| Message ID | 20230928210525.1265958-2-robimarko@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | viresh kumar |
| Headers | show |
| Series | [v4,1/4] cpufreq: qcom-nvmem: add support for IPQ8074 | expand |
On Thu, 28 Sep 2023 23:04:05 +0200, Robert Marko wrote: > From: Christian Marangi <ansuelsmth@gmail.com> > > Document named opp-microvolt property for opp-v2-kryo-cpu schema. > This property is used to declare multiple voltage ranges selected on the > different values read from efuses. The selection is done based on the > speed pvs values and the named opp-microvolt property is selected by the > qcom-cpufreq-nvmem driver. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > Signed-off-by: Robert Marko <robimarko@gmail.com> > --- > Changes in v4: > * Describe PVS > * Add description for opp-microvolt entries > --- > .../bindings/opp/opp-v2-kryo-cpu.yaml | 38 +++++++++++++++++++ > 1 file changed, 38 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml: patternProperties:^opp-?[0-9]+$:patternProperties:^opp-microvolt-speed[0-9]+-pvs[0-9]+$: {'description': 'Named opp-microvolt property following the same generic\nbinding for named opp-microvolt.\n\nThe correct voltage range is selected based on the values\nin the efuse for the speed and the pvs (power variable\nscaling).\n', 'minItems': 1, 'maxItems': 4, 'items': [{'description': 'nominal voltage'}, {'description': 'minimum voltage'}, {'description': 'maximum voltage'}]} should not be valid under {'required': ['maxItems']} hint: "maxItems" is not needed with an "items" list from schema $id: http://devicetree.org/meta-schemas/items.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230928210525.1265958-2-robimarko@gmail.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml index bbbad31ae4ca..f1b4553fd66a 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml @@ -63,6 +63,12 @@ patternProperties: 5: MSM8996SG, speedbin 1 6: MSM8996SG, speedbin 2 7-31: unused + + Bitmap for IPQ806X SoC: + 0: IPQ8062 + 1: IPQ8064/IPQ8066/IPQ8068 + 2: IPQ8065/IPQ8069 + 3-31: unused enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x9, 0xd, 0xe, 0xf, 0x10, 0x20, 0x30, 0x70] @@ -71,6 +77,22 @@ patternProperties: required-opps: true + patternProperties: + '^opp-microvolt-speed[0-9]+-pvs[0-9]+$': + description: | + Named opp-microvolt property following the same generic + binding for named opp-microvolt. + + The correct voltage range is selected based on the values + in the efuse for the speed and the pvs (power variable + scaling). + minItems: 1 + maxItems: 4 # Up to 4 regulators: Core, Mem, Dig and HFPLL + items: + - description: nominal voltage + - description: minimum voltage + - description: maximum voltage + required: - opp-hz @@ -256,6 +278,22 @@ examples: }; }; + /* Dummy opp table to give example for named opp-microvolt */ + opp-table-2 { + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&speedbin_efuse>; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt-speed0-pvs0 = <1000000 950000 1050000>; + opp-microvolt-speed0-pvs1 = <925000 878750 971250>; + opp-microvolt-speed0-pvs2 = <875000 831250 918750>; + opp-microvolt-speed0-pvs3 = <800000 760000 840000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <100000>; + }; + }; + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>;