diff mbox series

[v3,3/3] thermal: thermal_core: Allow rebooting after critical temp

Message ID 20230828195902.1645169-3-festevam@gmail.com (mailing list archive)
State Superseded, archived
Headers show
Series [v3,1/3] dt-bindings: thermal-zones: Document critical-action | expand

Commit Message

Fabio Estevam Aug. 28, 2023, 7:59 p.m. UTC
From: Fabio Estevam <festevam@denx.de>

Currently, the default mechanism is to trigger a shutdown after the
critical temperature is reached.

In some embedded cases, such behavior does not suit well, as the board may
be unattended in the field and rebooting may be a better approach.

The bootloader may also check the temperature and only allow the boot to
proceed when the temperature is below a certain threshold.

Introduce support for allowing a reboot to be triggered after the
critical temperature is reached.

If the "critical-action" devicetree property is not found, fall back to
the shutdown action to preserve the existing default behavior.

Tested on a i.MX8MM board with the following devicetree changes:

	thermal-zones {
		cpu-thermal {
			critical-action = "reboot";
		};
	};

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v2:
- None.

 drivers/thermal/thermal_core.c |  8 +++++++-
 drivers/thermal/thermal_of.c   | 27 +++++++++++++++++++++++++++
 include/linux/thermal.h        |  6 ++++++
 3 files changed, 40 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index a59700593d32..f69e1667acb1 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -320,11 +320,17 @@  void thermal_zone_device_critical(struct thermal_zone_device *tz)
 	 * Its a must for forced_emergency_poweroff_work to be scheduled.
 	 */
 	int poweroff_delay_ms = CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS;
+	void (*hw_protection_action)(const char *reason, int ms_until_forced);
 
 	dev_emerg(&tz->device, "%s: critical temperature reached, "
 		  "shutting down\n", tz->type);
 
-	hw_protection_shutdown("Temperature too high", poweroff_delay_ms);
+	hw_protection_action = hw_protection_shutdown;
+
+	if (tz->action == THERMAL_CRITICAL_ACTION_REBOOT)
+		hw_protection_action = hw_protection_reboot;
+
+	hw_protection_action("Temperature too high", poweroff_delay_ms);
 }
 EXPORT_SYMBOL(thermal_zone_device_critical);
 
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 4ca905723429..8bc28cba7406 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -218,6 +218,31 @@  static struct device_node *of_thermal_zone_find(struct device_node *sensor, int
 	return tz;
 }
 
+static const char * const critical_actions[] = {
+	[THERMAL_CRITICAL_ACTION_SHUTDOWN]	= "shutdown",
+	[THERMAL_CRITICAL_ACTION_REBOOT]	= "reboot",
+};
+
+static void thermal_of_get_critical_action(struct device_node *np,
+					   enum thermal_action *action)
+{
+	const char *action_string;
+	int i, ret;
+
+	ret = of_property_read_string(np, "critical-action", &action_string);
+	if (ret < 0)
+		goto out_default_action;
+
+	for (i = 0; i < ARRAY_SIZE(critical_actions); i++)
+		if (!strcasecmp(action_string, critical_actions[i])) {
+			*action = i;
+			return;
+		}
+
+out_default_action:
+	*action = THERMAL_CRITICAL_ACTION_SHUTDOWN;
+}
+
 static int thermal_of_monitor_init(struct device_node *np, int *delay, int *pdelay)
 {
 	int ret;
@@ -516,6 +541,8 @@  static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
 		goto out_kfree_trips;
 	}
 
+	thermal_of_get_critical_action(np, &tz->action);
+
 	ret = thermal_zone_device_enable(tz);
 	if (ret) {
 		pr_err("Failed to enabled thermal zone '%s', id=%d: %d\n",
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index b449a46766f5..08854f640db9 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -34,6 +34,11 @@  struct thermal_cooling_device;
 struct thermal_instance;
 struct thermal_attr;
 
+enum thermal_action {
+	THERMAL_CRITICAL_ACTION_SHUTDOWN, /* shutdown when crit temperature is reached */
+	THERMAL_CRITICAL_ACTION_REBOOT, /* reboot when crit temperature is reached */
+};
+
 enum thermal_trend {
 	THERMAL_TREND_STABLE, /* temperature is stable */
 	THERMAL_TREND_RAISING, /* temperature is raising */
@@ -187,6 +192,7 @@  struct thermal_zone_device {
 	struct list_head node;
 	struct delayed_work poll_queue;
 	enum thermal_notify_event notify_event;
+	enum thermal_action action;
 };
 
 /**