diff mbox series

[v5,3/5] clk: qcom: common: Add interconnect clocks support

Message ID 20240328075936.223461-4-quic_varada@quicinc.com (mailing list archive)
State Handled Elsewhere, archived
Headers show
Series Add interconnect driver for IPQ9574 SoC | expand

Commit Message

Varadarajan Narayanan March 28, 2024, 7:59 a.m. UTC
Unlike MSM platforms that manage NoC related clocks and scaling
from RPM, IPQ SoCs dont involve RPM in managing NoC related
clocks and there is no NoC scaling.

However, there is a requirement to enable some NoC interface
clocks for accessing the peripheral controllers present on
these NoCs. Though exposing these as normal clocks would work,
having a minimalistic interconnect driver to handle these clocks
would make it consistent with other Qualcomm platforms resulting
in common code paths. This is similar to msm8996-cbf's usage of
icc-clk framework.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v5: Split changes in common.c to separate patch
    Fix error handling
    Use devm_icc_clk_register instead of icc_clk_register
v4: Use clk_hw instead of indices
    Do icc register in qcom_cc_probe() call stream
    Add icc clock info to qcom_cc_desc structure
v3: Use indexed identifiers here to avoid confusion
    Fix error messages and move to common.c
v2: Move DTS to separate patch
    Update commit log
    Auto select CONFIG_INTERCONNECT & CONFIG_INTERCONNECT_CLK to fix build error
---
 drivers/clk/qcom/common.c | 39 ++++++++++++++++++++++++++++++++++++++-
 drivers/clk/qcom/common.h |  3 +++
 2 files changed, 41 insertions(+), 1 deletion(-)

Comments

Stephen Boyd March 28, 2024, 9:54 p.m. UTC | #1
Quoting Varadarajan Narayanan (2024-03-28 00:59:34)
> diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> index 75f09e6e057e..9fa271812373 100644
> --- a/drivers/clk/qcom/common.c
> +++ b/drivers/clk/qcom/common.c
> @@ -8,6 +8,8 @@
>  #include <linux/regmap.h>
>  #include <linux/platform_device.h>
>  #include <linux/clk-provider.h>
> +#include <linux/interconnect-clk.h>
> +#include <linux/interconnect-provider.h>

Do we need the second include?

>  #include <linux/reset-controller.h>
>  #include <linux/of.h>
>  
> @@ -234,6 +236,41 @@ static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
>         return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
>  }
>  
> +#if IS_ENABLED(CONFIG_INTERCONNECT_CLK)
> +static int qcom_cc_icc_register(struct device *dev,
> +                               const struct qcom_cc_desc *desc)
> +{
> +       struct icc_clk_data *icd;
> +       int i;
> +
> +       if (!desc->icc_hws)
> +               return 0;
> +
> +       icd = devm_kcalloc(dev, desc->num_icc_hws, sizeof(*icd), GFP_KERNEL);
> +       if (!icd)
> +               return -ENOMEM;
> +
> +       for (i = 0; i < desc->num_icc_hws; i++) {
> +               icd[i].clk = devm_clk_hw_get_clk(dev, desc->icc_hws[i], "qcom");

Make the con_id "icc" instead please, so we know the consumer is
icc_clk. Even better would be for the icc_clk device itself to be the
one requesting with devm_clk_hw_get_clk() so that we associate the clk
handle with the consumer device. It would also help us make it so that
drivers defer probe until their clk isn't an orphan.

> +               if (IS_ERR(icd[i].clk))
> +                       return dev_err_probe(dev, PTR_ERR(icd[i].clk),
> +                                            "get clock failed (%ld)\n",
> +                                            PTR_ERR(icd[i].clk));
> +
> +               icd[i].name = clk_hw_get_name(desc->icc_hws[i]);
> +       }
> +
> +       return PTR_ERR_OR_ZERO(devm_icc_clk_register(dev, desc->first_id,
> +                                                    desc->num_icc_hws, icd));
> +}
> +#else
> +static int qcom_cc_icc_register(struct device *dev,
> +                               const struct qcom_cc_desc *desc)
> +{
> +       return 0;
> +}

Instead of this please have an

	if (!IS_ENABLED(CONFIG_INTERCONNECT_CLK))
		return 0;

> +#endif
> +
>  int qcom_cc_really_probe(struct platform_device *pdev,
>                          const struct qcom_cc_desc *desc, struct regmap *regmap)
>  {
> @@ -303,7 +340,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
>         if (ret)
>                 return ret;
>  
> -       return 0;
> +       return qcom_cc_icc_register(dev, desc);
>  }
>  EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
>  
> diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
> index 9c8f7b798d9f..d8ac26d83f3c 100644
> --- a/drivers/clk/qcom/common.h
> +++ b/drivers/clk/qcom/common.h
> @@ -29,6 +29,9 @@ struct qcom_cc_desc {
>         size_t num_gdscs;
>         struct clk_hw **clk_hws;
>         size_t num_clk_hws;
> +       struct clk_hw **icc_hws;
> +       size_t num_icc_hws;
> +       unsigned int first_id;

'first_id' is gross.
Varadarajan Narayanan March 29, 2024, 10:48 a.m. UTC | #2
On Thu, Mar 28, 2024 at 02:54:52PM -0700, Stephen Boyd wrote:
> Quoting Varadarajan Narayanan (2024-03-28 00:59:34)
> > diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> > index 75f09e6e057e..9fa271812373 100644
> > --- a/drivers/clk/qcom/common.c
> > +++ b/drivers/clk/qcom/common.c
> > @@ -8,6 +8,8 @@
> >  #include <linux/regmap.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/clk-provider.h>
> > +#include <linux/interconnect-clk.h>
> > +#include <linux/interconnect-provider.h>
>
> Do we need the second include?

Will remove.

> >  #include <linux/reset-controller.h>
> >  #include <linux/of.h>
> >
> > @@ -234,6 +236,41 @@ static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
> >         return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
> >  }
> >
> > +#if IS_ENABLED(CONFIG_INTERCONNECT_CLK)
> > +static int qcom_cc_icc_register(struct device *dev,
> > +                               const struct qcom_cc_desc *desc)
> > +{
> > +       struct icc_clk_data *icd;
> > +       int i;
> > +
> > +       if (!desc->icc_hws)
> > +               return 0;
> > +
> > +       icd = devm_kcalloc(dev, desc->num_icc_hws, sizeof(*icd), GFP_KERNEL);
> > +       if (!icd)
> > +               return -ENOMEM;
> > +
> > +       for (i = 0; i < desc->num_icc_hws; i++) {
> > +               icd[i].clk = devm_clk_hw_get_clk(dev, desc->icc_hws[i], "qcom");
>
> Make the con_id "icc" instead please, so we know the consumer is
> icc_clk.

Ok.

> Even better would be for the icc_clk device itself to be the
> one requesting with devm_clk_hw_get_clk() so that we associate the clk
> handle with the consumer device. It would also help us make it so that
> drivers defer probe until their clk isn't an orphan.

Not sure if I understand the comments correctly.

In one of the previous patches, had
	icd[i].clk = clks[noc_clks[i]]->hw.clk;

This was said to be error prone since the clock would not be
ref counted. Hence used devm_clk_hw_get_clk before doing
icc_clk_register.

Now, are you suggesting to use the direct clock pointer
and do a devm_clk_hw_get_clk from the consumer driver?
This will take care of the refcounting. However, we will
have to add these clock entries to the consumer DT node.
Is this ok?

> > +               if (IS_ERR(icd[i].clk))
> > +                       return dev_err_probe(dev, PTR_ERR(icd[i].clk),
> > +                                            "get clock failed (%ld)\n",
> > +                                            PTR_ERR(icd[i].clk));
> > +
> > +               icd[i].name = clk_hw_get_name(desc->icc_hws[i]);
> > +       }
> > +
> > +       return PTR_ERR_OR_ZERO(devm_icc_clk_register(dev, desc->first_id,
> > +                                                    desc->num_icc_hws, icd));
> > +}
> > +#else
> > +static int qcom_cc_icc_register(struct device *dev,
> > +                               const struct qcom_cc_desc *desc)
> > +{
> > +       return 0;
> > +}
>
> Instead of this please have an
>
> 	if (!IS_ENABLED(CONFIG_INTERCONNECT_CLK))
> 		return 0;

Ok.

> > +#endif
> > +
> >  int qcom_cc_really_probe(struct platform_device *pdev,
> >                          const struct qcom_cc_desc *desc, struct regmap *regmap)
> >  {
> > @@ -303,7 +340,7 @@ int qcom_cc_really_probe(struct platform_device *pdev,
> >         if (ret)
> >                 return ret;
> >
> > -       return 0;
> > +       return qcom_cc_icc_register(dev, desc);
> >  }
> >  EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
> >
> > diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
> > index 9c8f7b798d9f..d8ac26d83f3c 100644
> > --- a/drivers/clk/qcom/common.h
> > +++ b/drivers/clk/qcom/common.h
> > @@ -29,6 +29,9 @@ struct qcom_cc_desc {
> >         size_t num_gdscs;
> >         struct clk_hw **clk_hws;
> >         size_t num_clk_hws;
> > +       struct clk_hw **icc_hws;
> > +       size_t num_icc_hws;
> > +       unsigned int first_id;
>
> 'first_id' is gross.

will change it to 'icc_id'.

Thanks
Varada
Stephen Boyd April 5, 2024, 9:25 p.m. UTC | #3
Quoting Varadarajan Narayanan (2024-03-29 03:48:24)
> On Thu, Mar 28, 2024 at 02:54:52PM -0700, Stephen Boyd wrote:
> > Quoting Varadarajan Narayanan (2024-03-28 00:59:34)
> > > diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> > > index 75f09e6e057e..9fa271812373 100644
> > > --- a/drivers/clk/qcom/common.c
> > > +++ b/drivers/clk/qcom/common.c
> > > @@ -234,6 +236,41 @@ static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
> > >         return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
> > >  }
> > >
> > > +#if IS_ENABLED(CONFIG_INTERCONNECT_CLK)
> > > +static int qcom_cc_icc_register(struct device *dev,
> > > +                               const struct qcom_cc_desc *desc)
> > > +{
> > > +       struct icc_clk_data *icd;
> > > +       int i;
> > > +
> > > +       if (!desc->icc_hws)
> > > +               return 0;
> > > +
> > > +       icd = devm_kcalloc(dev, desc->num_icc_hws, sizeof(*icd), GFP_KERNEL);
> > > +       if (!icd)
> > > +               return -ENOMEM;
> > > +
> > > +       for (i = 0; i < desc->num_icc_hws; i++) {
> > > +               icd[i].clk = devm_clk_hw_get_clk(dev, desc->icc_hws[i], "qcom");
> >
> > Make the con_id "icc" instead please, so we know the consumer is
> > icc_clk.
> 
> Ok.
> 
> > Even better would be for the icc_clk device itself to be the
> > one requesting with devm_clk_hw_get_clk() so that we associate the clk
> > handle with the consumer device. It would also help us make it so that
> > drivers defer probe until their clk isn't an orphan.
> 
> Not sure if I understand the comments correctly.
> 
> In one of the previous patches, had
>         icd[i].clk = clks[noc_clks[i]]->hw.clk;
> 
> This was said to be error prone since the clock would not be
> ref counted. Hence used devm_clk_hw_get_clk before doing
> icc_clk_register.
> 
> Now, are you suggesting to use the direct clock pointer
> and do a devm_clk_hw_get_clk from the consumer driver?
> This will take care of the refcounting. However, we will
> have to add these clock entries to the consumer DT node.
> Is this ok?

Why do they need to be added to the consumer DT node? Why can't the
icc_clk device driver (icc_clk_driver?) use struct clk_hw instead of
struct clk in struct icc_clk_data? The answer cannot be that the icc_clk
driver cannot be changed.

> > > diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
> > > index 9c8f7b798d9f..d8ac26d83f3c 100644
> > > --- a/drivers/clk/qcom/common.h
> > > +++ b/drivers/clk/qcom/common.h
> > > @@ -29,6 +29,9 @@ struct qcom_cc_desc {
> > >         size_t num_gdscs;
> > >         struct clk_hw **clk_hws;
> > >         size_t num_clk_hws;
> > > +       struct clk_hw **icc_hws;
> > > +       size_t num_icc_hws;
> > > +       unsigned int first_id;
> >
> > 'first_id' is gross.
> 
> will change it to 'icc_id'.

That's not what I meant :) The whole concept of having to pick some
random number is bad. At the least, hide that in the icc_clk driver so
that we don't have to put this in every clk provider that is also an
interconnect provider.
diff mbox series

Patch

diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 75f09e6e057e..9fa271812373 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -8,6 +8,8 @@ 
 #include <linux/regmap.h>
 #include <linux/platform_device.h>
 #include <linux/clk-provider.h>
+#include <linux/interconnect-clk.h>
+#include <linux/interconnect-provider.h>
 #include <linux/reset-controller.h>
 #include <linux/of.h>
 
@@ -234,6 +236,41 @@  static struct clk_hw *qcom_cc_clk_hw_get(struct of_phandle_args *clkspec,
 	return cc->rclks[idx] ? &cc->rclks[idx]->hw : NULL;
 }
 
+#if IS_ENABLED(CONFIG_INTERCONNECT_CLK)
+static int qcom_cc_icc_register(struct device *dev,
+				const struct qcom_cc_desc *desc)
+{
+	struct icc_clk_data *icd;
+	int i;
+
+	if (!desc->icc_hws)
+		return 0;
+
+	icd = devm_kcalloc(dev, desc->num_icc_hws, sizeof(*icd), GFP_KERNEL);
+	if (!icd)
+		return -ENOMEM;
+
+	for (i = 0; i < desc->num_icc_hws; i++) {
+		icd[i].clk = devm_clk_hw_get_clk(dev, desc->icc_hws[i], "qcom");
+		if (IS_ERR(icd[i].clk))
+			return dev_err_probe(dev, PTR_ERR(icd[i].clk),
+					     "get clock failed (%ld)\n",
+					     PTR_ERR(icd[i].clk));
+
+		icd[i].name = clk_hw_get_name(desc->icc_hws[i]);
+	}
+
+	return PTR_ERR_OR_ZERO(devm_icc_clk_register(dev, desc->first_id,
+						     desc->num_icc_hws, icd));
+}
+#else
+static int qcom_cc_icc_register(struct device *dev,
+				const struct qcom_cc_desc *desc)
+{
+	return 0;
+}
+#endif
+
 int qcom_cc_really_probe(struct platform_device *pdev,
 			 const struct qcom_cc_desc *desc, struct regmap *regmap)
 {
@@ -303,7 +340,7 @@  int qcom_cc_really_probe(struct platform_device *pdev,
 	if (ret)
 		return ret;
 
-	return 0;
+	return qcom_cc_icc_register(dev, desc);
 }
 EXPORT_SYMBOL_GPL(qcom_cc_really_probe);
 
diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
index 9c8f7b798d9f..d8ac26d83f3c 100644
--- a/drivers/clk/qcom/common.h
+++ b/drivers/clk/qcom/common.h
@@ -29,6 +29,9 @@  struct qcom_cc_desc {
 	size_t num_gdscs;
 	struct clk_hw **clk_hws;
 	size_t num_clk_hws;
+	struct clk_hw **icc_hws;
+	size_t num_icc_hws;
+	unsigned int first_id;
 };
 
 /**