| Message ID | 20230816145741.1472721-4-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | PM: domains: Add control for switching back and forth to HW control | expand |
On 16.08.2023 16:57, Abel Vesa wrote: > From: Jagadeesh Kona <quic_jkona@quicinc.com> > > Add support for set and get hwmode callbacks to switch the GDSC between > SW and HW modes. Currently, the GDSC is moved to HW control mode > using HW_CTRL flag and if this flag is present, GDSC is moved to HW > mode as part of GDSC enable itself. The intention is to keep the > HW_CTRL flag functionality as is, since many older chipsets still use > this flag. > > Introduce a new HW_CTRL_TRIGGER flag to switch the GDSC back and forth > between HW/SW modes dynamically at runtime. If HW_CTRL_TRIGGER flag is > present, register set_hwmode_dev callback to switch the GDSC mode which > can be invoked from consumer drivers using dev_pm_genpd_set_hwmode > function. Unlike HW_CTRL flag, HW_CTRL_TRIGGER won't move the GDSC to HW > control mode as part of GDSC enable itself, GDSC will be moved to HW > control mode only when consumer driver explicity calls > dev_pm_genpd_set_hwmode to switch to HW mode. Also add the > dev_pm_genpd_get_hwmode to allow the consumers to read the actual > HW/SW mode from hardware. > > Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com> > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/clk/qcom/gdsc.c | 32 ++++++++++++++++++++++++++++++++ > drivers/clk/qcom/gdsc.h | 1 + > 2 files changed, 33 insertions(+) > > diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c > index 5358e28122ab..3e4a721f1605 100644 > --- a/drivers/clk/qcom/gdsc.c > +++ b/drivers/clk/qcom/gdsc.c > @@ -363,6 +363,34 @@ static int gdsc_disable(struct generic_pm_domain *domain) > return 0; > } > > +static int gdsc_set_mode(struct generic_pm_domain *domain, struct device *dev, bool mode) > +{ > + struct gdsc *sc = domain_to_gdsc(domain); > + > + if (sc->rsupply && !regulator_is_enabled(sc->rsupply)) { > + pr_err("Cannot set mode while parent is disabled\n"); > + return -EIO; > + } > + > + return gdsc_hwctrl(sc, mode); > +} > + > +static bool gdsc_get_mode(struct generic_pm_domain *domain, struct device *dev) s/mode/hwmode would probably be more descriptive for returning true/false Konrad
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c index 5358e28122ab..3e4a721f1605 100644 --- a/drivers/clk/qcom/gdsc.c +++ b/drivers/clk/qcom/gdsc.c @@ -363,6 +363,34 @@ static int gdsc_disable(struct generic_pm_domain *domain) return 0; } +static int gdsc_set_mode(struct generic_pm_domain *domain, struct device *dev, bool mode) +{ + struct gdsc *sc = domain_to_gdsc(domain); + + if (sc->rsupply && !regulator_is_enabled(sc->rsupply)) { + pr_err("Cannot set mode while parent is disabled\n"); + return -EIO; + } + + return gdsc_hwctrl(sc, mode); +} + +static bool gdsc_get_mode(struct generic_pm_domain *domain, struct device *dev) +{ + struct gdsc *sc = domain_to_gdsc(domain); + u32 val; + int ret; + + ret = regmap_read(sc->regmap, sc->gdscr, &val); + if (ret) + return ret; + + if (val & HW_CONTROL_MASK) + return true; + + return false; +} + static int gdsc_init(struct gdsc *sc) { u32 mask, val; @@ -451,6 +479,10 @@ static int gdsc_init(struct gdsc *sc) sc->pd.power_off = gdsc_disable; if (!sc->pd.power_on) sc->pd.power_on = gdsc_enable; + if (sc->flags & HW_CTRL_TRIGGER) { + sc->pd.set_hwmode_dev = gdsc_set_mode; + sc->pd.get_hwmode_dev = gdsc_get_mode; + } ret = pm_genpd_init(&sc->pd, NULL, !on); if (ret) diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h index 803512688336..1e2779b823d1 100644 --- a/drivers/clk/qcom/gdsc.h +++ b/drivers/clk/qcom/gdsc.h @@ -67,6 +67,7 @@ struct gdsc { #define ALWAYS_ON BIT(6) #define RETAIN_FF_ENABLE BIT(7) #define NO_RET_PERIPH BIT(8) +#define HW_CTRL_TRIGGER BIT(9) struct reset_controller_dev *rcdev; unsigned int *resets; unsigned int reset_count;