diff mbox series

[v3.1,8/8] dt-bindings: mfd: dlg,da9063: Convert da9062 to json-schema

Message ID 20231204172510.35041-9-biju.das.jz@bp.renesas.com (mailing list archive)
State New, archived
Delegated to: Daniel Lezcano
Headers show
Series Convert DA906{1,2} bindings to json-schema | expand

Commit Message

Biju Das Dec. 4, 2023, 5:25 p.m. UTC
Convert the da9062 PMIC device tree binding documentation to json-schema.

Update the example to match reality.

While at it, update description with link to product information.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v3->v3.1:
 * Split the thermal binding patch separate.
 * Updated the description.
v2->v3:
 * Fixed bot errors related to MAINTAINERS entry, invalid doc
   references and thermal examples by merging patch#4.
v2:
 * New patch
---
 .../bindings/input/dlg,da9062-onkey.yaml      |   3 +-
 .../devicetree/bindings/mfd/da9062.txt        | 124 ------------
 .../devicetree/bindings/mfd/dlg,da9063.yaml   | 186 +++++++++++++++++-
 .../bindings/thermal/dlg,da9062-thermal.yaml  |   2 +-
 4 files changed, 183 insertions(+), 132 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/da9062.txt

Comments

Conor Dooley Dec. 5, 2023, 5:12 p.m. UTC | #1
On Mon, Dec 04, 2023 at 05:25:10PM +0000, Biju Das wrote:

> @@ -60,8 +85,65 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - interrupts
> -  - interrupt-controller
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - dlg,da9063
> +              - dlg,da9063l
> +    then:
> +      properties:
> +        thermal: false
> +        gpio: false
> +        gpio-controller: false
> +        "#gpio-cells": false
> +        regulators:
> +          patternProperties:
> +            "^buck[1-4]$": false
> +      required:
> +        - interrupts
> +        - interrupt-controller
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - dlg,da9062
> +    then:
> +      properties:
> +        regulators:
> +          patternProperties:
> +            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
> +      required:
> +        - gpio
> +        - onkey
> +        - rtc
> +        - thermal
> +        - watchdog

Why are these required for the 9062 (and another set for the 9061)?
The original binding does not seem to require them, nor does the yaml
binding for the 9063.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - dlg,da9061
> +    then:
> +      properties:
> +        gpio: false
> +        gpio-controller: false
> +        "#gpio-cells": false
> +        regulators:
> +          patternProperties:
> +            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
> +        rtc: false
> +      required:
> +        - onkey
> +        - thermal
> +        - watchdog
>  
>  additionalProperties: false
>  
> @@ -118,4 +200,98 @@ examples:
>          };
>        };
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      pmic@58 {
> +        compatible = "dlg,da9062";
> +        reg = <0x58>;
> +        #interrupt-cells = <2>;
> +        interrupt-parent = <&gpio1>;
> +        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +        interrupt-controller;
> +
> +        gpio {
> +          compatible = "dlg,da9062-gpio";
> +          status = "disabled";

Why add it disabled? This should be enabled IMO.

> +        rtc {
> +          compatible = "dlg,da9062-rtc";
> +          status = "disabled";
> +        };
> +
> +        thermal {
> +          compatible = "dlg,da9062-thermal";
> +          status = "disabled";
> +        };

Ditto for these.

Thanks,
Conor.
Biju Das Dec. 5, 2023, 6:52 p.m. UTC | #2
Hi Conor Dooley,

Thanks for the feedback.

> -----Original Message-----
> From: Conor Dooley <conor@kernel.org>
> Sent: Tuesday, December 5, 2023 5:12 PM
> Subject: Re: [PATCH v3.1 8/8] dt-bindings: mfd: dlg,da9063: Convert da9062
> to json-schema
> 
> On Mon, Dec 04, 2023 at 05:25:10PM +0000, Biju Das wrote:
> 
> > @@ -60,8 +85,65 @@ properties:
> >  required:
> >    - compatible
> >    - reg
> > -  - interrupts
> > -  - interrupt-controller
> > +
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - dlg,da9063
> > +              - dlg,da9063l
> > +    then:
> > +      properties:
> > +        thermal: false
> > +        gpio: false
> > +        gpio-controller: false
> > +        "#gpio-cells": false
> > +        regulators:
> > +          patternProperties:
> > +            "^buck[1-4]$": false
> > +      required:
> > +        - interrupts
> > +        - interrupt-controller
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - dlg,da9062
> > +    then:
> > +      properties:
> > +        regulators:
> > +          patternProperties:
> > +            "^(ldo([5-9]|10|11)|bcore([1-2]|s-
> merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
> > +      required:
> > +        - gpio
> > +        - onkey
> > +        - rtc
> > +        - thermal
> > +        - watchdog
> 
> Why are these required for the 9062 (and another set for the 9061)?
> The original binding does not seem to require them, nor does the yaml
> binding for the 9063.

The core drivers for 9063 and 9062 devices are different. Absence of child node using da9062 core driver
is giving error messages like (eg: da9062-gpio: Failed to locate of_node [id: -1]).

So, Geert suggested to make them as required one[1]

[1]
https://patchwork.kernel.org/project/linux-renesas-soc/patch/20231201110840.37408-6-biju.das.jz@bp.renesas.com/


> 
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - dlg,da9061
> > +    then:
> > +      properties:
> > +        gpio: false
> > +        gpio-controller: false
> > +        "#gpio-cells": false
> > +        regulators:
> > +          patternProperties:
> > +            "^(ldo([5-9]|10|11)|bcore([1-2]|s-
> merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
> > +        rtc: false
> > +      required:
> > +        - onkey
> > +        - thermal
> > +        - watchdog
> >
> >  additionalProperties: false
> >
> > @@ -118,4 +200,98 @@ examples:
> >          };
> >        };
> >      };
> > +
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      pmic@58 {
> > +        compatible = "dlg,da9062";
> > +        reg = <0x58>;
> > +        #interrupt-cells = <2>;
> > +        interrupt-parent = <&gpio1>;
> > +        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> > +        interrupt-controller;
> > +
> > +        gpio {
> > +          compatible = "dlg,da9062-gpio";
> > +          status = "disabled";
> 
> Why add it disabled? This should be enabled IMO.

Same as above.

Cheers,
Biju

> 
> > +        rtc {
> > +          compatible = "dlg,da9062-rtc";
> > +          status = "disabled";
> > +        };
> > +
> > +        thermal {
> > +          compatible = "dlg,da9062-thermal";
> > +          status = "disabled";
> > +        };
> 
> Ditto for these.
> 
> Thanks,
> Conor.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
index 4cff91f4bd34..18b6a3f02c07 100644
--- a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
@@ -11,8 +11,7 @@  maintainers:
 
 description: |
   This module is part of the DA9061/DA9062/DA9063. For more details about entire
-  DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-  For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+  DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
 
   This module provides the KEY_POWER event.
 
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
deleted file mode 100644
index c8a7f119ac84..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,124 +0,0 @@ 
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/dlg,da9062-onkey.yaml
-
-- watchdog: See ../watchdog/dlg,da9062-watchdog.yaml
-
-- thermal : See ../thermal/dlg,da9062-thermal.yaml
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
index 676b4f2566ae..54bb23dbc73f 100644
--- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -4,7 +4,7 @@ 
 $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
 
 maintainers:
   - Steve Twiss <stwiss.opensource@diasemi.com>
@@ -17,10 +17,17 @@  description: |
   moment where all voltage monitors are disabled. Next, as da9063 only supports
   UV *and* OV monitoring, both must be set to the same severity and value
   (0: disable, 1: enable).
+  Product information for the DA906{3L,3,2,1} devices can be found here:
+  - https://www.dialog-semiconductor.com/products/da9063l
+  - https://www.dialog-semiconductor.com/products/da9063
+  - https://www.dialog-semiconductor.com/products/da9062
+  - https://www.dialog-semiconductor.com/products/da9061
 
 properties:
   compatible:
     enum:
+      - dlg,da9061
+      - dlg,da9062
       - dlg,da9063
       - dlg,da9063l
 
@@ -35,6 +42,19 @@  properties:
   "#interrupt-cells":
     const: 2
 
+  gpio:
+    type: object
+    $ref: /schemas/gpio/gpio.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9062-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
   onkey:
     $ref: /schemas/input/dlg,da9062-onkey.yaml
 
@@ -42,7 +62,7 @@  properties:
     type: object
     additionalProperties: false
     patternProperties:
-      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
         $ref: /schemas/regulator/regulator.yaml
         unevaluatedProperties: false
 
@@ -52,7 +72,12 @@  properties:
     unevaluatedProperties: false
     properties:
       compatible:
-        const: dlg,da9063-rtc
+        enum:
+          - dlg,da9063-rtc
+          - dlg,da9062-rtc
+
+  thermal:
+    $ref: /schemas/thermal/dlg,da9062-thermal.yaml
 
   watchdog:
     $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
@@ -60,8 +85,65 @@  properties:
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9063
+              - dlg,da9063l
+    then:
+      properties:
+        thermal: false
+        gpio: false
+        gpio-controller: false
+        "#gpio-cells": false
+        regulators:
+          patternProperties:
+            "^buck[1-4]$": false
+      required:
+        - interrupts
+        - interrupt-controller
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9062
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+      required:
+        - gpio
+        - onkey
+        - rtc
+        - thermal
+        - watchdog
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9061
+    then:
+      properties:
+        gpio: false
+        gpio-controller: false
+        "#gpio-cells": false
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+        rtc: false
+      required:
+        - onkey
+        - thermal
+        - watchdog
 
 additionalProperties: false
 
@@ -118,4 +200,98 @@  examples:
         };
       };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9062";
+        reg = <0x58>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+
+        gpio {
+          compatible = "dlg,da9062-gpio";
+          status = "disabled";
+        };
+
+        onkey {
+          compatible = "dlg,da9062-onkey";
+        };
+
+        regulators {
+          buck1 {
+            regulator-name = "vdd_arm";
+            regulator-min-microvolt = <925000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck2 {
+            regulator-name = "vdd_soc";
+            regulator-min-microvolt = <1150000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "vdd_ddr3";
+            regulator-min-microvolt = <1500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "vdd_eth";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          ldo1 {
+            regulator-name = "vdd_snvs";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo2 {
+            regulator-name = "vdd_high";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo3 {
+            regulator-name = "vdd_eth_io";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+          ldo4 {
+            regulator-name = "vdd_emmc";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+
+        rtc {
+          compatible = "dlg,da9062-rtc";
+          status = "disabled";
+        };
+
+        thermal {
+          compatible = "dlg,da9062-thermal";
+          status = "disabled";
+        };
+
+        watchdog {
+          compatible = "dlg,da9062-watchdog";
+          dlg,use-sw-pm;
+        };
+      };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
index 206635f74850..e8b2cac41084 100644
--- a/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/dlg,da9062-thermal.yaml
@@ -11,7 +11,7 @@  maintainers:
 
 description: |
   This module is part of the DA9061/DA9062. For more details about entire
-  DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
+  DA906{1,2} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
 
   Junction temperature thermal module uses an interrupt signal to identify
   high THERMAL_TRIP_HOT temperatures for the PMIC device.