| Message ID | 20230710095926.15614-6-frank.li@vivo.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add devm_request_threaded_irq_probe() and devm_request_irq_probe() | expand |
On 10/07/2023 12:59, Yangtao Li wrote: > There are more than 700 calls to devm_request_threaded_irq method and > more than 1000 calls to devm_request_irq method. Most drivers only > request one interrupt resource, and these error messages are basically > the same. If error messages are printed everywhere, more than 2000 lines > of code can be saved by removing the msg in the driver. > > And tglx point out that: > > If we actually look at the call sites of > devm_request_threaded_irq() then the vast majority of them print more or > less lousy error messages. A quick grep/sed/awk/sort/uniq revealed > > 519 messages total (there are probably more) > > 352 unique messages > > 323 unique messages after lower casing > > Those 323 are mostly just variants of the same patterns with > slight modifications in formatting and information provided. > > 186 of these messages do not deliver any useful information, > e.g. "no irq", " > > The most useful one of all is: "could request wakeup irq: %d" > > So there is certainly an argument to be made that this particular > function should print a well formatted and informative error message. > > It's not a general allocator like kmalloc(). It's specialized and in the > vast majority of cases failing to request the interrupt causes the > device probe to fail. So having proper and consistent information why > the device cannot be used _is_ useful. > > So convert to use devm_request*_irq_probe() API, which ensure that all > error handling branches print error information. > > In this way, when this function fails, the upper-layer functions can > directly return an error code without missing debugging information. > Otherwise, the error message will be printed redundantly or missing. > > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Krzysztof Kozlowski <krzk@kernel.org> > Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> > Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> > Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > Signed-off-by: Yangtao Li <frank.li@vivo.com> > --- > drivers/thermal/db8500_thermal.c | 16 ++++++---------- > drivers/thermal/qcom/lmh.c | 7 +++---- Please split LMH to a separate driver. > 2 files changed, 9 insertions(+), 14 deletions(-) > > diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c > index fca5c2c93bf9..0ef8fc2eb4a1 100644 > --- a/drivers/thermal/db8500_thermal.c > +++ b/drivers/thermal/db8500_thermal.c > @@ -164,25 +164,21 @@ static int db8500_thermal_probe(struct platform_device *pdev) > if (low_irq < 0) > return low_irq; > > - ret = devm_request_threaded_irq(dev, low_irq, NULL, > + ret = devm_request_threaded_irq_probe(dev, low_irq, NULL, > prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, > - "dbx500_temp_low", th); > - if (ret < 0) { > - dev_err(dev, "failed to allocate temp low irq\n"); > + "dbx500_temp_low", th, "temp low"); > + if (ret < 0) > return ret; > - } > > high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); > if (high_irq < 0) > return high_irq; > > - ret = devm_request_threaded_irq(dev, high_irq, NULL, > + ret = devm_request_threaded_irq_probe(dev, high_irq, NULL, > prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, > - "dbx500_temp_high", th); > - if (ret < 0) { > - dev_err(dev, "failed to allocate temp high irq\n"); > + "dbx500_temp_high", th, "temp high"); > + if (ret < 0) > return ret; > - } > > /* register of thermal sensor and get info from DT */ > th->tz = devm_thermal_of_zone_register(dev, 0, th, &thdev_ops); > diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c > index f6edb12ec004..48a14d7e8bf5 100644 > --- a/drivers/thermal/qcom/lmh.c > +++ b/drivers/thermal/qcom/lmh.c > @@ -207,11 +207,10 @@ static int lmh_probe(struct platform_device *pdev) > > /* Disable the irq and let cpufreq enable it when ready to handle the interrupt */ > irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); > - ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, > - IRQF_ONESHOT | IRQF_NO_SUSPEND, > - "lmh-irq", lmh_data); > + ret = devm_request_irq_probe(dev, lmh_data->irq, lmh_handle_irq, > + IRQF_ONESHOT | IRQF_NO_SUSPEND, > + "lmh-irq", lmh_data, NULL); > if (ret) { > - dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq); > irq_domain_remove(lmh_data->domain); > return ret; > }
Hi Dmitry, On 2023/7/10 19:25, Dmitry Baryshkov wrote: > On 10/07/2023 12:59, Yangtao Li wrote: >> There are more than 700 calls to devm_request_threaded_irq method and >> more than 1000 calls to devm_request_irq method. Most drivers only >> request one interrupt resource, and these error messages are basically >> the same. If error messages are printed everywhere, more than 2000 lines >> of code can be saved by removing the msg in the driver. >> >> And tglx point out that: >> >> If we actually look at the call sites of >> devm_request_threaded_irq() then the vast majority of them print >> more or >> less lousy error messages. A quick grep/sed/awk/sort/uniq revealed >> >> 519 messages total (there are probably more) >> >> 352 unique messages >> >> 323 unique messages after lower casing >> >> Those 323 are mostly just variants of the same patterns with >> slight modifications in formatting and information provided. >> >> 186 of these messages do not deliver any useful information, >> e.g. "no irq", " >> >> The most useful one of all is: "could request wakeup irq: %d" >> >> So there is certainly an argument to be made that this particular >> function should print a well formatted and informative error message. >> >> It's not a general allocator like kmalloc(). It's specialized and >> in the >> vast majority of cases failing to request the interrupt causes the >> device probe to fail. So having proper and consistent information why >> the device cannot be used _is_ useful. >> >> So convert to use devm_request*_irq_probe() API, which ensure that all >> error handling branches print error information. >> >> In this way, when this function fails, the upper-layer functions can >> directly return an error code without missing debugging information. >> Otherwise, the error message will be printed redundantly or missing. >> >> Cc: Thomas Gleixner <tglx@linutronix.de> >> Cc: Krzysztof Kozlowski <krzk@kernel.org> >> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> >> Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> >> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> >> Signed-off-by: Yangtao Li <frank.li@vivo.com> >> --- >> drivers/thermal/db8500_thermal.c | 16 ++++++---------- >> drivers/thermal/qcom/lmh.c | 7 +++---- > > Please split LMH to a separate driver. Sorry for mixing these two patches together, can I add your Reviewed-by tag when the patch is resubmitted for the next version? Thx, Yangtao > >> 2 files changed, 9 insertions(+), 14 deletions(-) >> >> diff --git a/drivers/thermal/db8500_thermal.c >> b/drivers/thermal/db8500_thermal.c >> index fca5c2c93bf9..0ef8fc2eb4a1 100644 >> --- a/drivers/thermal/db8500_thermal.c >> +++ b/drivers/thermal/db8500_thermal.c >> @@ -164,25 +164,21 @@ static int db8500_thermal_probe(struct >> platform_device *pdev) >> if (low_irq < 0) >> return low_irq; >> - ret = devm_request_threaded_irq(dev, low_irq, NULL, >> + ret = devm_request_threaded_irq_probe(dev, low_irq, NULL, >> prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, >> - "dbx500_temp_low", th); >> - if (ret < 0) { >> - dev_err(dev, "failed to allocate temp low irq\n"); >> + "dbx500_temp_low", th, "temp low"); >> + if (ret < 0) >> return ret; >> - } >> high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); >> if (high_irq < 0) >> return high_irq; >> - ret = devm_request_threaded_irq(dev, high_irq, NULL, >> + ret = devm_request_threaded_irq_probe(dev, high_irq, NULL, >> prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, >> - "dbx500_temp_high", th); >> - if (ret < 0) { >> - dev_err(dev, "failed to allocate temp high irq\n"); >> + "dbx500_temp_high", th, "temp high"); >> + if (ret < 0) >> return ret; >> - } >> /* register of thermal sensor and get info from DT */ >> th->tz = devm_thermal_of_zone_register(dev, 0, th, &thdev_ops); >> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c >> index f6edb12ec004..48a14d7e8bf5 100644 >> --- a/drivers/thermal/qcom/lmh.c >> +++ b/drivers/thermal/qcom/lmh.c >> @@ -207,11 +207,10 @@ static int lmh_probe(struct platform_device *pdev) >> /* Disable the irq and let cpufreq enable it when ready to >> handle the interrupt */ >> irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); >> - ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, >> - IRQF_ONESHOT | IRQF_NO_SUSPEND, >> - "lmh-irq", lmh_data); >> + ret = devm_request_irq_probe(dev, lmh_data->irq, lmh_handle_irq, >> + IRQF_ONESHOT | IRQF_NO_SUSPEND, >> + "lmh-irq", lmh_data, NULL); >> if (ret) { >> - dev_err(dev, "Error %d registering irq %x\n", ret, >> lmh_data->irq); >> irq_domain_remove(lmh_data->domain); >> return ret; >> } >
On Mon, 10 Jul 2023 at 14:30, Yangtao Li <frank.li@vivo.com> wrote: > > Hi Dmitry, > > On 2023/7/10 19:25, Dmitry Baryshkov wrote: > > > On 10/07/2023 12:59, Yangtao Li wrote: > >> There are more than 700 calls to devm_request_threaded_irq method and > >> more than 1000 calls to devm_request_irq method. Most drivers only > >> request one interrupt resource, and these error messages are basically > >> the same. If error messages are printed everywhere, more than 2000 lines > >> of code can be saved by removing the msg in the driver. > >> > >> And tglx point out that: > >> > >> If we actually look at the call sites of > >> devm_request_threaded_irq() then the vast majority of them print > >> more or > >> less lousy error messages. A quick grep/sed/awk/sort/uniq revealed > >> > >> 519 messages total (there are probably more) > >> > >> 352 unique messages > >> > >> 323 unique messages after lower casing > >> > >> Those 323 are mostly just variants of the same patterns with > >> slight modifications in formatting and information provided. > >> > >> 186 of these messages do not deliver any useful information, > >> e.g. "no irq", " > >> > >> The most useful one of all is: "could request wakeup irq: %d" > >> > >> So there is certainly an argument to be made that this particular > >> function should print a well formatted and informative error message. > >> > >> It's not a general allocator like kmalloc(). It's specialized and > >> in the > >> vast majority of cases failing to request the interrupt causes the > >> device probe to fail. So having proper and consistent information why > >> the device cannot be used _is_ useful. > >> > >> So convert to use devm_request*_irq_probe() API, which ensure that all > >> error handling branches print error information. > >> > >> In this way, when this function fails, the upper-layer functions can > >> directly return an error code without missing debugging information. > >> Otherwise, the error message will be printed redundantly or missing. > >> > >> Cc: Thomas Gleixner <tglx@linutronix.de> > >> Cc: Krzysztof Kozlowski <krzk@kernel.org> > >> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> > >> Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> > >> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > >> Signed-off-by: Yangtao Li <frank.li@vivo.com> > >> --- > >> drivers/thermal/db8500_thermal.c | 16 ++++++---------- > >> drivers/thermal/qcom/lmh.c | 7 +++---- > > > > Please split LMH to a separate driver. > > > Sorry for mixing these two patches together, > > can I add your Reviewed-by tag when the patch is resubmitted for the > next version? Yes, please add it to the LMH patch. > > > Thx, > > Yangtao > > > > >> 2 files changed, 9 insertions(+), 14 deletions(-) > >> > >> diff --git a/drivers/thermal/db8500_thermal.c > >> b/drivers/thermal/db8500_thermal.c > >> index fca5c2c93bf9..0ef8fc2eb4a1 100644 > >> --- a/drivers/thermal/db8500_thermal.c > >> +++ b/drivers/thermal/db8500_thermal.c > >> @@ -164,25 +164,21 @@ static int db8500_thermal_probe(struct > >> platform_device *pdev) > >> if (low_irq < 0) > >> return low_irq; > >> - ret = devm_request_threaded_irq(dev, low_irq, NULL, > >> + ret = devm_request_threaded_irq_probe(dev, low_irq, NULL, > >> prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, > >> - "dbx500_temp_low", th); > >> - if (ret < 0) { > >> - dev_err(dev, "failed to allocate temp low irq\n"); > >> + "dbx500_temp_low", th, "temp low"); > >> + if (ret < 0) > >> return ret; > >> - } > >> high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); > >> if (high_irq < 0) > >> return high_irq; > >> - ret = devm_request_threaded_irq(dev, high_irq, NULL, > >> + ret = devm_request_threaded_irq_probe(dev, high_irq, NULL, > >> prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, > >> - "dbx500_temp_high", th); > >> - if (ret < 0) { > >> - dev_err(dev, "failed to allocate temp high irq\n"); > >> + "dbx500_temp_high", th, "temp high"); > >> + if (ret < 0) > >> return ret; > >> - } > >> /* register of thermal sensor and get info from DT */ > >> th->tz = devm_thermal_of_zone_register(dev, 0, th, &thdev_ops); > >> diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c > >> index f6edb12ec004..48a14d7e8bf5 100644 > >> --- a/drivers/thermal/qcom/lmh.c > >> +++ b/drivers/thermal/qcom/lmh.c > >> @@ -207,11 +207,10 @@ static int lmh_probe(struct platform_device *pdev) > >> /* Disable the irq and let cpufreq enable it when ready to > >> handle the interrupt */ > >> irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); > >> - ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, > >> - IRQF_ONESHOT | IRQF_NO_SUSPEND, > >> - "lmh-irq", lmh_data); > >> + ret = devm_request_irq_probe(dev, lmh_data->irq, lmh_handle_irq, > >> + IRQF_ONESHOT | IRQF_NO_SUSPEND, > >> + "lmh-irq", lmh_data, NULL); > >> if (ret) { > >> - dev_err(dev, "Error %d registering irq %x\n", ret, > >> lmh_data->irq); > >> irq_domain_remove(lmh_data->domain); > >> return ret; > >> } > >
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c index fca5c2c93bf9..0ef8fc2eb4a1 100644 --- a/drivers/thermal/db8500_thermal.c +++ b/drivers/thermal/db8500_thermal.c @@ -164,25 +164,21 @@ static int db8500_thermal_probe(struct platform_device *pdev) if (low_irq < 0) return low_irq; - ret = devm_request_threaded_irq(dev, low_irq, NULL, + ret = devm_request_threaded_irq_probe(dev, low_irq, NULL, prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, - "dbx500_temp_low", th); - if (ret < 0) { - dev_err(dev, "failed to allocate temp low irq\n"); + "dbx500_temp_low", th, "temp low"); + if (ret < 0) return ret; - } high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH"); if (high_irq < 0) return high_irq; - ret = devm_request_threaded_irq(dev, high_irq, NULL, + ret = devm_request_threaded_irq_probe(dev, high_irq, NULL, prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT, - "dbx500_temp_high", th); - if (ret < 0) { - dev_err(dev, "failed to allocate temp high irq\n"); + "dbx500_temp_high", th, "temp high"); + if (ret < 0) return ret; - } /* register of thermal sensor and get info from DT */ th->tz = devm_thermal_of_zone_register(dev, 0, th, &thdev_ops); diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c index f6edb12ec004..48a14d7e8bf5 100644 --- a/drivers/thermal/qcom/lmh.c +++ b/drivers/thermal/qcom/lmh.c @@ -207,11 +207,10 @@ static int lmh_probe(struct platform_device *pdev) /* Disable the irq and let cpufreq enable it when ready to handle the interrupt */ irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN); - ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq, - IRQF_ONESHOT | IRQF_NO_SUSPEND, - "lmh-irq", lmh_data); + ret = devm_request_irq_probe(dev, lmh_data->irq, lmh_handle_irq, + IRQF_ONESHOT | IRQF_NO_SUSPEND, + "lmh-irq", lmh_data, NULL); if (ret) { - dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq); irq_domain_remove(lmh_data->domain); return ret; }
There are more than 700 calls to devm_request_threaded_irq method and more than 1000 calls to devm_request_irq method. Most drivers only request one interrupt resource, and these error messages are basically the same. If error messages are printed everywhere, more than 2000 lines of code can be saved by removing the msg in the driver. And tglx point out that: If we actually look at the call sites of devm_request_threaded_irq() then the vast majority of them print more or less lousy error messages. A quick grep/sed/awk/sort/uniq revealed 519 messages total (there are probably more) 352 unique messages 323 unique messages after lower casing Those 323 are mostly just variants of the same patterns with slight modifications in formatting and information provided. 186 of these messages do not deliver any useful information, e.g. "no irq", " The most useful one of all is: "could request wakeup irq: %d" So there is certainly an argument to be made that this particular function should print a well formatted and informative error message. It's not a general allocator like kmalloc(). It's specialized and in the vast majority of cases failing to request the interrupt causes the device probe to fail. So having proper and consistent information why the device cannot be used _is_ useful. So convert to use devm_request*_irq_probe() API, which ensure that all error handling branches print error information. In this way, when this function fails, the upper-layer functions can directly return an error code without missing debugging information. Otherwise, the error message will be printed redundantly or missing. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Yangtao Li <frank.li@vivo.com> --- drivers/thermal/db8500_thermal.c | 16 ++++++---------- drivers/thermal/qcom/lmh.c | 7 +++---- 2 files changed, 9 insertions(+), 14 deletions(-)