diff mbox series

[2/3] firmware: arm_scmi: Add perf_opp_xlate interface

Message ID 20240108140118.1596-3-quic_sibis@quicinc.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series firmware: arm_scmi: Register and handle limits change notification | expand

Commit Message

Sibi Sankar Jan. 8, 2024, 2:01 p.m. UTC
Add a new perf_opp_xlate interface to the existing perf_ops to translate
a given perf index to frequency.

This can be used by the cpufreq driver and framework to determine the
throttled frequency from a given perf index and apply HW pressure
accordingly.

Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
---
 drivers/firmware/arm_scmi/perf.c | 21 +++++++++++++++++++++
 include/linux/scmi_protocol.h    |  3 +++
 2 files changed, 24 insertions(+)

Comments

Viresh Kumar Jan. 10, 2024, 7:29 a.m. UTC | #1
On 08-01-24, 19:31, Sibi Sankar wrote:
> Add a new perf_opp_xlate interface to the existing perf_ops to translate
> a given perf index to frequency.
> 
> This can be used by the cpufreq driver and framework to determine the
> throttled frequency from a given perf index and apply HW pressure
> accordingly.
> 
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> ---
>  drivers/firmware/arm_scmi/perf.c | 21 +++++++++++++++++++++
>  include/linux/scmi_protocol.h    |  3 +++
>  2 files changed, 24 insertions(+)
> 
> diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
> index c167bb5e3607..f26390924e1c 100644
> --- a/drivers/firmware/arm_scmi/perf.c
> +++ b/drivers/firmware/arm_scmi/perf.c
> @@ -964,6 +964,26 @@ static int scmi_notify_support(const struct scmi_protocol_handle *ph, u32 domain
>  	return 0;
>  }
>  
> +static int scmi_perf_opp_xlate(const struct scmi_protocol_handle *ph, u32 domain,
> +			       int idx, unsigned long *freq)
> +{
> +	struct perf_dom_info *dom;
> +
> +	dom = scmi_perf_domain_lookup(ph, domain);
> +	if (IS_ERR(dom))
> +		return PTR_ERR(dom);
> +
> +	if (idx >= dom->opp_count)
> +		return -ERANGE;
> +
> +	if (!dom->level_indexing_mode)
> +		*freq = dom->opp[idx].perf * dom->mult_factor;
> +	else
> +		*freq = dom->opp[idx].indicative_freq * dom->mult_factor;
> +
> +	return 0;
> +}
> +
>  static const struct scmi_perf_proto_ops perf_proto_ops = {
>  	.num_domains_get = scmi_perf_num_domains_get,
>  	.info_get = scmi_perf_info_get,
> @@ -979,6 +999,7 @@ static const struct scmi_perf_proto_ops perf_proto_ops = {
>  	.fast_switch_possible = scmi_fast_switch_possible,
>  	.power_scale_get = scmi_power_scale_get,
>  	.perf_notify_support = scmi_notify_support,
> +	.perf_opp_xlate = scmi_perf_opp_xlate,

The use of "opp" here is a bit confusing as this doesn't have anything to do
with the OPP framework and you are only getting the frequency out of it after
all.
Sibi Sankar Jan. 17, 2024, 2:59 a.m. UTC | #2
On 1/10/24 12:59, Viresh Kumar wrote:
> On 08-01-24, 19:31, Sibi Sankar wrote:
>> Add a new perf_opp_xlate interface to the existing perf_ops to translate
>> a given perf index to frequency.
>>

Hey Viresh,
Thanks for taking time to review the series!

>> This can be used by the cpufreq driver and framework to determine the
>> throttled frequency from a given perf index and apply HW pressure
>> accordingly.
>>
>> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
>> ---
>>   drivers/firmware/arm_scmi/perf.c | 21 +++++++++++++++++++++
>>   include/linux/scmi_protocol.h    |  3 +++
>>   2 files changed, 24 insertions(+)
>>
>> diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
>> index c167bb5e3607..f26390924e1c 100644
>> --- a/drivers/firmware/arm_scmi/perf.c
>> +++ b/drivers/firmware/arm_scmi/perf.c
>> @@ -964,6 +964,26 @@ static int scmi_notify_support(const struct scmi_protocol_handle *ph, u32 domain
>>   	return 0;
>>   }
>>   
>> +static int scmi_perf_opp_xlate(const struct scmi_protocol_handle *ph, u32 domain,
>> +			       int idx, unsigned long *freq)
>> +{
>> +	struct perf_dom_info *dom;
>> +
>> +	dom = scmi_perf_domain_lookup(ph, domain);
>> +	if (IS_ERR(dom))
>> +		return PTR_ERR(dom);
>> +
>> +	if (idx >= dom->opp_count)
>> +		return -ERANGE;
>> +
>> +	if (!dom->level_indexing_mode)
>> +		*freq = dom->opp[idx].perf * dom->mult_factor;
>> +	else
>> +		*freq = dom->opp[idx].indicative_freq * dom->mult_factor;
>> +
>> +	return 0;
>> +}
>> +
>>   static const struct scmi_perf_proto_ops perf_proto_ops = {
>>   	.num_domains_get = scmi_perf_num_domains_get,
>>   	.info_get = scmi_perf_info_get,
>> @@ -979,6 +999,7 @@ static const struct scmi_perf_proto_ops perf_proto_ops = {
>>   	.fast_switch_possible = scmi_fast_switch_possible,
>>   	.power_scale_get = scmi_power_scale_get,
>>   	.perf_notify_support = scmi_notify_support,
>> +	.perf_opp_xlate = scmi_perf_opp_xlate,
> 
> The use of "opp" here is a bit confusing as this doesn't have anything to do
> with the OPP framework and you are only getting the frequency out of it after
> all.

Sure will re-name it.

-Sibi

>
diff mbox series

Patch

diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index c167bb5e3607..f26390924e1c 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -964,6 +964,26 @@  static int scmi_notify_support(const struct scmi_protocol_handle *ph, u32 domain
 	return 0;
 }
 
+static int scmi_perf_opp_xlate(const struct scmi_protocol_handle *ph, u32 domain,
+			       int idx, unsigned long *freq)
+{
+	struct perf_dom_info *dom;
+
+	dom = scmi_perf_domain_lookup(ph, domain);
+	if (IS_ERR(dom))
+		return PTR_ERR(dom);
+
+	if (idx >= dom->opp_count)
+		return -ERANGE;
+
+	if (!dom->level_indexing_mode)
+		*freq = dom->opp[idx].perf * dom->mult_factor;
+	else
+		*freq = dom->opp[idx].indicative_freq * dom->mult_factor;
+
+	return 0;
+}
+
 static const struct scmi_perf_proto_ops perf_proto_ops = {
 	.num_domains_get = scmi_perf_num_domains_get,
 	.info_get = scmi_perf_info_get,
@@ -979,6 +999,7 @@  static const struct scmi_perf_proto_ops perf_proto_ops = {
 	.fast_switch_possible = scmi_fast_switch_possible,
 	.power_scale_get = scmi_power_scale_get,
 	.perf_notify_support = scmi_notify_support,
+	.perf_opp_xlate = scmi_perf_opp_xlate,
 };
 
 static int scmi_perf_set_notify_enabled(const struct scmi_protocol_handle *ph,
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index b0947d004826..9c285ae89848 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -145,6 +145,7 @@  struct scmi_perf_notify_info {
  * @power_scale_mw_get: indicates if the power values provided are in milliWatts
  *	or in some other (abstract) scale
  * @perf_notify_support: indicates if limit and level change notification is supported
+ * @perf_opp_xlate: translates the given perf index to frequency in Hz
  */
 struct scmi_perf_proto_ops {
 	int (*num_domains_get)(const struct scmi_protocol_handle *ph);
@@ -173,6 +174,8 @@  struct scmi_perf_proto_ops {
 	enum scmi_power_scale (*power_scale_get)(const struct scmi_protocol_handle *ph);
 	int (*perf_notify_support)(const struct scmi_protocol_handle *ph, u32 domain,
 				   struct scmi_perf_notify_info *info);
+	int (*perf_opp_xlate)(const struct scmi_protocol_handle *ph, u32 domain,
+			      int idx, unsigned long *freq);
 };
 
 /**