diff mbox series

[v2,1/3] dt-bindings: thermal: Restore the thermal-sensors property

Message ID 20240119110842.772606-2-abailon@baylibre.com (mailing list archive)
State New
Headers show
Series thermal: Add support of multiple sensors | expand

Commit Message

Alexandre Bailon Jan. 19, 2024, 11:08 a.m. UTC
thermal-sensors was defined in thermal.txt but when the yaml binding
has been defined, its definition has changed, dropping support of multi
sensors.
Since we are adding support of multi sensors, use the original definition
for thermal-sensors property.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Rob Herring Jan. 30, 2024, 6:06 p.m. UTC | #1
On Fri, 19 Jan 2024 12:08:40 +0100, Alexandre Bailon wrote:
> thermal-sensors was defined in thermal.txt but when the yaml binding
> has been defined, its definition has changed, dropping support of multi
> sensors.
> Since we are adding support of multi sensors, use the original definition
> for thermal-sensors property.
> 
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
>  Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 4a8dabc48170..b2988758d6ff 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -77,10 +77,9 @@  patternProperties:
 
       thermal-sensors:
         $ref: /schemas/types.yaml#/definitions/phandle-array
-        maxItems: 1
         description:
-          The thermal sensor phandle and sensor specifier used to monitor this
-          thermal zone.
+          A list of thermal sensor phandles and sensor specifier
+          used while monitoring the thermal zone.
 
       coefficients:
         $ref: /schemas/types.yaml#/definitions/uint32-array