diff mbox series

[v3,27/28] ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices

Message ID 20230702174246.121656-28-dmitry.baryshkov@linaro.org (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series ARM: qcom: apq8064: support CPU frequency scaling | expand

Commit Message

Dmitry Baryshkov July 2, 2023, 5:42 p.m. UTC
The SAW2 device should describe the regulator constraints rather than
just declaring that it has the regulator.

Drop the 'regulator' property. If/when CPU voltage scaling is
implemented for this platform, proper regulator nodes show be added
instead.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 5 -----
 1 file changed, 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f0ef86fadc9d..ad3c922843c7 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -350,31 +350,26 @@  acc3: power-manager@b0b8000 {
 		saw0: regulator@b089000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw1: regulator@b099000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw2: regulator@b0a9000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw3: regulator@b0b9000 {
 			compatible = "qcom,saw2";
 			reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
-			regulator;
 		};
 
 		saw_l2: regulator@b012000 {
 			compatible = "qcom,saw2";
 			reg = <0xb012000 0x1000>;
-			regulator;
 		};
 
 		blsp1_uart1: serial@78af000 {