| Message ID | 20240414-arm-psci-system_reset2-vendor-reboots-v2-4-da9a055a648f@quicinc.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Implement vendor resets for PSCI SYSTEM_RESET2 | expand |
On Sun, 14 Apr 2024 at 22:32, Elliot Berman <quic_eberman@quicinc.com> wrote: > > Add nodes for the vendor-defined system resets. "bootloader" will cause > device to reboot and stop in the bootloader's fastboot mode. "edl" will > cause device to reboot into "emergency download mode", which permits > loading images via the Firehose protocol. > > Co-developed-by: Shivendra Pratap <quic_spratap@quicinc.com> > Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com> > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > --- > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > index e4bfad50a669..a966f6c8dd7c 100644 > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -126,6 +126,11 @@ debug_vm_mem: debug-vm@d0600000 { > }; > }; > > + psci { Please use a label instead. Otherwise it looks as if you are adding new device node. > + mode-bootloader = <0x10001 0x2>; > + mode-edl = <0 0x1>; > + }; > + > vph_pwr: vph-pwr-regulator { > compatible = "regulator-fixed"; > regulator-name = "vph_pwr"; > > -- > 2.34.1 > >
On Mon, Apr 15, 2024 at 02:13:29AM +0300, Dmitry Baryshkov wrote: > On Sun, 14 Apr 2024 at 22:32, Elliot Berman <quic_eberman@quicinc.com> wrote: > > > > Add nodes for the vendor-defined system resets. "bootloader" will cause > > device to reboot and stop in the bootloader's fastboot mode. "edl" will > > cause device to reboot into "emergency download mode", which permits > > loading images via the Firehose protocol. > > > > Co-developed-by: Shivendra Pratap <quic_spratap@quicinc.com> > > Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com> > > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > > --- > > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 5 +++++ > > 1 file changed, 5 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > index e4bfad50a669..a966f6c8dd7c 100644 > > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > @@ -126,6 +126,11 @@ debug_vm_mem: debug-vm@d0600000 { > > }; > > }; > > > > + psci { > > Please use a label instead. Otherwise it looks as if you are adding > new device node. > Right. Fixed for the next revision. Thanks, Elliot > > + mode-bootloader = <0x10001 0x2>; > > + mode-edl = <0 0x1>; > > + }; > > + > > vph_pwr: vph-pwr-regulator { > > compatible = "regulator-fixed"; > > regulator-name = "vph_pwr"; > > > > -- > > 2.34.1 > > > > > > > -- > With best wishes > Dmitry
On 4/15/24 02:32, Elliot Berman wrote: > On Mon, Apr 15, 2024 at 02:13:29AM +0300, Dmitry Baryshkov wrote: >> On Sun, 14 Apr 2024 at 22:32, Elliot Berman <quic_eberman@quicinc.com> wrote: >>> >>> Add nodes for the vendor-defined system resets. "bootloader" will cause >>> device to reboot and stop in the bootloader's fastboot mode. "edl" will >>> cause device to reboot into "emergency download mode", which permits >>> loading images via the Firehose protocol. >>> >>> Co-developed-by: Shivendra Pratap <quic_spratap@quicinc.com> >>> Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com> >>> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> >>> --- >>> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 5 +++++ >>> 1 file changed, 5 insertions(+) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts >>> index e4bfad50a669..a966f6c8dd7c 100644 >>> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts >>> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts >>> @@ -126,6 +126,11 @@ debug_vm_mem: debug-vm@d0600000 { >>> }; >>> }; >>> >>> + psci { >> >> Please use a label instead. Otherwise it looks as if you are adding >> new device node. >> > > Right. Fixed for the next revision. Are you guys planning to make this sorta ABI-like? If so (which would be greatly appreciated by the way..), perhaps you could stick these magic values in dt-bindings and give them cool names FWIW DEN0022 (my second-favorite book) suggests these values are almost totally vendor-defined, so if I were Qualcomm, I'd take the creative liberty to come up with a set of numbers and never ever ever change them Konrad
On Mon, Apr 15, 2024 at 09:42:40PM +0200, Konrad Dybcio wrote: > > > On 4/15/24 02:32, Elliot Berman wrote: > > On Mon, Apr 15, 2024 at 02:13:29AM +0300, Dmitry Baryshkov wrote: > > > On Sun, 14 Apr 2024 at 22:32, Elliot Berman <quic_eberman@quicinc.com> wrote: > > > > > > > > Add nodes for the vendor-defined system resets. "bootloader" will cause > > > > device to reboot and stop in the bootloader's fastboot mode. "edl" will > > > > cause device to reboot into "emergency download mode", which permits > > > > loading images via the Firehose protocol. > > > > > > > > Co-developed-by: Shivendra Pratap <quic_spratap@quicinc.com> > > > > Signed-off-by: Shivendra Pratap <quic_spratap@quicinc.com> > > > > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > > > > --- > > > > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 5 +++++ > > > > 1 file changed, 5 insertions(+) > > > > > > > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > > > index e4bfad50a669..a966f6c8dd7c 100644 > > > > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > > > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > > > @@ -126,6 +126,11 @@ debug_vm_mem: debug-vm@d0600000 { > > > > }; > > > > }; > > > > > > > > + psci { > > > > > > Please use a label instead. Otherwise it looks as if you are adding > > > new device node. > > > > > > > Right. Fixed for the next revision. > > Are you guys planning to make this sorta ABI-like? > > If so (which would be greatly appreciated by the way..), perhaps you > could stick these magic values in dt-bindings and give them cool names > > FWIW DEN0022 (my second-favorite book) suggests these values are almost > totally vendor-defined, so if I were Qualcomm, I'd take the creative > liberty to come up with a set of numbers and never ever ever change > them This is my goal as well. I'd like to keep the magic values out of dt-bindings until we get the vendor SYSTEM_RESET2 spread across more devices, as things might need a bit of settling. Since having stable vendor reset2 is (IMO) primarily a benefit to Qualcomm, I expect this will happen naturally.
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index e4bfad50a669..a966f6c8dd7c 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -126,6 +126,11 @@ debug_vm_mem: debug-vm@d0600000 { }; }; + psci { + mode-bootloader = <0x10001 0x2>; + mode-edl = <0 0x1>; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr";