diff mbox series

tools/power turbostat: Increase the limit for fd opened

Message ID 20230922092823.478042-1-wyes.karny@amd.com (mailing list archive)
State Superseded, archived
Delegated to: Len Brown
Headers show
Series tools/power turbostat: Increase the limit for fd opened | expand

Commit Message

Wyes Karny Sept. 22, 2023, 9:28 a.m. UTC
When running turbostat, a system with 512 cpus reaches the limit for
maximum number of file descriptors that can be opened. To solve this
problem, the limit is raised to 2^15, which is a large enough number.

Below data is collected from AMD server systems while running turbostat:

|-----------+-------------------------------|
| # of cpus | # of opened fds for turbostat |
|-----------+-------------------------------|
| 128       | 260                           |
|-----------+-------------------------------|
| 192       | 388                           |
|-----------+-------------------------------|
| 512       | 1028                          |
|-----------+-------------------------------|

So, the new max limit would be sufficient up to 2^14 cpus.

Signed-off-by: Wyes Karny <wyes.karny@amd.com>
---
 tools/power/x86/turbostat/turbostat.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Doug Smythies Sept. 22, 2023, 8:48 p.m. UTC | #1
On 2023.09.22 02:28 Wyes Karny wrote:

> When running turbostat, a system with 512 cpus reaches the limit for

Suggest" ... reaches the default limit for..."

> maximum number of file descriptors that can be opened. To solve this
> problem, the limit is raised to 2^15, which is a large enough number.
>
> Below data is collected from AMD server systems while running turbostat:
>
> |-----------+-------------------------------|
> | # of cpus | # of opened fds for turbostat |
> |-----------+-------------------------------|
> | 128       | 260                           |
> |-----------+-------------------------------|
> | 192       | 388                           |
> |-----------+-------------------------------|
> | 512       | 1028                          |
> |-----------+-------------------------------|

The number of open files is a function of what is being "show"ed or "hide"en.
They can also increase beyond the above 2 X (# of CPUs) + 4 number
via the --add directive. 
>
> So, the new max limit would be sufficient up to 2^14 cpus.

Well, not quiet, but the point is valid.

Normally, I would assume that a server with a large number of
CPUs would have set a much higher limit of the number of open
files than the default. I use 131,072 and so this patch reduces the
maximum.

Unpatched:
root@s19:~# cat /proc/47043/limits | grep "Max open files"
Max open files            131072               131072               files

Patched:
root@s19:~# cat /proc/47032/limits | grep "Max open files"
Max open files            32768                32768                files

Anyway:

Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>

>
> Signed-off-by: Wyes Karny <wyes.karny@amd.com>
> ---
>  tools/power/x86/turbostat/turbostat.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
> index 9a10512e3407..23f1fe58289a 100644
> --- a/tools/power/x86/turbostat/turbostat.c
> +++ b/tools/power/x86/turbostat/turbostat.c
> @@ -6717,6 +6717,18 @@ void cmdline(int argc, char **argv)
>       }
>  }
>
> +void set_rlimit(void)
> +{
> +     struct rlimit limit;
> +
> +     limit.rlim_cur = 0x8000;
> +     limit.rlim_max = 0x8000;
> +
> +     if (setrlimit(RLIMIT_NOFILE, &limit) < 0) {
> +             err(1, "Failed to set rlimit");
> +     }
> +}
> +
>  int main(int argc, char **argv)
>  {
>       outf = stderr;
> @@ -6729,6 +6741,9 @@ int main(int argc, char **argv)
>
>       probe_sysfs();
>
> +     if (!getuid())
> +             set_rlimit();
> +
>       turbostat_init();
>
>       msr_sum_record();
> --
> 2.34.1
>
Wyes Karny Sept. 27, 2023, 5:16 a.m. UTC | #2
Hi Doug,

Thanks for taking a look at the patch.

On 22 Sep 13:48, Doug Smythies wrote:
> On 2023.09.22 02:28 Wyes Karny wrote:
> 
> > When running turbostat, a system with 512 cpus reaches the limit for
> 
> Suggest" ... reaches the default limit for..."
> 
> > maximum number of file descriptors that can be opened. To solve this
> > problem, the limit is raised to 2^15, which is a large enough number.
> >
> > Below data is collected from AMD server systems while running turbostat:
> >
> > |-----------+-------------------------------|
> > | # of cpus | # of opened fds for turbostat |
> > |-----------+-------------------------------|
> > | 128       | 260                           |
> > |-----------+-------------------------------|
> > | 192       | 388                           |
> > |-----------+-------------------------------|
> > | 512       | 1028                          |
> > |-----------+-------------------------------|
> 
> The number of open files is a function of what is being "show"ed or "hide"en.
> They can also increase beyond the above 2 X (# of CPUs) + 4 number
> via the --add directive. 
> >
> > So, the new max limit would be sufficient up to 2^14 cpus.
> 
> Well, not quiet, but the point is valid.
> 
> Normally, I would assume that a server with a large number of
> CPUs would have set a much higher limit of the number of open
> files than the default. I use 131,072 and so this patch reduces the
> maximum.

I think below will fix the problem.

+#define MAX_NOFILE 0x8000
+
+void set_rlimit(void)
+{
+       struct rlimit limit;
+
+       if(getrlimit(RLIMIT_NOFILE, &limit) < 0) {
+               err(1, "Failed to get rlimit");
+       }
+
+       if (limit.rlim_max < MAX_NOFILE)
+               limit.rlim_max = MAX_NOFILE;
+       if (limit.rlim_cur < MAX_NOFILE)
+               limit.rlim_cur = MAX_NOFILE;
+
+       if (setrlimit(RLIMIT_NOFILE, &limit) < 0) {
+               err(1, "Failed to set rlimit");
+       }
+       return;
+}


Is this looks okay to you?

Thanks,
Wyes
> 
> Unpatched:
> root@s19:~# cat /proc/47043/limits | grep "Max open files"
> Max open files            131072               131072               files
> 
> Patched:
> root@s19:~# cat /proc/47032/limits | grep "Max open files"
> Max open files            32768                32768                files
> 
> Anyway:
> 
> Reviewed-by: Doug Smythies <dsmythies@telus.net>
> Tested-by: Doug Smythies <dsmythies@telus.net>
> 
> >
> > Signed-off-by: Wyes Karny <wyes.karny@amd.com>
> > ---
> >  tools/power/x86/turbostat/turbostat.c | 15 +++++++++++++++
> >  1 file changed, 15 insertions(+)
> >
> > diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
> > index 9a10512e3407..23f1fe58289a 100644
> > --- a/tools/power/x86/turbostat/turbostat.c
> > +++ b/tools/power/x86/turbostat/turbostat.c
> > @@ -6717,6 +6717,18 @@ void cmdline(int argc, char **argv)
> >       }
> >  }
> >
> > +void set_rlimit(void)
> > +{
> > +     struct rlimit limit;
> > +
> > +     limit.rlim_cur = 0x8000;
> > +     limit.rlim_max = 0x8000;
> > +
> > +     if (setrlimit(RLIMIT_NOFILE, &limit) < 0) {
> > +             err(1, "Failed to set rlimit");
> > +     }
> > +}
> > +
> >  int main(int argc, char **argv)
> >  {
> >       outf = stderr;
> > @@ -6729,6 +6741,9 @@ int main(int argc, char **argv)
> >
> >       probe_sysfs();
> >
> > +     if (!getuid())
> > +             set_rlimit();
> > +
> >       turbostat_init();
> >
> >       msr_sum_record();
> > --
> > 2.34.1
> >
>
Doug Smythies Sept. 29, 2023, 3:32 p.m. UTC | #3
Hi Wyes,

On 2023.09.26 10:16 Wyes Karny wrote:
> On 22 Sep 13:48, Doug Smythies wrote:
> > On 2023.09.22 02:28 Wyes Karny wrote:
> >
> > > When running turbostat, a system with 512 cpus reaches the limit for
> >
> > Suggest" ... reaches the default limit for..."
> >
> > > maximum number of file descriptors that can be opened. To solve this
> > > problem, the limit is raised to 2^15, which is a large enough number.
> > >
> > > Below data is collected from AMD server systems while running turbostat:
> > >
> > > |-----------+-------------------------------|
> > > | # of cpus | # of opened fds for turbostat |
> > > |-----------+-------------------------------|
> > > | 128       | 260                           |
> > > |-----------+-------------------------------|
> > > | 192       | 388                           |
> > > |-----------+-------------------------------|
> > > | 512       | 1028                          |
> > > |-----------+-------------------------------|
> >
> > The number of open files is a function of what is being "show"ed or "hide"en.
> > They can also increase beyond the above 2 X (# of CPUs) + 4 number
> > via the --add directive.
> > >
> > > So, the new max limit would be sufficient up to 2^14 cpus.
> >
> > Well, not quiet, but the point is valid.
> >
> > Normally, I would assume that a server with a large number of
> > CPUs would have set a much higher limit of the number of open
> > files than the default. I use 131,072 and so this patch reduces the
> > maximum.
>
> I think below will fix the problem.
>
> +#define MAX_NOFILE 0x8000
> +
> +void set_rlimit(void)
> +{
> +       struct rlimit limit;
> +
> +       if(getrlimit(RLIMIT_NOFILE, &limit) < 0) {
> +               err(1, "Failed to get rlimit");
> +       }
> +
> +       if (limit.rlim_max < MAX_NOFILE)
> +               limit.rlim_max = MAX_NOFILE;
> +       if (limit.rlim_cur < MAX_NOFILE)
> +               limit.rlim_cur = MAX_NOFILE;
> +
> +       if (setrlimit(RLIMIT_NOFILE, &limit) < 0) {
> +               err(1, "Failed to set rlimit");
> +       }
> +       return;
> +}
>
> Is this looks okay to you?

Either the original or the above is fine.
I was just being nit-picky and annoying is all.
I still added a "Reviewed-by" below.

... Doug

> Thanks,
> Wyes
> >
> > Unpatched:
> > root@s19:~# cat /proc/47043/limits | grep "Max open files"
> > Max open files            131072               131072               files
> >
> > Patched:
> > root@s19:~# cat /proc/47032/limits | grep "Max open files"
> > Max open files            32768                32768                files
> >
> > Anyway:
> >
> > Reviewed-by: Doug Smythies <dsmythies@telus.net>
> > Tested-by: Doug Smythies <dsmythies@telus.net>
> >
> > >
> > > Signed-off-by: Wyes Karny <wyes.karny@amd.com>
> > > ---
> > >  tools/power/x86/turbostat/turbostat.c | 15 +++++++++++++++
> > >  1 file changed, 15 insertions(+)
> > >
> > > diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
> > > index 9a10512e3407..23f1fe58289a 100644
> > > --- a/tools/power/x86/turbostat/turbostat.c
> > > +++ b/tools/power/x86/turbostat/turbostat.c
> > > @@ -6717,6 +6717,18 @@ void cmdline(int argc, char **argv)
> > >       }
> > >  }
> > >
> > > +void set_rlimit(void)
> > > +{
> > > +     struct rlimit limit;
> > > +
> > > +     limit.rlim_cur = 0x8000;
> > > +     limit.rlim_max = 0x8000;
> > > +
> > > +     if (setrlimit(RLIMIT_NOFILE, &limit) < 0) {
> > > +             err(1, "Failed to set rlimit");
> > > +     }
> > > +}
> > > +
> > >  int main(int argc, char **argv)
> > >  {
> > >       outf = stderr;
> > > @@ -6729,6 +6741,9 @@ int main(int argc, char **argv)
> > >
> > >       probe_sysfs();
> > >
> > > +     if (!getuid())
> > > +             set_rlimit();
> > > +
> > >       turbostat_init();
> > >
> > >       msr_sum_record();
> > > --
> > > 2.34.1
diff mbox series

Patch

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 9a10512e3407..23f1fe58289a 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -6717,6 +6717,18 @@  void cmdline(int argc, char **argv)
 	}
 }
 
+void set_rlimit(void)
+{
+	struct rlimit limit;
+
+	limit.rlim_cur = 0x8000;
+	limit.rlim_max = 0x8000;
+
+	if (setrlimit(RLIMIT_NOFILE, &limit) < 0) {
+		err(1, "Failed to set rlimit");
+	}
+}
+
 int main(int argc, char **argv)
 {
 	outf = stderr;
@@ -6729,6 +6741,9 @@  int main(int argc, char **argv)
 
 	probe_sysfs();
 
+	if (!getuid())
+		set_rlimit();
+
 	turbostat_init();
 
 	msr_sum_record();