100644
> --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
> +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
> @@ -3,8 +3,8 @@ Atmel SOC USB controllers
>  OHCI
>  
>  Required properties:
> - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
> -   used in host mode.
> + - compatible: Should be "atmel,at91rm9200-ohci" or "microchip,sam9x7-ohci"

That's not what your DTS is saying. NAK.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 12183ef47ee4..6359af0123bf 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -3,8 +3,8 @@  Atmel SOC USB controllers
 OHCI
 
 Required properties:
- - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91rm9200-ohci" or "microchip,sam9x7-ohci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
@@ -30,8 +30,8 @@  usb0: ohci@500000 {
 EHCI
 
 Required properties:
- - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91sam9g45-ehci" or "microchip,sam9x7-ehci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
@@ -87,6 +87,7 @@  Required properties:
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
 	       "microchip,sam9x60-udc"
+	       "microchip,sam9x7-udc"
 	       "microchip,lan9662-udc"
 	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
 	       is required.