diff mbox series

[2/5] thermal: gov_power_allocator: Refactor check_power_actors()

Message ID 20231206113138.3576492-3-lukasz.luba@arm.com (mailing list archive)
State Changes Requested, archived
Headers show
Series Add callback for cooling list update to speed-up IPA | expand

Commit Message

Lukasz Luba Dec. 6, 2023, 11:31 a.m. UTC
Refactor check_power_actors() to make it possible for re-use in the
upcoming new callback.

No intentional functional impact.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
 drivers/thermal/gov_power_allocator.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Comments

Rafael J. Wysocki Dec. 20, 2023, 2:07 p.m. UTC | #1
On Wed, Dec 6, 2023 at 12:30 PM Lukasz Luba <lukasz.luba@arm.com> wrote:
>
> Refactor check_power_actors() to make it possible for re-use in the
> upcoming new callback.

I would say "In preparation for a subsequent change, rearrange
check_power_actors()".
>
> No intentional functional impact.
>
> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
> ---
>  drivers/thermal/gov_power_allocator.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
> index 785fff14223d..38e1e89ba10c 100644
> --- a/drivers/thermal/gov_power_allocator.c
> +++ b/drivers/thermal/gov_power_allocator.c
> @@ -581,8 +581,9 @@ static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
>   * power actor API. The warning should help to investigate the issue, which
>   * could be e.g. lack of Energy Model for a given device.
>   *
> - * Return: 0 on success, -EINVAL if any cooling device does not implement
> - * the power actor API.
> + * Return number of cooling devices or -EINVAL if any cooling device does not
> + * implement the power actor API. Return value 0 is also valid since cooling
> + * devices might be attached later.

I would say "If all of the cooling devices currently attached to @tz
implement the power actor API, return the number of them (which may be
0, because some cooling devices may be attached later).  Otherwise,
return -EINVAL."

>   */
>  static int check_power_actors(struct thermal_zone_device *tz,
>                               struct power_allocator_params *params)
> @@ -597,8 +598,9 @@ static int check_power_actors(struct thermal_zone_device *tz,
>                 if (!cdev_is_power_actor(instance->cdev)) {
>                         dev_warn(&tz->device, "power_allocator: %s is not a power actor\n",
>                                  instance->cdev->type);
> -                       ret = -EINVAL;
> +                       return -EINVAL;
>                 }
> +               ret++;
>         }
>
>         return ret;
> @@ -631,7 +633,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
>         }
>
>         ret = check_power_actors(tz, params);
> -       if (ret) {
> +       if (ret < 0) {
>                 dev_warn(&tz->device, "power_allocator: binding failed\n");
>                 kfree(params);
>                 return ret;
> --
Lukasz Luba Dec. 20, 2023, 4:29 p.m. UTC | #2
On 12/20/23 14:07, Rafael J. Wysocki wrote:
> On Wed, Dec 6, 2023 at 12:30 PM Lukasz Luba <lukasz.luba@arm.com> wrote:
>>
>> Refactor check_power_actors() to make it possible for re-use in the
>> upcoming new callback.
> 
> I would say "In preparation for a subsequent change, rearrange
> check_power_actors()".

Agree, I'll use it.

>>
>> No intentional functional impact.
>>
>> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
>> ---
>>   drivers/thermal/gov_power_allocator.c | 10 ++++++----
>>   1 file changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
>> index 785fff14223d..38e1e89ba10c 100644
>> --- a/drivers/thermal/gov_power_allocator.c
>> +++ b/drivers/thermal/gov_power_allocator.c
>> @@ -581,8 +581,9 @@ static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
>>    * power actor API. The warning should help to investigate the issue, which
>>    * could be e.g. lack of Energy Model for a given device.
>>    *
>> - * Return: 0 on success, -EINVAL if any cooling device does not implement
>> - * the power actor API.
>> + * Return number of cooling devices or -EINVAL if any cooling device does not
>> + * implement the power actor API. Return value 0 is also valid since cooling
>> + * devices might be attached later.
> 
> I would say "If all of the cooling devices currently attached to @tz
> implement the power actor API, return the number of them (which may be
> 0, because some cooling devices may be attached later).  Otherwise,
> return -EINVAL."
> 

Yes, I'll use that sentence as well.
Those will be in the next version (v3). Thanks!
diff mbox series

Patch

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 785fff14223d..38e1e89ba10c 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -581,8 +581,9 @@  static void allow_maximum_power(struct thermal_zone_device *tz, bool update)
  * power actor API. The warning should help to investigate the issue, which
  * could be e.g. lack of Energy Model for a given device.
  *
- * Return: 0 on success, -EINVAL if any cooling device does not implement
- * the power actor API.
+ * Return number of cooling devices or -EINVAL if any cooling device does not
+ * implement the power actor API. Return value 0 is also valid since cooling
+ * devices might be attached later.
  */
 static int check_power_actors(struct thermal_zone_device *tz,
 			      struct power_allocator_params *params)
@@ -597,8 +598,9 @@  static int check_power_actors(struct thermal_zone_device *tz,
 		if (!cdev_is_power_actor(instance->cdev)) {
 			dev_warn(&tz->device, "power_allocator: %s is not a power actor\n",
 				 instance->cdev->type);
-			ret = -EINVAL;
+			return -EINVAL;
 		}
+		ret++;
 	}
 
 	return ret;
@@ -631,7 +633,7 @@  static int power_allocator_bind(struct thermal_zone_device *tz)
 	}
 
 	ret = check_power_actors(tz, params);
-	if (ret) {
+	if (ret < 0) {
 		dev_warn(&tz->device, "power_allocator: binding failed\n");
 		kfree(params);
 		return ret;