diff mbox series

[1/3] thermal: k3_j72xx_bandgap: Add cooling device support

Message ID 20230809173905.1844132-2-a-nandan@ti.com (mailing list archive)
State New
Delegated to: Daniel Lezcano
Headers show
Series Add support for thermal mitigation for K3 J7200 SoC | expand

Commit Message

Apurva Nandan Aug. 9, 2023, 5:39 p.m. UTC 
From: Keerthy <j-keerthy@ti.com>

Add cpufreq as a cooling device, based on the inputs from the thermal
sensors.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
 drivers/thermal/k3_j72xx_bandgap.c | 121 +++++++++++++++++++++++++++++
 1 file changed, 121 insertions(+)

Comments

Daniel Lezcano Aug. 16, 2023, 10:15 a.m. UTC | #1 
On 09/08/2023 19:39, Apurva Nandan wrote:
> From: Keerthy <j-keerthy@ti.com>
> 
> Add cpufreq as a cooling device, based on the inputs from the thermal
> sensors.

I don't understand these changes.

By using the DT, it is all done automatically, no ?

> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> Signed-off-by: Apurva Nandan <a-nandan@ti.com>
> ---
>   drivers/thermal/k3_j72xx_bandgap.c | 121 +++++++++++++++++++++++++++++
>   1 file changed, 121 insertions(+)
> 
> diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
> index a5a0fc9b9356..c844cb527761 100644
> --- a/drivers/thermal/k3_j72xx_bandgap.c
> +++ b/drivers/thermal/k3_j72xx_bandgap.c
> @@ -19,6 +19,9 @@
>   #include <linux/of.h>
>   #include <linux/delay.h>
>   #include <linux/slab.h>
> +#include <linux/cpufreq.h>
> +#include <linux/cpumask.h>
> +#include <linux/cpu_cooling.h>
>   
>   #define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
>   #define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
> @@ -183,10 +186,28 @@ struct k3_j72xx_bandgap {
>   /* common data structures */
>   struct k3_thermal_data {
>   	struct k3_j72xx_bandgap *bgp;
> +	struct cpufreq_policy *policy;
> +	struct thermal_zone_device *ti_thermal;
> +	struct thermal_cooling_device *cool_dev;
> +	struct work_struct thermal_wq;
>   	u32 ctrl_offset;
>   	u32 stat_offset;
> +	enum thermal_device_mode mode;
> +	int prev_temp;
> +	int sensor_id;
>   };
>   
> +static void k3_thermal_work(struct work_struct *work)
> +{
> +	struct k3_thermal_data *data = container_of(work,
> +					struct k3_thermal_data, thermal_wq);
> +
> +	thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
> +
> +	dev_info(&data->ti_thermal->device, "updated thermal zone %s\n",
> +		 data->ti_thermal->type);
> +}
> +
>   static int two_cmp(int tmp, int mask)
>   {
>   	tmp = ~(tmp);
> @@ -251,8 +272,40 @@ static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
>   	return k3_bgp_read_temp(thermal_zone_device_priv(tz), temp);
>   }
>   
> +static int k3_thermal_get_trend(struct thermal_zone_device *tz, int trip, enum thermal_trend *trend)
> +{
> +	struct k3_thermal_data *data = tz->devdata;
> +	struct k3_j72xx_bandgap *bgp;
> +	u32 temp1, temp2;
> +	int tr, ret = 0;
> +
> +	bgp = data->bgp;
> +
> +	ret = k3_thermal_get_temp(tz, &temp1);
> +	if (ret)
> +		return ret;
> +	temp2 = data->prev_temp;
> +
> +	tr = temp1 - temp2;
> +
> +	data->prev_temp = temp1;
> +
> +	if (tr > 0)
> +		*trend = THERMAL_TREND_RAISING;
> +	else if (tr < 0)
> +		*trend = THERMAL_TREND_DROPPING;
> +	else
> +		*trend = THERMAL_TREND_STABLE;
> +
> +	dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
> +		temp1, temp2, *trend);
> +
> +	return ret;
> +}
> +
>   static const struct thermal_zone_device_ops k3_of_thermal_ops = {
>   	.get_temp = k3_thermal_get_temp,
> +	.get_trend = k3_thermal_get_trend,
>   };
>   
>   static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
> @@ -342,6 +395,63 @@ struct k3_j72xx_bandgap_data {
>   	const bool has_errata_i2128;
>   };
>   
> +static int k3_thermal_register_cpu_cooling(struct k3_j72xx_bandgap *bgp, int id)
> +{
> +	struct k3_thermal_data *data;
> +	struct device_node *np = bgp->dev->of_node;
> +
> +	/*
> +	 * We are assuming here that if one deploys the zone
> +	 * using DT, then it must be aware that the cooling device
> +	 * loading has to happen via cpufreq driver.
> +	 */
> +	if (of_find_property(np, "#thermal-sensor-cells", NULL))
> +		return 0;
> +
> +	data = bgp->ts_data[id];
> +	if (!data)
> +		return -EINVAL;
> +
> +	data->policy = cpufreq_cpu_get(0);
> +	if (!data->policy) {
> +		pr_debug("%s: CPUFreq policy not found\n", __func__);
> +		return -EPROBE_DEFER;
> +	}
> +
> +	/* Register cooling device */
> +	data->cool_dev = cpufreq_cooling_register(data->policy);
> +	if (IS_ERR(data->cool_dev)) {
> +		int ret = PTR_ERR(data->cool_dev);
> +
> +		dev_err(bgp->dev, "Failed to register cpu cooling device %d\n",
> +			ret);
> +		cpufreq_cpu_put(data->policy);
> +
> +		return ret;
> +	}
> +
> +	data->mode = THERMAL_DEVICE_ENABLED;
> +
> +	INIT_WORK(&data->thermal_wq, k3_thermal_work);
> +
> +	return 0;
> +}
> +
> +static int k3_thermal_unregister_cpu_cooling(struct k3_j72xx_bandgap *bgp, int id)
> +{
> +	struct k3_thermal_data *data;
> +
> +	data = bgp->ts_data[id];
> +
> +	if (!IS_ERR_OR_NULL(data)) {
> +		cpufreq_cooling_unregister(data->cool_dev);
> +		if (data->policy)
> +			cpufreq_cpu_put(data->policy);
> +	}
> +
> +	return 0;
> +}
> +
>   static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
>   {
>   	int ret = 0, cnt, val, id;
> @@ -452,6 +562,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
>   	/* Register the thermal sensors */
>   	for (id = 0; id < cnt; id++) {
>   		data[id].bgp = bgp;
> +		data[id].sensor_id = id;
>   		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
>   		data[id].stat_offset = data[id].ctrl_offset +
>   					K3_VTM_TMPSENS_STAT_OFFSET;
> @@ -477,6 +588,12 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
>   		writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
>   
>   		bgp->ts_data[id] = &data[id];
> +
> +		if (id == 1)
> +			ret = k3_thermal_register_cpu_cooling(bgp, 1);
> +		if (ret)
> +			goto err_alloc;
> +
>   		ti_thermal = devm_thermal_of_zone_register(bgp->dev, id, &data[id],
>   							   &k3_of_thermal_ops);
>   		if (IS_ERR(ti_thermal)) {
> @@ -514,6 +631,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
>   	return 0;
>   
>   err_free_ref_table:
> +	k3_thermal_unregister_cpu_cooling(bgp, 1);
>   	kfree(ref_table);
>   
>   err_alloc:
> @@ -525,6 +643,9 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
>   
>   static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
>   {
> +	struct k3_j72xx_bandgap *bgp = platform_get_drvdata(pdev);
> +
> +	k3_thermal_unregister_cpu_cooling(bgp, 1);
>   	pm_runtime_put_sync(&pdev->dev);
>   	pm_runtime_disable(&pdev->dev);
>
diff mbox series

Patch

diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
index a5a0fc9b9356..c844cb527761 100644
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -19,6 +19,9 @@ 
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/cpumask.h>
+#include <linux/cpu_cooling.h>
 
 #define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
 #define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
@@ -183,10 +186,28 @@  struct k3_j72xx_bandgap {
 /* common data structures */
 struct k3_thermal_data {
 	struct k3_j72xx_bandgap *bgp;
+	struct cpufreq_policy *policy;
+	struct thermal_zone_device *ti_thermal;
+	struct thermal_cooling_device *cool_dev;
+	struct work_struct thermal_wq;
 	u32 ctrl_offset;
 	u32 stat_offset;
+	enum thermal_device_mode mode;
+	int prev_temp;
+	int sensor_id;
 };
 
+static void k3_thermal_work(struct work_struct *work)
+{
+	struct k3_thermal_data *data = container_of(work,
+					struct k3_thermal_data, thermal_wq);
+
+	thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
+
+	dev_info(&data->ti_thermal->device, "updated thermal zone %s\n",
+		 data->ti_thermal->type);
+}
+
 static int two_cmp(int tmp, int mask)
 {
 	tmp = ~(tmp);
@@ -251,8 +272,40 @@  static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 	return k3_bgp_read_temp(thermal_zone_device_priv(tz), temp);
 }
 
+static int k3_thermal_get_trend(struct thermal_zone_device *tz, int trip, enum thermal_trend *trend)
+{
+	struct k3_thermal_data *data = tz->devdata;
+	struct k3_j72xx_bandgap *bgp;
+	u32 temp1, temp2;
+	int tr, ret = 0;
+
+	bgp = data->bgp;
+
+	ret = k3_thermal_get_temp(tz, &temp1);
+	if (ret)
+		return ret;
+	temp2 = data->prev_temp;
+
+	tr = temp1 - temp2;
+
+	data->prev_temp = temp1;
+
+	if (tr > 0)
+		*trend = THERMAL_TREND_RAISING;
+	else if (tr < 0)
+		*trend = THERMAL_TREND_DROPPING;
+	else
+		*trend = THERMAL_TREND_STABLE;
+
+	dev_dbg(bgp->dev, "The temperatures are t1 = %d and t2 = %d and trend =%d\n",
+		temp1, temp2, *trend);
+
+	return ret;
+}
+
 static const struct thermal_zone_device_ops k3_of_thermal_ops = {
 	.get_temp = k3_thermal_get_temp,
+	.get_trend = k3_thermal_get_trend,
 };
 
 static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
@@ -342,6 +395,63 @@  struct k3_j72xx_bandgap_data {
 	const bool has_errata_i2128;
 };
 
+static int k3_thermal_register_cpu_cooling(struct k3_j72xx_bandgap *bgp, int id)
+{
+	struct k3_thermal_data *data;
+	struct device_node *np = bgp->dev->of_node;
+
+	/*
+	 * We are assuming here that if one deploys the zone
+	 * using DT, then it must be aware that the cooling device
+	 * loading has to happen via cpufreq driver.
+	 */
+	if (of_find_property(np, "#thermal-sensor-cells", NULL))
+		return 0;
+
+	data = bgp->ts_data[id];
+	if (!data)
+		return -EINVAL;
+
+	data->policy = cpufreq_cpu_get(0);
+	if (!data->policy) {
+		pr_debug("%s: CPUFreq policy not found\n", __func__);
+		return -EPROBE_DEFER;
+	}
+
+	/* Register cooling device */
+	data->cool_dev = cpufreq_cooling_register(data->policy);
+	if (IS_ERR(data->cool_dev)) {
+		int ret = PTR_ERR(data->cool_dev);
+
+		dev_err(bgp->dev, "Failed to register cpu cooling device %d\n",
+			ret);
+		cpufreq_cpu_put(data->policy);
+
+		return ret;
+	}
+
+	data->mode = THERMAL_DEVICE_ENABLED;
+
+	INIT_WORK(&data->thermal_wq, k3_thermal_work);
+
+	return 0;
+}
+
+static int k3_thermal_unregister_cpu_cooling(struct k3_j72xx_bandgap *bgp, int id)
+{
+	struct k3_thermal_data *data;
+
+	data = bgp->ts_data[id];
+
+	if (!IS_ERR_OR_NULL(data)) {
+		cpufreq_cooling_unregister(data->cool_dev);
+		if (data->policy)
+			cpufreq_cpu_put(data->policy);
+	}
+
+	return 0;
+}
+
 static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 {
 	int ret = 0, cnt, val, id;
@@ -452,6 +562,7 @@  static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 	/* Register the thermal sensors */
 	for (id = 0; id < cnt; id++) {
 		data[id].bgp = bgp;
+		data[id].sensor_id = id;
 		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
 		data[id].stat_offset = data[id].ctrl_offset +
 					K3_VTM_TMPSENS_STAT_OFFSET;
@@ -477,6 +588,12 @@  static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 		writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
 
 		bgp->ts_data[id] = &data[id];
+
+		if (id == 1)
+			ret = k3_thermal_register_cpu_cooling(bgp, 1);
+		if (ret)
+			goto err_alloc;
+
 		ti_thermal = devm_thermal_of_zone_register(bgp->dev, id, &data[id],
 							   &k3_of_thermal_ops);
 		if (IS_ERR(ti_thermal)) {
@@ -514,6 +631,7 @@  static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_ref_table:
+	k3_thermal_unregister_cpu_cooling(bgp, 1);
 	kfree(ref_table);
 
 err_alloc:
@@ -525,6 +643,9 @@  static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 
 static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
 {
+	struct k3_j72xx_bandgap *bgp = platform_get_drvdata(pdev);
+
+	k3_thermal_unregister_cpu_cooling(bgp, 1);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);