| Message ID | 20240617220535.359021-8-macroalpha82@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | Add Battery and USB Supply for AXP717 | expand |
On Tue, 18 Jun 2024, at 10:05 AM, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> Thanks Chris! > Add support for the AXP717 PMIC battery charger. The AXP717 differs > greatly from existing AXP battery chargers in that it cannot measure > the discharge current. The battery does seem to report a discharge current with no USB power connected, do you think this is not accurate? localhost:/sys/class/power_supply/axp20x-battery# cat current_now 433000 Otherwise Working charge state, percentage and current/voltage. Thanks! Tested-by: Ryan Walklin <ryan@testtoast.com> Regards, Ryan
On Mon, Jun 17, 2024 at 05:05:34PM -0500, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the AXP717 PMIC battery charger. The AXP717 differs > greatly from existing AXP battery chargers in that it cannot measure > the discharge current. The datasheet does not document the current > value's offset or scale, so the POWER_SUPPLY_PROP_CURRENT_NOW is left > unscaled. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > --- > drivers/power/supply/axp20x_battery.c | 580 +++++++++++++++++++++++--- > 1 file changed, 531 insertions(+), 49 deletions(-) > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > index 6ac5c80cfda2..f09a56948642 100644 > --- a/drivers/power/supply/axp20x_battery.c > +++ b/drivers/power/supply/axp20x_battery.c > @@ -32,9 +32,19 @@ > #include <linux/mfd/axp20x.h> > > #define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) > +#define AXP717_PWR_STATUS_MASK GENMASK(6, 5) > +#define AXP717_PWR_STATUS_BAT_STANDBY (0 << 5) > +#define AXP717_PWR_STATUS_BAT_CHRG (1 << 5) > +#define AXP717_PWR_STATUS_BAT_DISCHRG (2 << 5) > > #define AXP20X_PWR_OP_BATT_PRESENT BIT(5) > #define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) > +#define AXP717_PWR_OP_BATT_PRESENT BIT(3) > + > +#define AXP717_BATT_PMU_FAULT_MASK GENMASK(2, 0) > +#define AXP717_BATT_UVLO_2_5V (1 << 2) > +#define AXP717_BATT_OVER_TEMP (1 << 1) > +#define AXP717_BATT_UNDER_TEMP (1 << 0) > > #define AXP209_FG_PERCENT GENMASK(6, 0) > #define AXP22X_FG_VALID BIT(7) > @@ -49,20 +59,50 @@ > #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) > #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) > > +#define AXP717_CHRG_ENABLE BIT(1) > +#define AXP717_CHRG_CV_VOLT_MASK GENMASK(2, 0) > +#define AXP717_CHRG_CV_4_0V 0 > +#define AXP717_CHRG_CV_4_1V 1 > +#define AXP717_CHRG_CV_4_2V 2 > +#define AXP717_CHRG_CV_4_35V 3 > +#define AXP717_CHRG_CV_4_4V 4 > +/* Values 5 and 6 reserved. */ > +#define AXP717_CHRG_CV_5_0V 7 > + > #define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) > > #define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) > +#define AXP717_ICC_CHARGER_LIM GENMASK(5, 0) AXP717_ICC_CHARGER_LIM_MASK > + > +#define AXP717_ITERM_CHG_LIM GENMASK(3, 0) AXP717_ITERM_CHG_LIM_MASK > +#define AXP717_ITERM_CC_STEP 64000 > > #define AXP20X_V_OFF_MASK GENMASK(2, 0) > +#define AXP717_V_OFF_MASK GENMASK(6, 4) > + > +#define AXP717_BAT_VMIN_MIN_UV 2600000 > +#define AXP717_BAT_VMIN_MAX_UV 3300000 > +#define AXP717_BAT_VMIN_STEP 100000 > +#define AXP717_BAT_CV_MIN_UV 4000000 > +#define AXP717_BAT_CV_MAX_UV 5000000 > +#define AXP717_BAT_CC_MIN_UA 0 > +#define AXP717_BAT_CC_MAX_UA 3008000 > > struct axp20x_batt_ps; > > struct axp_data { > - int ccc_scale; > - int ccc_offset; > - bool has_fg_valid; > + int ccc_scale; > + int ccc_offset; > + bool has_fg_valid; > + const struct power_supply_desc *bat_ps_desc; > int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); > int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); > + int (*cfg_iio_chan)(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt); > + void (*set_bat_info)(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt, > + struct power_supply_battery_info *info); > + int (*get_constant_chg_cur)(struct axp20x_batt_ps *axp, int *val); Instead of adding a callback that is half different, probably just add fields for the CCC register offset and mask values to generalize the existing function. Please split out changes that generalize the driver from the axp717 specific changes. > }; > > struct axp20x_batt_ps { > @@ -135,6 +175,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > return 0; > } > > +static int axp717_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int *val) > +{ > + int ret, reg; > + > + ret = regmap_read(axp20x_batt->regmap, AXP717_CV_CHG_SET, ®); > + if (ret) > + return ret; > + > + switch (reg & AXP717_CHRG_CV_VOLT_MASK) { > + case AXP717_CHRG_CV_4_0V: > + *val = 4000000; > + break; > + case AXP717_CHRG_CV_4_1V: > + *val = 4100000; > + break; > + case AXP717_CHRG_CV_4_2V: > + *val = 4200000; > + break; > + case AXP717_CHRG_CV_4_35V: > + *val = 4350000; > + break; > + case AXP717_CHRG_CV_4_4V: > + *val = 4400000; > + break; > + case AXP717_CHRG_CV_5_0V: > + *val = 5000000; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > int *val) > { > @@ -180,6 +255,22 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > return 0; > } > > +static int axp717_get_constant_charge_current(struct axp20x_batt_ps *axp, > + int *val) > +{ > + int ret; > + > + ret = regmap_read(axp->regmap, AXP717_ICC_CHG_SET, val); > + if (ret) > + return ret; > + > + *val &= AXP717_ICC_CHARGER_LIM; > + > + *val = *val * axp->data->ccc_scale; > + > + return 0; > +} > + > static int axp20x_battery_get_prop(struct power_supply *psy, > enum power_supply_property psp, > union power_supply_propval *val) > @@ -332,6 +423,178 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > return 0; > } > > +static int axp717_battery_get_prop(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > + int ret = 0, reg; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_PRESENT: > + case POWER_SUPPLY_PROP_ONLINE: > + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, > + ®); > + if (ret) > + return ret; > + > + val->intval = !!(reg & AXP717_PWR_OP_BATT_PRESENT); > + break; The battery could be present but not online if some fault were to happen. Please differentiate the two. > + > + case POWER_SUPPLY_PROP_STATUS: > + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_STATUS_2, > + ®); > + if (ret) > + return ret; > + > + switch (reg & AXP717_PWR_STATUS_MASK) { > + case AXP717_PWR_STATUS_BAT_STANDBY: > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > + break; > + > + case AXP717_PWR_STATUS_BAT_CHRG: > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > + break; > + > + case AXP717_PWR_STATUS_BAT_DISCHRG: > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > + break; > + > + default: > + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; > + } > + > + break; > + > + /* > + * If a fault is detected it must also be cleared; if the > + * condition persists it should reappear (This is an > + * assumption, it's actually not documented). A restart was Can you test and confirm your assumption? Thanks ChenYu > + * not sufficient to clear the bit in testing despite the > + * register listed as POR. > + */ > + case POWER_SUPPLY_PROP_HEALTH: > + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_FAULT, > + ®); > + if (ret) > + return ret; > + > + switch (reg & AXP717_BATT_PMU_FAULT_MASK) { > + case AXP717_BATT_UVLO_2_5V: > + val->intval = POWER_SUPPLY_HEALTH_DEAD; > + regmap_update_bits(axp20x_batt->regmap, > + AXP717_PMU_FAULT, > + AXP717_BATT_UVLO_2_5V, > + AXP717_BATT_UVLO_2_5V); > + break; > + > + case AXP717_BATT_OVER_TEMP: > + val->intval = POWER_SUPPLY_HEALTH_HOT; > + regmap_update_bits(axp20x_batt->regmap, > + AXP717_PMU_FAULT, > + AXP717_BATT_OVER_TEMP, > + AXP717_BATT_OVER_TEMP); > + break; > + > + case AXP717_BATT_UNDER_TEMP: > + val->intval = POWER_SUPPLY_HEALTH_COLD; > + regmap_update_bits(axp20x_batt->regmap, > + AXP717_PMU_FAULT, > + AXP717_BATT_UNDER_TEMP, > + AXP717_BATT_UNDER_TEMP); > + break; > + > + default: > + val->intval = POWER_SUPPLY_HEALTH_GOOD; > + } > + > + break; > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > + ret = axp717_get_constant_charge_current(axp20x_batt, > + &val->intval); > + if (ret) > + return ret; > + break; > + > + case POWER_SUPPLY_PROP_CURRENT_NOW: > + /* > + * The offset of this value is currently unknown and is > + * not documented in the datasheet. Based on > + * observation it's assumed to be somewhere around > + * 450ma. I will leave the value raw for now. > + */ > + ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval); > + if (ret) > + return ret; > + /* IIO framework gives mA but Power Supply framework gives uA */ > + val->intval *= 1000; > + break; > + > + case POWER_SUPPLY_PROP_CAPACITY: > + /* When no battery is present, return capacity is 100% */ > + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, > + ®); > + if (ret) > + return ret; > + > + if (!(reg & AXP717_PWR_OP_BATT_PRESENT)) { > + val->intval = 100; > + return 0; Maybe return an error instead? 100 percent on an imaginary battery doesn't make sense. > + } > + > + ret = regmap_read(axp20x_batt->regmap, > + AXP717_BATT_PERCENT_DATA, ®); > + if (ret) > + return ret; > + > + /* > + * Fuel Gauge data takes 7 bits but the stored value seems to be > + * directly the raw percentage without any scaling to 7 bits. > + */ > + val->intval = reg & AXP209_FG_PERCENT; > + break; > + > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > + return axp20x_batt->data->get_max_voltage(axp20x_batt, > + &val->intval); > + > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + ret = regmap_read(axp20x_batt->regmap, > + AXP717_VSYS_V_POWEROFF, ®); > + if (ret) > + return ret; > + > + val->intval = AXP717_BAT_VMIN_MIN_UV + AXP717_BAT_VMIN_STEP * > + (reg & AXP717_V_OFF_MASK); > + break; These should probably be POWER_SUPPLY_PROP_VOLTAGE_{MIN,MAX}. POWER_SUPPLY_PROP_VOLTAGE_{MIN,MAX}_DESIGN should be the values specified in the battery device node with the voltage-{min,max}-design-microvolt properties. The former are configurable limits for the charger, while the latter are physical limits of the battery. Could you also fix the existing values? > + > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + ret = iio_read_channel_processed(axp20x_batt->batt_v, > + &val->intval); > + if (ret) > + return ret; > + > + /* IIO framework gives mV but Power Supply framework gives uV */ > + val->intval *= 1000; > + break; > + > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: > + ret = regmap_read(axp20x_batt->regmap, > + AXP717_ITERM_CHG_SET, ®); > + if (ret) > + return ret; > + > + val->intval = (reg & AXP717_ITERM_CHG_LIM) * AXP717_ITERM_CC_STEP; > + break; > + > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > int val) > { > @@ -388,6 +651,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > AXP20X_CHRG_CTRL1_TGT_VOLT, val); > } > > +static int axp717_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int val) > +{ > + switch (val) { > + case 4000000: > + val = AXP717_CHRG_CV_4_0V; > + break; > + > + case 4100000: > + val = AXP717_CHRG_CV_4_1V; > + break; > + > + case 4200000: > + val = AXP717_CHRG_CV_4_2V; > + break; > + > + default: > + /* > + * AXP717 can go up to 4.35, 4.4, and 5.0 volts which > + * seem too high for lithium batteries, so do not allow. > + */ > + return -EINVAL; > + } > + > + return regmap_update_bits(axp20x_batt->regmap, > + AXP717_CV_CHG_SET, > + AXP717_CHRG_CV_VOLT_MASK, val); > +} > + > static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > int charge_current) > { > @@ -404,6 +696,24 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); > } > > +static int axp717_set_constant_charge_current(struct axp20x_batt_ps *axp, > + int charge_current) > +{ > + int val; > + > + if (charge_current > axp->max_ccc) > + return -EINVAL; > + > + if (charge_current > AXP717_BAT_CC_MAX_UA || charge_current < 0) > + return -EINVAL; > + > + val = (charge_current - axp->data->ccc_offset) / > + axp->data->ccc_scale; > + > + return regmap_update_bits(axp->regmap, AXP717_ICC_CHG_SET, > + AXP717_ICC_CHARGER_LIM, val); > +} > + > static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, > int charge_current) > { > @@ -448,6 +758,19 @@ static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > AXP20X_V_OFF_MASK, val1); > } > > +static int axp717_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > + int min_voltage) > +{ > + int val1 = (min_voltage - AXP717_BAT_VMIN_MIN_UV) / AXP717_BAT_VMIN_STEP; > + > + if (val1 < 0 || val1 > AXP717_V_OFF_MASK) > + return -EINVAL; > + > + return regmap_update_bits(axp_batt->regmap, > + AXP717_VSYS_V_POWEROFF, > + AXP717_V_OFF_MASK, val1); > +} > + > static int axp20x_battery_set_prop(struct power_supply *psy, > enum power_supply_property psp, > const union power_supply_propval *val) > @@ -484,6 +807,42 @@ static int axp20x_battery_set_prop(struct power_supply *psy, > } > } > > +static int axp717_battery_set_prop(struct power_supply *psy, > + enum power_supply_property psp, > + const union power_supply_propval *val) > +{ > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > + > + switch (psp) { > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + return axp717_set_voltage_min_design(axp20x_batt, val->intval); > + > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > + return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval); > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > + return axp717_set_constant_charge_current(axp20x_batt, > + val->intval); > + case POWER_SUPPLY_PROP_STATUS: > + switch (val->intval) { > + case POWER_SUPPLY_STATUS_CHARGING: > + return regmap_update_bits(axp20x_batt->regmap, > + AXP717_MODULE_EN_CONTROL_2, > + AXP717_CHRG_ENABLE, > + AXP717_CHRG_ENABLE); > + > + case POWER_SUPPLY_STATUS_DISCHARGING: > + case POWER_SUPPLY_STATUS_NOT_CHARGING: > + return regmap_update_bits(axp20x_batt->regmap, > + AXP717_MODULE_EN_CONTROL_2, > + AXP717_CHRG_ENABLE, 0); > + } > + fallthrough; > + default: > + return -EINVAL; > + } > +} > + > static enum power_supply_property axp20x_battery_props[] = { > POWER_SUPPLY_PROP_PRESENT, > POWER_SUPPLY_PROP_ONLINE, > @@ -498,6 +857,20 @@ static enum power_supply_property axp20x_battery_props[] = { > POWER_SUPPLY_PROP_CAPACITY, > }; > > +static enum power_supply_property axp717_battery_props[] = { > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_ONLINE, > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_CAPACITY, > + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, > +}; > + > static int axp20x_battery_prop_writeable(struct power_supply *psy, > enum power_supply_property psp) > { > @@ -508,7 +881,16 @@ static int axp20x_battery_prop_writeable(struct power_supply *psy, > psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > } > > -static const struct power_supply_desc axp20x_batt_ps_desc = { > +static int axp717_battery_prop_writeable(struct power_supply *psy, > + enum power_supply_property psp) > +{ > + return psp == POWER_SUPPLY_PROP_STATUS || > + psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || > + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || > + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > +} > + > +static const struct power_supply_desc axp209_batt_ps_desc = { > .name = "axp20x-battery", > .type = POWER_SUPPLY_TYPE_BATTERY, > .properties = axp20x_battery_props, > @@ -518,27 +900,159 @@ static const struct power_supply_desc axp20x_batt_ps_desc = { > .set_property = axp20x_battery_set_prop, > }; > > +static const struct power_supply_desc axp717_batt_ps_desc = { > + .name = "axp20x-battery", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .properties = axp717_battery_props, > + .num_properties = ARRAY_SIZE(axp717_battery_props), > + .property_is_writeable = axp717_battery_prop_writeable, > + .get_property = axp717_battery_get_prop, > + .set_property = axp717_battery_set_prop, > +}; > + > +static int axp209_bat_cfg_iio_channels(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt) > +{ > + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > + if (IS_ERR(axp_batt->batt_v)) { > + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_v); > + } > + > + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_chrg_i"); > + if (IS_ERR(axp_batt->batt_chrg_i)) { > + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_chrg_i); > + } > + > + axp_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_dischrg_i"); > + if (IS_ERR(axp_batt->batt_dischrg_i)) { > + if (PTR_ERR(axp_batt->batt_dischrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_dischrg_i); > + } > + > + return 0; > +} > + > +static int axp717_bat_cfg_iio_channels(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt) > +{ > + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > + if (IS_ERR(axp_batt->batt_v)) { > + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_v); > + } > + > + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_chrg_i"); > + if (IS_ERR(axp_batt->batt_chrg_i)) { > + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_chrg_i); > + } > + > + return 0; > +} > + > +static void axp209_set_battery_info(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt, > + struct power_supply_battery_info *info) > +{ > + int vmin = info->voltage_min_design_uv; > + int ccc = info->constant_charge_current_max_ua; > + > + if (vmin > 0 && axp20x_set_voltage_min_design(axp_batt, vmin)) > + dev_err(&pdev->dev, > + "couldn't set voltage_min_design\n"); > + > + /* Set max to unverified value to be able to set CCC */ > + axp_batt->max_ccc = ccc; > + > + if (ccc <= 0 || axp20x_set_constant_charge_current(axp_batt, ccc)) { > + dev_err(&pdev->dev, > + "couldn't set ccc from DT: fallback to min value\n"); > + ccc = 300000; > + axp_batt->max_ccc = ccc; > + axp20x_set_constant_charge_current(axp_batt, ccc); > + } > +} > + > +static void axp717_set_battery_info(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt, > + struct power_supply_battery_info *info) > +{ > + int vmin = info->voltage_min_design_uv; > + int vmax = info->voltage_max_design_uv; > + int ccc = info->constant_charge_current_max_ua; > + int val; > + > + if (vmin > 0 && axp717_set_voltage_min_design(axp_batt, vmin)) > + dev_err(&pdev->dev, > + "couldn't set voltage_min_design\n"); > + > + if (vmax > 0 && axp717_battery_set_max_voltage(axp_batt, vmax)) > + dev_err(&pdev->dev, > + "couldn't set voltage_max_design\n"); > + > + axp717_get_constant_charge_current(axp_batt, &val); > + axp_batt->max_ccc = ccc; > + if (ccc <= 0 || axp717_set_constant_charge_current(axp_batt, ccc)) { > + dev_err(&pdev->dev, > + "couldn't set ccc from DT: current ccc is %d\n", > + val); > + } > +} > + > static const struct axp_data axp209_data = { > .ccc_scale = 100000, > .ccc_offset = 300000, > + .bat_ps_desc = &axp209_batt_ps_desc, > .get_max_voltage = axp20x_battery_get_max_voltage, > .set_max_voltage = axp20x_battery_set_max_voltage, > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > + .set_bat_info = axp209_set_battery_info, > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > }; > > static const struct axp_data axp221_data = { > .ccc_scale = 150000, > .ccc_offset = 300000, > .has_fg_valid = true, > + .bat_ps_desc = &axp209_batt_ps_desc, > .get_max_voltage = axp22x_battery_get_max_voltage, > .set_max_voltage = axp22x_battery_set_max_voltage, > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > + .set_bat_info = axp209_set_battery_info, > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > +}; > + > +static const struct axp_data axp717_data = { > + .ccc_scale = 64000, > + .ccc_offset = 0, > + .bat_ps_desc = &axp717_batt_ps_desc, > + .get_max_voltage = axp717_battery_get_max_voltage, > + .set_max_voltage = axp717_battery_set_max_voltage, > + .cfg_iio_chan = axp717_bat_cfg_iio_channels, > + .set_bat_info = axp717_set_battery_info, > + .get_constant_chg_cur = axp717_get_constant_charge_current, > }; > > static const struct axp_data axp813_data = { > .ccc_scale = 200000, > .ccc_offset = 200000, > .has_fg_valid = true, > + .bat_ps_desc = &axp209_batt_ps_desc, > .get_max_voltage = axp813_battery_get_max_voltage, > .set_max_voltage = axp20x_battery_set_max_voltage, > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > + .set_bat_info = axp209_set_battery_info, > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > }; > > static const struct of_device_id axp20x_battery_ps_id[] = { > @@ -548,6 +1062,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { > }, { > .compatible = "x-powers,axp221-battery-power-supply", > .data = (void *)&axp221_data, > + }, { > + .compatible = "x-powers,axp717-battery-power-supply", > + .data = (void *)&axp717_data, > }, { > .compatible = "x-powers,axp813-battery-power-supply", > .data = (void *)&axp813_data, > @@ -561,6 +1078,7 @@ static int axp20x_power_probe(struct platform_device *pdev) > struct power_supply_config psy_cfg = {}; > struct power_supply_battery_info *info; > struct device *dev = &pdev->dev; > + int ret; > > if (!of_device_is_available(pdev->dev.of_node)) > return -ENODEV; > @@ -572,29 +1090,6 @@ static int axp20x_power_probe(struct platform_device *pdev) > > axp20x_batt->dev = &pdev->dev; > > - axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > - if (IS_ERR(axp20x_batt->batt_v)) { > - if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) > - return -EPROBE_DEFER; > - return PTR_ERR(axp20x_batt->batt_v); > - } > - > - axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > - "batt_chrg_i"); > - if (IS_ERR(axp20x_batt->batt_chrg_i)) { > - if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) > - return -EPROBE_DEFER; > - return PTR_ERR(axp20x_batt->batt_chrg_i); > - } > - > - axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > - "batt_dischrg_i"); > - if (IS_ERR(axp20x_batt->batt_dischrg_i)) { > - if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) > - return -EPROBE_DEFER; > - return PTR_ERR(axp20x_batt->batt_dischrg_i); > - } > - > axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); > platform_set_drvdata(pdev, axp20x_batt); > > @@ -603,8 +1098,12 @@ static int axp20x_power_probe(struct platform_device *pdev) > > axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev); > > + ret = axp20x_batt->data->cfg_iio_chan(pdev, axp20x_batt); > + if (ret) > + return ret; > + > axp20x_batt->batt = devm_power_supply_register(&pdev->dev, > - &axp20x_batt_ps_desc, > + axp20x_batt->data->bat_ps_desc, > &psy_cfg); > if (IS_ERR(axp20x_batt->batt)) { > dev_err(&pdev->dev, "failed to register power supply: %ld\n", > @@ -613,33 +1112,16 @@ static int axp20x_power_probe(struct platform_device *pdev) > } > > if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { > - int vmin = info->voltage_min_design_uv; > - int ccc = info->constant_charge_current_max_ua; > - > - if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, > - vmin)) > - dev_err(&pdev->dev, > - "couldn't set voltage_min_design\n"); > - > - /* Set max to unverified value to be able to set CCC */ > - axp20x_batt->max_ccc = ccc; > - > - if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, > - ccc)) { > - dev_err(&pdev->dev, > - "couldn't set constant charge current from DT: fallback to minimum value\n"); > - ccc = 300000; > - axp20x_batt->max_ccc = ccc; > - axp20x_set_constant_charge_current(axp20x_batt, ccc); > - } > + axp20x_batt->data->set_bat_info(pdev, axp20x_batt, info); > + power_supply_put_battery_info(axp20x_batt->batt, info); > } > > /* > * Update max CCC to a valid value if battery info is present or set it > * to current register value by default. > */ > - axp20x_get_constant_charge_current(axp20x_batt, > - &axp20x_batt->max_ccc); > + axp20x_batt->data->get_constant_chg_cur(axp20x_batt, > + &axp20x_batt->max_ccc); > > return 0; > } > -- > 2.34.1 >
sysfs correctly reports the presence, voltage and current of the battery. Tested on RG35XX-H (H700) Tested-by: Philippe Simons <simons.philippe@gmail.com> On 18/06/24 00:05, Chris Morgan wrote: > From: Chris Morgan <macromorgan@hotmail.com> > > Add support for the AXP717 PMIC battery charger. The AXP717 differs > greatly from existing AXP battery chargers in that it cannot measure > the discharge current. The datasheet does not document the current > value's offset or scale, so the POWER_SUPPLY_PROP_CURRENT_NOW is left > unscaled. > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > --- > drivers/power/supply/axp20x_battery.c | 580 +++++++++++++++++++++++--- > 1 file changed, 531 insertions(+), 49 deletions(-) > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > index 6ac5c80cfda2..f09a56948642 100644 > --- a/drivers/power/supply/axp20x_battery.c > +++ b/drivers/power/supply/axp20x_battery.c > @@ -32,9 +32,19 @@ > #include <linux/mfd/axp20x.h> > > #define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) > +#define AXP717_PWR_STATUS_MASK GENMASK(6, 5) > +#define AXP717_PWR_STATUS_BAT_STANDBY (0 << 5) > +#define AXP717_PWR_STATUS_BAT_CHRG (1 << 5) > +#define AXP717_PWR_STATUS_BAT_DISCHRG (2 << 5) > > #define AXP20X_PWR_OP_BATT_PRESENT BIT(5) > #define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) > +#define AXP717_PWR_OP_BATT_PRESENT BIT(3) > + > +#define AXP717_BATT_PMU_FAULT_MASK GENMASK(2, 0) > +#define AXP717_BATT_UVLO_2_5V (1 << 2) > +#define AXP717_BATT_OVER_TEMP (1 << 1) > +#define AXP717_BATT_UNDER_TEMP (1 << 0) > > #define AXP209_FG_PERCENT GENMASK(6, 0) > #define AXP22X_FG_VALID BIT(7) > @@ -49,20 +59,50 @@ > #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) > #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) > > +#define AXP717_CHRG_ENABLE BIT(1) > +#define AXP717_CHRG_CV_VOLT_MASK GENMASK(2, 0) > +#define AXP717_CHRG_CV_4_0V 0 > +#define AXP717_CHRG_CV_4_1V 1 > +#define AXP717_CHRG_CV_4_2V 2 > +#define AXP717_CHRG_CV_4_35V 3 > +#define AXP717_CHRG_CV_4_4V 4 > +/* Values 5 and 6 reserved. */ > +#define AXP717_CHRG_CV_5_0V 7 > + > #define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) > > #define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) > +#define AXP717_ICC_CHARGER_LIM GENMASK(5, 0) > + > +#define AXP717_ITERM_CHG_LIM GENMASK(3, 0) > +#define AXP717_ITERM_CC_STEP 64000 > > #define AXP20X_V_OFF_MASK GENMASK(2, 0) > +#define AXP717_V_OFF_MASK GENMASK(6, 4) > + > +#define AXP717_BAT_VMIN_MIN_UV 2600000 > +#define AXP717_BAT_VMIN_MAX_UV 3300000 > +#define AXP717_BAT_VMIN_STEP 100000 > +#define AXP717_BAT_CV_MIN_UV 4000000 > +#define AXP717_BAT_CV_MAX_UV 5000000 > +#define AXP717_BAT_CC_MIN_UA 0 > +#define AXP717_BAT_CC_MAX_UA 3008000 > > struct axp20x_batt_ps; > > struct axp_data { > - int ccc_scale; > - int ccc_offset; > - bool has_fg_valid; > + int ccc_scale; > + int ccc_offset; > + bool has_fg_valid; > + const struct power_supply_desc *bat_ps_desc; > int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); > int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); > + int (*cfg_iio_chan)(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt); > + void (*set_bat_info)(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt, > + struct power_supply_battery_info *info); > + int (*get_constant_chg_cur)(struct axp20x_batt_ps *axp, int *val); > }; > > struct axp20x_batt_ps { > @@ -135,6 +175,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > return 0; > } > > +static int axp717_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int *val) > +{ > + int ret, reg; > + > + ret = regmap_read(axp20x_batt->regmap, AXP717_CV_CHG_SET, ®); > + if (ret) > + return ret; > + > + switch (reg & AXP717_CHRG_CV_VOLT_MASK) { > + case AXP717_CHRG_CV_4_0V: > + *val = 4000000; > + break; > + case AXP717_CHRG_CV_4_1V: > + *val = 4100000; > + break; > + case AXP717_CHRG_CV_4_2V: > + *val = 4200000; > + break; > + case AXP717_CHRG_CV_4_35V: > + *val = 4350000; > + break; > + case AXP717_CHRG_CV_4_4V: > + *val = 4400000; > + break; > + case AXP717_CHRG_CV_5_0V: > + *val = 5000000; > + break; > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > int *val) > { > @@ -180,6 +255,22 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > return 0; > } > > +static int axp717_get_constant_charge_current(struct axp20x_batt_ps *axp, > + int *val) > +{ > + int ret; > + > + ret = regmap_read(axp->regmap, AXP717_ICC_CHG_SET, val); > + if (ret) > + return ret; > + > + *val &= AXP717_ICC_CHARGER_LIM; > + > + *val = *val * axp->data->ccc_scale; > + > + return 0; > +} > + > static int axp20x_battery_get_prop(struct power_supply *psy, > enum power_supply_property psp, > union power_supply_propval *val) > @@ -332,6 +423,178 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > return 0; > } > > +static int axp717_battery_get_prop(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > + int ret = 0, reg; > + > + switch (psp) { > + case POWER_SUPPLY_PROP_PRESENT: > + case POWER_SUPPLY_PROP_ONLINE: > + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, > + ®); > + if (ret) > + return ret; > + > + val->intval = !!(reg & AXP717_PWR_OP_BATT_PRESENT); > + break; > + > + case POWER_SUPPLY_PROP_STATUS: > + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_STATUS_2, > + ®); > + if (ret) > + return ret; > + > + switch (reg & AXP717_PWR_STATUS_MASK) { > + case AXP717_PWR_STATUS_BAT_STANDBY: > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > + break; > + > + case AXP717_PWR_STATUS_BAT_CHRG: > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > + break; > + > + case AXP717_PWR_STATUS_BAT_DISCHRG: > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > + break; > + > + default: > + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; > + } > + > + break; > + > + /* > + * If a fault is detected it must also be cleared; if the > + * condition persists it should reappear (This is an > + * assumption, it's actually not documented). A restart was > + * not sufficient to clear the bit in testing despite the > + * register listed as POR. > + */ > + case POWER_SUPPLY_PROP_HEALTH: > + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_FAULT, > + ®); > + if (ret) > + return ret; > + > + switch (reg & AXP717_BATT_PMU_FAULT_MASK) { > + case AXP717_BATT_UVLO_2_5V: > + val->intval = POWER_SUPPLY_HEALTH_DEAD; > + regmap_update_bits(axp20x_batt->regmap, > + AXP717_PMU_FAULT, > + AXP717_BATT_UVLO_2_5V, > + AXP717_BATT_UVLO_2_5V); > + break; > + > + case AXP717_BATT_OVER_TEMP: > + val->intval = POWER_SUPPLY_HEALTH_HOT; > + regmap_update_bits(axp20x_batt->regmap, > + AXP717_PMU_FAULT, > + AXP717_BATT_OVER_TEMP, > + AXP717_BATT_OVER_TEMP); > + break; > + > + case AXP717_BATT_UNDER_TEMP: > + val->intval = POWER_SUPPLY_HEALTH_COLD; > + regmap_update_bits(axp20x_batt->regmap, > + AXP717_PMU_FAULT, > + AXP717_BATT_UNDER_TEMP, > + AXP717_BATT_UNDER_TEMP); > + break; > + > + default: > + val->intval = POWER_SUPPLY_HEALTH_GOOD; > + } > + > + break; > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > + ret = axp717_get_constant_charge_current(axp20x_batt, > + &val->intval); > + if (ret) > + return ret; > + break; > + > + case POWER_SUPPLY_PROP_CURRENT_NOW: > + /* > + * The offset of this value is currently unknown and is > + * not documented in the datasheet. Based on > + * observation it's assumed to be somewhere around > + * 450ma. I will leave the value raw for now. > + */ > + ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval); > + if (ret) > + return ret; > + /* IIO framework gives mA but Power Supply framework gives uA */ > + val->intval *= 1000; > + break; > + > + case POWER_SUPPLY_PROP_CAPACITY: > + /* When no battery is present, return capacity is 100% */ > + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, > + ®); > + if (ret) > + return ret; > + > + if (!(reg & AXP717_PWR_OP_BATT_PRESENT)) { > + val->intval = 100; > + return 0; > + } > + > + ret = regmap_read(axp20x_batt->regmap, > + AXP717_BATT_PERCENT_DATA, ®); > + if (ret) > + return ret; > + > + /* > + * Fuel Gauge data takes 7 bits but the stored value seems to be > + * directly the raw percentage without any scaling to 7 bits. > + */ > + val->intval = reg & AXP209_FG_PERCENT; > + break; > + > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > + return axp20x_batt->data->get_max_voltage(axp20x_batt, > + &val->intval); > + > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + ret = regmap_read(axp20x_batt->regmap, > + AXP717_VSYS_V_POWEROFF, ®); > + if (ret) > + return ret; > + > + val->intval = AXP717_BAT_VMIN_MIN_UV + AXP717_BAT_VMIN_STEP * > + (reg & AXP717_V_OFF_MASK); > + break; > + > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + ret = iio_read_channel_processed(axp20x_batt->batt_v, > + &val->intval); > + if (ret) > + return ret; > + > + /* IIO framework gives mV but Power Supply framework gives uV */ > + val->intval *= 1000; > + break; > + > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: > + ret = regmap_read(axp20x_batt->regmap, > + AXP717_ITERM_CHG_SET, ®); > + if (ret) > + return ret; > + > + val->intval = (reg & AXP717_ITERM_CHG_LIM) * AXP717_ITERM_CC_STEP; > + break; > + > + default: > + return -EINVAL; > + } > + > + return 0; > +} > + > static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > int val) > { > @@ -388,6 +651,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > AXP20X_CHRG_CTRL1_TGT_VOLT, val); > } > > +static int axp717_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > + int val) > +{ > + switch (val) { > + case 4000000: > + val = AXP717_CHRG_CV_4_0V; > + break; > + > + case 4100000: > + val = AXP717_CHRG_CV_4_1V; > + break; > + > + case 4200000: > + val = AXP717_CHRG_CV_4_2V; > + break; > + > + default: > + /* > + * AXP717 can go up to 4.35, 4.4, and 5.0 volts which > + * seem too high for lithium batteries, so do not allow. > + */ > + return -EINVAL; > + } > + > + return regmap_update_bits(axp20x_batt->regmap, > + AXP717_CV_CHG_SET, > + AXP717_CHRG_CV_VOLT_MASK, val); > +} > + > static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > int charge_current) > { > @@ -404,6 +696,24 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); > } > > +static int axp717_set_constant_charge_current(struct axp20x_batt_ps *axp, > + int charge_current) > +{ > + int val; > + > + if (charge_current > axp->max_ccc) > + return -EINVAL; > + > + if (charge_current > AXP717_BAT_CC_MAX_UA || charge_current < 0) > + return -EINVAL; > + > + val = (charge_current - axp->data->ccc_offset) / > + axp->data->ccc_scale; > + > + return regmap_update_bits(axp->regmap, AXP717_ICC_CHG_SET, > + AXP717_ICC_CHARGER_LIM, val); > +} > + > static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, > int charge_current) > { > @@ -448,6 +758,19 @@ static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > AXP20X_V_OFF_MASK, val1); > } > > +static int axp717_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > + int min_voltage) > +{ > + int val1 = (min_voltage - AXP717_BAT_VMIN_MIN_UV) / AXP717_BAT_VMIN_STEP; > + > + if (val1 < 0 || val1 > AXP717_V_OFF_MASK) > + return -EINVAL; > + > + return regmap_update_bits(axp_batt->regmap, > + AXP717_VSYS_V_POWEROFF, > + AXP717_V_OFF_MASK, val1); > +} > + > static int axp20x_battery_set_prop(struct power_supply *psy, > enum power_supply_property psp, > const union power_supply_propval *val) > @@ -484,6 +807,42 @@ static int axp20x_battery_set_prop(struct power_supply *psy, > } > } > > +static int axp717_battery_set_prop(struct power_supply *psy, > + enum power_supply_property psp, > + const union power_supply_propval *val) > +{ > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > + > + switch (psp) { > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > + return axp717_set_voltage_min_design(axp20x_batt, val->intval); > + > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > + return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval); > + > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > + return axp717_set_constant_charge_current(axp20x_batt, > + val->intval); > + case POWER_SUPPLY_PROP_STATUS: > + switch (val->intval) { > + case POWER_SUPPLY_STATUS_CHARGING: > + return regmap_update_bits(axp20x_batt->regmap, > + AXP717_MODULE_EN_CONTROL_2, > + AXP717_CHRG_ENABLE, > + AXP717_CHRG_ENABLE); > + > + case POWER_SUPPLY_STATUS_DISCHARGING: > + case POWER_SUPPLY_STATUS_NOT_CHARGING: > + return regmap_update_bits(axp20x_batt->regmap, > + AXP717_MODULE_EN_CONTROL_2, > + AXP717_CHRG_ENABLE, 0); > + } > + fallthrough; > + default: > + return -EINVAL; > + } > +} > + > static enum power_supply_property axp20x_battery_props[] = { > POWER_SUPPLY_PROP_PRESENT, > POWER_SUPPLY_PROP_ONLINE, > @@ -498,6 +857,20 @@ static enum power_supply_property axp20x_battery_props[] = { > POWER_SUPPLY_PROP_CAPACITY, > }; > > +static enum power_supply_property axp717_battery_props[] = { > + POWER_SUPPLY_PROP_PRESENT, > + POWER_SUPPLY_PROP_ONLINE, > + POWER_SUPPLY_PROP_STATUS, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_NOW, > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, > + POWER_SUPPLY_PROP_HEALTH, > + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > + POWER_SUPPLY_PROP_CAPACITY, > + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, > +}; > + > static int axp20x_battery_prop_writeable(struct power_supply *psy, > enum power_supply_property psp) > { > @@ -508,7 +881,16 @@ static int axp20x_battery_prop_writeable(struct power_supply *psy, > psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > } > > -static const struct power_supply_desc axp20x_batt_ps_desc = { > +static int axp717_battery_prop_writeable(struct power_supply *psy, > + enum power_supply_property psp) > +{ > + return psp == POWER_SUPPLY_PROP_STATUS || > + psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || > + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || > + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > +} > + > +static const struct power_supply_desc axp209_batt_ps_desc = { > .name = "axp20x-battery", > .type = POWER_SUPPLY_TYPE_BATTERY, > .properties = axp20x_battery_props, > @@ -518,27 +900,159 @@ static const struct power_supply_desc axp20x_batt_ps_desc = { > .set_property = axp20x_battery_set_prop, > }; > > +static const struct power_supply_desc axp717_batt_ps_desc = { > + .name = "axp20x-battery", > + .type = POWER_SUPPLY_TYPE_BATTERY, > + .properties = axp717_battery_props, > + .num_properties = ARRAY_SIZE(axp717_battery_props), > + .property_is_writeable = axp717_battery_prop_writeable, > + .get_property = axp717_battery_get_prop, > + .set_property = axp717_battery_set_prop, > +}; > + > +static int axp209_bat_cfg_iio_channels(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt) > +{ > + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > + if (IS_ERR(axp_batt->batt_v)) { > + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_v); > + } > + > + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_chrg_i"); > + if (IS_ERR(axp_batt->batt_chrg_i)) { > + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_chrg_i); > + } > + > + axp_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_dischrg_i"); > + if (IS_ERR(axp_batt->batt_dischrg_i)) { > + if (PTR_ERR(axp_batt->batt_dischrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_dischrg_i); > + } > + > + return 0; > +} > + > +static int axp717_bat_cfg_iio_channels(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt) > +{ > + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > + if (IS_ERR(axp_batt->batt_v)) { > + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_v); > + } > + > + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > + "batt_chrg_i"); > + if (IS_ERR(axp_batt->batt_chrg_i)) { > + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) > + return -EPROBE_DEFER; > + return PTR_ERR(axp_batt->batt_chrg_i); > + } > + > + return 0; > +} > + > +static void axp209_set_battery_info(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt, > + struct power_supply_battery_info *info) > +{ > + int vmin = info->voltage_min_design_uv; > + int ccc = info->constant_charge_current_max_ua; > + > + if (vmin > 0 && axp20x_set_voltage_min_design(axp_batt, vmin)) > + dev_err(&pdev->dev, > + "couldn't set voltage_min_design\n"); > + > + /* Set max to unverified value to be able to set CCC */ > + axp_batt->max_ccc = ccc; > + > + if (ccc <= 0 || axp20x_set_constant_charge_current(axp_batt, ccc)) { > + dev_err(&pdev->dev, > + "couldn't set ccc from DT: fallback to min value\n"); > + ccc = 300000; > + axp_batt->max_ccc = ccc; > + axp20x_set_constant_charge_current(axp_batt, ccc); > + } > +} > + > +static void axp717_set_battery_info(struct platform_device *pdev, > + struct axp20x_batt_ps *axp_batt, > + struct power_supply_battery_info *info) > +{ > + int vmin = info->voltage_min_design_uv; > + int vmax = info->voltage_max_design_uv; > + int ccc = info->constant_charge_current_max_ua; > + int val; > + > + if (vmin > 0 && axp717_set_voltage_min_design(axp_batt, vmin)) > + dev_err(&pdev->dev, > + "couldn't set voltage_min_design\n"); > + > + if (vmax > 0 && axp717_battery_set_max_voltage(axp_batt, vmax)) > + dev_err(&pdev->dev, > + "couldn't set voltage_max_design\n"); > + > + axp717_get_constant_charge_current(axp_batt, &val); > + axp_batt->max_ccc = ccc; > + if (ccc <= 0 || axp717_set_constant_charge_current(axp_batt, ccc)) { > + dev_err(&pdev->dev, > + "couldn't set ccc from DT: current ccc is %d\n", > + val); > + } > +} > + > static const struct axp_data axp209_data = { > .ccc_scale = 100000, > .ccc_offset = 300000, > + .bat_ps_desc = &axp209_batt_ps_desc, > .get_max_voltage = axp20x_battery_get_max_voltage, > .set_max_voltage = axp20x_battery_set_max_voltage, > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > + .set_bat_info = axp209_set_battery_info, > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > }; > > static const struct axp_data axp221_data = { > .ccc_scale = 150000, > .ccc_offset = 300000, > .has_fg_valid = true, > + .bat_ps_desc = &axp209_batt_ps_desc, > .get_max_voltage = axp22x_battery_get_max_voltage, > .set_max_voltage = axp22x_battery_set_max_voltage, > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > + .set_bat_info = axp209_set_battery_info, > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > +}; > + > +static const struct axp_data axp717_data = { > + .ccc_scale = 64000, > + .ccc_offset = 0, > + .bat_ps_desc = &axp717_batt_ps_desc, > + .get_max_voltage = axp717_battery_get_max_voltage, > + .set_max_voltage = axp717_battery_set_max_voltage, > + .cfg_iio_chan = axp717_bat_cfg_iio_channels, > + .set_bat_info = axp717_set_battery_info, > + .get_constant_chg_cur = axp717_get_constant_charge_current, > }; > > static const struct axp_data axp813_data = { > .ccc_scale = 200000, > .ccc_offset = 200000, > .has_fg_valid = true, > + .bat_ps_desc = &axp209_batt_ps_desc, > .get_max_voltage = axp813_battery_get_max_voltage, > .set_max_voltage = axp20x_battery_set_max_voltage, > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > + .set_bat_info = axp209_set_battery_info, > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > }; > > static const struct of_device_id axp20x_battery_ps_id[] = { > @@ -548,6 +1062,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { > }, { > .compatible = "x-powers,axp221-battery-power-supply", > .data = (void *)&axp221_data, > + }, { > + .compatible = "x-powers,axp717-battery-power-supply", > + .data = (void *)&axp717_data, > }, { > .compatible = "x-powers,axp813-battery-power-supply", > .data = (void *)&axp813_data, > @@ -561,6 +1078,7 @@ static int axp20x_power_probe(struct platform_device *pdev) > struct power_supply_config psy_cfg = {}; > struct power_supply_battery_info *info; > struct device *dev = &pdev->dev; > + int ret; > > if (!of_device_is_available(pdev->dev.of_node)) > return -ENODEV; > @@ -572,29 +1090,6 @@ static int axp20x_power_probe(struct platform_device *pdev) > > axp20x_batt->dev = &pdev->dev; > > - axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > - if (IS_ERR(axp20x_batt->batt_v)) { > - if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) > - return -EPROBE_DEFER; > - return PTR_ERR(axp20x_batt->batt_v); > - } > - > - axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > - "batt_chrg_i"); > - if (IS_ERR(axp20x_batt->batt_chrg_i)) { > - if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) > - return -EPROBE_DEFER; > - return PTR_ERR(axp20x_batt->batt_chrg_i); > - } > - > - axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > - "batt_dischrg_i"); > - if (IS_ERR(axp20x_batt->batt_dischrg_i)) { > - if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) > - return -EPROBE_DEFER; > - return PTR_ERR(axp20x_batt->batt_dischrg_i); > - } > - > axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); > platform_set_drvdata(pdev, axp20x_batt); > > @@ -603,8 +1098,12 @@ static int axp20x_power_probe(struct platform_device *pdev) > > axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev); > > + ret = axp20x_batt->data->cfg_iio_chan(pdev, axp20x_batt); > + if (ret) > + return ret; > + > axp20x_batt->batt = devm_power_supply_register(&pdev->dev, > - &axp20x_batt_ps_desc, > + axp20x_batt->data->bat_ps_desc, > &psy_cfg); > if (IS_ERR(axp20x_batt->batt)) { > dev_err(&pdev->dev, "failed to register power supply: %ld\n", > @@ -613,33 +1112,16 @@ static int axp20x_power_probe(struct platform_device *pdev) > } > > if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { > - int vmin = info->voltage_min_design_uv; > - int ccc = info->constant_charge_current_max_ua; > - > - if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, > - vmin)) > - dev_err(&pdev->dev, > - "couldn't set voltage_min_design\n"); > - > - /* Set max to unverified value to be able to set CCC */ > - axp20x_batt->max_ccc = ccc; > - > - if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, > - ccc)) { > - dev_err(&pdev->dev, > - "couldn't set constant charge current from DT: fallback to minimum value\n"); > - ccc = 300000; > - axp20x_batt->max_ccc = ccc; > - axp20x_set_constant_charge_current(axp20x_batt, ccc); > - } > + axp20x_batt->data->set_bat_info(pdev, axp20x_batt, info); > + power_supply_put_battery_info(axp20x_batt->batt, info); > } > > /* > * Update max CCC to a valid value if battery info is present or set it > * to current register value by default. > */ > - axp20x_get_constant_charge_current(axp20x_batt, > - &axp20x_batt->max_ccc); > + axp20x_batt->data->get_constant_chg_cur(axp20x_batt, > + &axp20x_batt->max_ccc); > > return 0; > }
On Sun, Jun 23, 2024 at 02:19:32PM +0800, Chen-Yu Tsai wrote: > On Mon, Jun 17, 2024 at 05:05:34PM -0500, Chris Morgan wrote: > > From: Chris Morgan <macromorgan@hotmail.com> > > > > Add support for the AXP717 PMIC battery charger. The AXP717 differs > > greatly from existing AXP battery chargers in that it cannot measure > > the discharge current. The datasheet does not document the current > > value's offset or scale, so the POWER_SUPPLY_PROP_CURRENT_NOW is left > > unscaled. > > > > Signed-off-by: Chris Morgan <macromorgan@hotmail.com> > > --- > > drivers/power/supply/axp20x_battery.c | 580 +++++++++++++++++++++++--- > > 1 file changed, 531 insertions(+), 49 deletions(-) > > > > diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c > > index 6ac5c80cfda2..f09a56948642 100644 > > --- a/drivers/power/supply/axp20x_battery.c > > +++ b/drivers/power/supply/axp20x_battery.c > > @@ -32,9 +32,19 @@ > > #include <linux/mfd/axp20x.h> > > > > #define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) > > +#define AXP717_PWR_STATUS_MASK GENMASK(6, 5) > > +#define AXP717_PWR_STATUS_BAT_STANDBY (0 << 5) > > +#define AXP717_PWR_STATUS_BAT_CHRG (1 << 5) > > +#define AXP717_PWR_STATUS_BAT_DISCHRG (2 << 5) > > > > #define AXP20X_PWR_OP_BATT_PRESENT BIT(5) > > #define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) > > +#define AXP717_PWR_OP_BATT_PRESENT BIT(3) > > + > > +#define AXP717_BATT_PMU_FAULT_MASK GENMASK(2, 0) > > +#define AXP717_BATT_UVLO_2_5V (1 << 2) > > +#define AXP717_BATT_OVER_TEMP (1 << 1) > > +#define AXP717_BATT_UNDER_TEMP (1 << 0) > > > > #define AXP209_FG_PERCENT GENMASK(6, 0) > > #define AXP22X_FG_VALID BIT(7) > > @@ -49,20 +59,50 @@ > > #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) > > #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) > > > > +#define AXP717_CHRG_ENABLE BIT(1) > > +#define AXP717_CHRG_CV_VOLT_MASK GENMASK(2, 0) > > +#define AXP717_CHRG_CV_4_0V 0 > > +#define AXP717_CHRG_CV_4_1V 1 > > +#define AXP717_CHRG_CV_4_2V 2 > > +#define AXP717_CHRG_CV_4_35V 3 > > +#define AXP717_CHRG_CV_4_4V 4 > > +/* Values 5 and 6 reserved. */ > > +#define AXP717_CHRG_CV_5_0V 7 > > + > > #define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) > > > > #define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) > > +#define AXP717_ICC_CHARGER_LIM GENMASK(5, 0) > > AXP717_ICC_CHARGER_LIM_MASK Acknowledged. > > > + > > +#define AXP717_ITERM_CHG_LIM GENMASK(3, 0) > > AXP717_ITERM_CHG_LIM_MASK > Acknowledged. > > +#define AXP717_ITERM_CC_STEP 64000 > > > > #define AXP20X_V_OFF_MASK GENMASK(2, 0) > > +#define AXP717_V_OFF_MASK GENMASK(6, 4) > > + > > +#define AXP717_BAT_VMIN_MIN_UV 2600000 > > +#define AXP717_BAT_VMIN_MAX_UV 3300000 > > +#define AXP717_BAT_VMIN_STEP 100000 > > +#define AXP717_BAT_CV_MIN_UV 4000000 > > +#define AXP717_BAT_CV_MAX_UV 5000000 > > +#define AXP717_BAT_CC_MIN_UA 0 > > +#define AXP717_BAT_CC_MAX_UA 3008000 > > > > struct axp20x_batt_ps; > > > > struct axp_data { > > - int ccc_scale; > > - int ccc_offset; > > - bool has_fg_valid; > > + int ccc_scale; > > + int ccc_offset; > > + bool has_fg_valid; > > + const struct power_supply_desc *bat_ps_desc; > > int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); > > int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); > > + int (*cfg_iio_chan)(struct platform_device *pdev, > > + struct axp20x_batt_ps *axp_batt); > > + void (*set_bat_info)(struct platform_device *pdev, > > + struct axp20x_batt_ps *axp_batt, > > + struct power_supply_battery_info *info); > > + int (*get_constant_chg_cur)(struct axp20x_batt_ps *axp, int *val); > > Instead of adding a callback that is half different, probably just add > fields for the CCC register offset and mask values to generalize the > existing function. > > Please split out changes that generalize the driver from the axp717 > specific changes. > Will do. > > }; > > > > struct axp20x_batt_ps { > > @@ -135,6 +175,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > > return 0; > > } > > > > +static int axp717_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > > + int *val) > > +{ > > + int ret, reg; > > + > > + ret = regmap_read(axp20x_batt->regmap, AXP717_CV_CHG_SET, ®); > > + if (ret) > > + return ret; > > + > > + switch (reg & AXP717_CHRG_CV_VOLT_MASK) { > > + case AXP717_CHRG_CV_4_0V: > > + *val = 4000000; > > + break; > > + case AXP717_CHRG_CV_4_1V: > > + *val = 4100000; > > + break; > > + case AXP717_CHRG_CV_4_2V: > > + *val = 4200000; > > + break; > > + case AXP717_CHRG_CV_4_35V: > > + *val = 4350000; > > + break; > > + case AXP717_CHRG_CV_4_4V: > > + *val = 4400000; > > + break; > > + case AXP717_CHRG_CV_5_0V: > > + *val = 5000000; > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, > > int *val) > > { > > @@ -180,6 +255,22 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, > > return 0; > > } > > > > +static int axp717_get_constant_charge_current(struct axp20x_batt_ps *axp, > > + int *val) > > +{ > > + int ret; > > + > > + ret = regmap_read(axp->regmap, AXP717_ICC_CHG_SET, val); > > + if (ret) > > + return ret; > > + > > + *val &= AXP717_ICC_CHARGER_LIM; > > + > > + *val = *val * axp->data->ccc_scale; > > + > > + return 0; > > +} > > + > > static int axp20x_battery_get_prop(struct power_supply *psy, > > enum power_supply_property psp, > > union power_supply_propval *val) > > @@ -332,6 +423,178 @@ static int axp20x_battery_get_prop(struct power_supply *psy, > > return 0; > > } > > > > +static int axp717_battery_get_prop(struct power_supply *psy, > > + enum power_supply_property psp, > > + union power_supply_propval *val) > > +{ > > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > > + int ret = 0, reg; > > + > > + switch (psp) { > > + case POWER_SUPPLY_PROP_PRESENT: > > + case POWER_SUPPLY_PROP_ONLINE: > > + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, > > + ®); > > + if (ret) > > + return ret; > > + > > + val->intval = !!(reg & AXP717_PWR_OP_BATT_PRESENT); > > + break; > > The battery could be present but not online if some fault were to > happen. Please differentiate the two. > I'm afraid I don't know how to differentiate this. I can show the battery as online if it's discharging. Otherwise I can just check for a battery fault and report offline if one is found. > > + > > + case POWER_SUPPLY_PROP_STATUS: > > + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_STATUS_2, > > + ®); > > + if (ret) > > + return ret; > > + > > + switch (reg & AXP717_PWR_STATUS_MASK) { > > + case AXP717_PWR_STATUS_BAT_STANDBY: > > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; > > + break; > > + > > + case AXP717_PWR_STATUS_BAT_CHRG: > > + val->intval = POWER_SUPPLY_STATUS_CHARGING; > > + break; > > + > > + case AXP717_PWR_STATUS_BAT_DISCHRG: > > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; > > + break; > > + > > + default: > > + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; > > + } > > + > > + break; > > + > > + /* > > + * If a fault is detected it must also be cleared; if the > > + * condition persists it should reappear (This is an > > + * assumption, it's actually not documented). A restart was > > Can you test and confirm your assumption? > I'm afraid I cannot as I'm not sure how to trigger another fault (or even what fault I saw previously). I do know that POR registers in the data sheet are not getting reset except when pulling the battery, and I do know that the datasheet says these registers are RW1C. I can update the comment at least to state that information. > > Thanks > ChenYu > > > > + * not sufficient to clear the bit in testing despite the > > + * register listed as POR. > > + */ > > + case POWER_SUPPLY_PROP_HEALTH: > > + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_FAULT, > > + ®); > > + if (ret) > > + return ret; > > + > > + switch (reg & AXP717_BATT_PMU_FAULT_MASK) { > > + case AXP717_BATT_UVLO_2_5V: > > + val->intval = POWER_SUPPLY_HEALTH_DEAD; > > + regmap_update_bits(axp20x_batt->regmap, > > + AXP717_PMU_FAULT, > > + AXP717_BATT_UVLO_2_5V, > > + AXP717_BATT_UVLO_2_5V); > > + break; > > + > > + case AXP717_BATT_OVER_TEMP: > > + val->intval = POWER_SUPPLY_HEALTH_HOT; > > + regmap_update_bits(axp20x_batt->regmap, > > + AXP717_PMU_FAULT, > > + AXP717_BATT_OVER_TEMP, > > + AXP717_BATT_OVER_TEMP); > > + break; > > + > > + case AXP717_BATT_UNDER_TEMP: > > + val->intval = POWER_SUPPLY_HEALTH_COLD; > > + regmap_update_bits(axp20x_batt->regmap, > > + AXP717_PMU_FAULT, > > + AXP717_BATT_UNDER_TEMP, > > + AXP717_BATT_UNDER_TEMP); > > + break; > > + > > + default: > > + val->intval = POWER_SUPPLY_HEALTH_GOOD; > > + } > > + > > + break; > > + > > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > > + ret = axp717_get_constant_charge_current(axp20x_batt, > > + &val->intval); > > + if (ret) > > + return ret; > > + break; > > + > > + case POWER_SUPPLY_PROP_CURRENT_NOW: > > + /* > > + * The offset of this value is currently unknown and is > > + * not documented in the datasheet. Based on > > + * observation it's assumed to be somewhere around > > + * 450ma. I will leave the value raw for now. > > + */ > > + ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval); > > + if (ret) > > + return ret; > > + /* IIO framework gives mA but Power Supply framework gives uA */ > > + val->intval *= 1000; > > + break; > > + > > + case POWER_SUPPLY_PROP_CAPACITY: > > + /* When no battery is present, return capacity is 100% */ > > + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, > > + ®); > > + if (ret) > > + return ret; > > + > > + if (!(reg & AXP717_PWR_OP_BATT_PRESENT)) { > > + val->intval = 100; > > + return 0; > > Maybe return an error instead? 100 percent on an imaginary battery > doesn't make sense. I was just copying the above behavior, but I'll change it for the 717. > > > + } > > + > > + ret = regmap_read(axp20x_batt->regmap, > > + AXP717_BATT_PERCENT_DATA, ®); > > + if (ret) > > + return ret; > > + > > + /* > > + * Fuel Gauge data takes 7 bits but the stored value seems to be > > + * directly the raw percentage without any scaling to 7 bits. > > + */ > > + val->intval = reg & AXP209_FG_PERCENT; > > + break; > > + > > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > > + return axp20x_batt->data->get_max_voltage(axp20x_batt, > > + &val->intval); > > + > > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > > + ret = regmap_read(axp20x_batt->regmap, > > + AXP717_VSYS_V_POWEROFF, ®); > > + if (ret) > > + return ret; > > + > > + val->intval = AXP717_BAT_VMIN_MIN_UV + AXP717_BAT_VMIN_STEP * > > + (reg & AXP717_V_OFF_MASK); > > + break; > > These should probably be POWER_SUPPLY_PROP_VOLTAGE_{MIN,MAX}. > POWER_SUPPLY_PROP_VOLTAGE_{MIN,MAX}_DESIGN should be the values > specified in the battery device node with the > voltage-{min,max}-design-microvolt properties. > > The former are configurable limits for the charger, while the latter > are physical limits of the battery. > > Could you also fix the existing values? Will do, thank you. > > > + > > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > > + ret = iio_read_channel_processed(axp20x_batt->batt_v, > > + &val->intval); > > + if (ret) > > + return ret; > > + > > + /* IIO framework gives mV but Power Supply framework gives uV */ > > + val->intval *= 1000; > > + break; > > + > > + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: > > + ret = regmap_read(axp20x_batt->regmap, > > + AXP717_ITERM_CHG_SET, ®); > > + if (ret) > > + return ret; > > + > > + val->intval = (reg & AXP717_ITERM_CHG_LIM) * AXP717_ITERM_CC_STEP; > > + break; > > + > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > > int val) > > { > > @@ -388,6 +651,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > > AXP20X_CHRG_CTRL1_TGT_VOLT, val); > > } > > > > +static int axp717_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, > > + int val) > > +{ > > + switch (val) { > > + case 4000000: > > + val = AXP717_CHRG_CV_4_0V; > > + break; > > + > > + case 4100000: > > + val = AXP717_CHRG_CV_4_1V; > > + break; > > + > > + case 4200000: > > + val = AXP717_CHRG_CV_4_2V; > > + break; > > + > > + default: > > + /* > > + * AXP717 can go up to 4.35, 4.4, and 5.0 volts which > > + * seem too high for lithium batteries, so do not allow. > > + */ > > + return -EINVAL; > > + } > > + > > + return regmap_update_bits(axp20x_batt->regmap, > > + AXP717_CV_CHG_SET, > > + AXP717_CHRG_CV_VOLT_MASK, val); > > +} > > + > > static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > > int charge_current) > > { > > @@ -404,6 +696,24 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, > > AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); > > } > > > > +static int axp717_set_constant_charge_current(struct axp20x_batt_ps *axp, > > + int charge_current) > > +{ > > + int val; > > + > > + if (charge_current > axp->max_ccc) > > + return -EINVAL; > > + > > + if (charge_current > AXP717_BAT_CC_MAX_UA || charge_current < 0) > > + return -EINVAL; > > + > > + val = (charge_current - axp->data->ccc_offset) / > > + axp->data->ccc_scale; > > + > > + return regmap_update_bits(axp->regmap, AXP717_ICC_CHG_SET, > > + AXP717_ICC_CHARGER_LIM, val); > > +} > > + > > static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, > > int charge_current) > > { > > @@ -448,6 +758,19 @@ static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > > AXP20X_V_OFF_MASK, val1); > > } > > > > +static int axp717_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, > > + int min_voltage) > > +{ > > + int val1 = (min_voltage - AXP717_BAT_VMIN_MIN_UV) / AXP717_BAT_VMIN_STEP; > > + > > + if (val1 < 0 || val1 > AXP717_V_OFF_MASK) > > + return -EINVAL; > > + > > + return regmap_update_bits(axp_batt->regmap, > > + AXP717_VSYS_V_POWEROFF, > > + AXP717_V_OFF_MASK, val1); > > +} > > + > > static int axp20x_battery_set_prop(struct power_supply *psy, > > enum power_supply_property psp, > > const union power_supply_propval *val) > > @@ -484,6 +807,42 @@ static int axp20x_battery_set_prop(struct power_supply *psy, > > } > > } > > > > +static int axp717_battery_set_prop(struct power_supply *psy, > > + enum power_supply_property psp, > > + const union power_supply_propval *val) > > +{ > > + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); > > + > > + switch (psp) { > > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: > > + return axp717_set_voltage_min_design(axp20x_batt, val->intval); > > + > > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: > > + return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval); > > + > > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: > > + return axp717_set_constant_charge_current(axp20x_batt, > > + val->intval); > > + case POWER_SUPPLY_PROP_STATUS: > > + switch (val->intval) { > > + case POWER_SUPPLY_STATUS_CHARGING: > > + return regmap_update_bits(axp20x_batt->regmap, > > + AXP717_MODULE_EN_CONTROL_2, > > + AXP717_CHRG_ENABLE, > > + AXP717_CHRG_ENABLE); > > + > > + case POWER_SUPPLY_STATUS_DISCHARGING: > > + case POWER_SUPPLY_STATUS_NOT_CHARGING: > > + return regmap_update_bits(axp20x_batt->regmap, > > + AXP717_MODULE_EN_CONTROL_2, > > + AXP717_CHRG_ENABLE, 0); > > + } > > + fallthrough; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > static enum power_supply_property axp20x_battery_props[] = { > > POWER_SUPPLY_PROP_PRESENT, > > POWER_SUPPLY_PROP_ONLINE, > > @@ -498,6 +857,20 @@ static enum power_supply_property axp20x_battery_props[] = { > > POWER_SUPPLY_PROP_CAPACITY, > > }; > > > > +static enum power_supply_property axp717_battery_props[] = { > > + POWER_SUPPLY_PROP_PRESENT, > > + POWER_SUPPLY_PROP_ONLINE, > > + POWER_SUPPLY_PROP_STATUS, > > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > > + POWER_SUPPLY_PROP_CURRENT_NOW, > > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, > > + POWER_SUPPLY_PROP_HEALTH, > > + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, > > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, > > + POWER_SUPPLY_PROP_CAPACITY, > > + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, > > +}; > > + > > static int axp20x_battery_prop_writeable(struct power_supply *psy, > > enum power_supply_property psp) > > { > > @@ -508,7 +881,16 @@ static int axp20x_battery_prop_writeable(struct power_supply *psy, > > psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > > } > > > > -static const struct power_supply_desc axp20x_batt_ps_desc = { > > +static int axp717_battery_prop_writeable(struct power_supply *psy, > > + enum power_supply_property psp) > > +{ > > + return psp == POWER_SUPPLY_PROP_STATUS || > > + psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || > > + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || > > + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; > > +} > > + > > +static const struct power_supply_desc axp209_batt_ps_desc = { > > .name = "axp20x-battery", > > .type = POWER_SUPPLY_TYPE_BATTERY, > > .properties = axp20x_battery_props, > > @@ -518,27 +900,159 @@ static const struct power_supply_desc axp20x_batt_ps_desc = { > > .set_property = axp20x_battery_set_prop, > > }; > > > > +static const struct power_supply_desc axp717_batt_ps_desc = { > > + .name = "axp20x-battery", > > + .type = POWER_SUPPLY_TYPE_BATTERY, > > + .properties = axp717_battery_props, > > + .num_properties = ARRAY_SIZE(axp717_battery_props), > > + .property_is_writeable = axp717_battery_prop_writeable, > > + .get_property = axp717_battery_get_prop, > > + .set_property = axp717_battery_set_prop, > > +}; > > + > > +static int axp209_bat_cfg_iio_channels(struct platform_device *pdev, > > + struct axp20x_batt_ps *axp_batt) > > +{ > > + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > > + if (IS_ERR(axp_batt->batt_v)) { > > + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) > > + return -EPROBE_DEFER; > > + return PTR_ERR(axp_batt->batt_v); > > + } > > + > > + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > > + "batt_chrg_i"); > > + if (IS_ERR(axp_batt->batt_chrg_i)) { > > + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) > > + return -EPROBE_DEFER; > > + return PTR_ERR(axp_batt->batt_chrg_i); > > + } > > + > > + axp_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > > + "batt_dischrg_i"); > > + if (IS_ERR(axp_batt->batt_dischrg_i)) { > > + if (PTR_ERR(axp_batt->batt_dischrg_i) == -ENODEV) > > + return -EPROBE_DEFER; > > + return PTR_ERR(axp_batt->batt_dischrg_i); > > + } > > + > > + return 0; > > +} > > + > > +static int axp717_bat_cfg_iio_channels(struct platform_device *pdev, > > + struct axp20x_batt_ps *axp_batt) > > +{ > > + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > > + if (IS_ERR(axp_batt->batt_v)) { > > + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) > > + return -EPROBE_DEFER; > > + return PTR_ERR(axp_batt->batt_v); > > + } > > + > > + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > > + "batt_chrg_i"); > > + if (IS_ERR(axp_batt->batt_chrg_i)) { > > + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) > > + return -EPROBE_DEFER; > > + return PTR_ERR(axp_batt->batt_chrg_i); > > + } > > + > > + return 0; > > +} > > + > > +static void axp209_set_battery_info(struct platform_device *pdev, > > + struct axp20x_batt_ps *axp_batt, > > + struct power_supply_battery_info *info) > > +{ > > + int vmin = info->voltage_min_design_uv; > > + int ccc = info->constant_charge_current_max_ua; > > + > > + if (vmin > 0 && axp20x_set_voltage_min_design(axp_batt, vmin)) > > + dev_err(&pdev->dev, > > + "couldn't set voltage_min_design\n"); > > + > > + /* Set max to unverified value to be able to set CCC */ > > + axp_batt->max_ccc = ccc; > > + > > + if (ccc <= 0 || axp20x_set_constant_charge_current(axp_batt, ccc)) { > > + dev_err(&pdev->dev, > > + "couldn't set ccc from DT: fallback to min value\n"); > > + ccc = 300000; > > + axp_batt->max_ccc = ccc; > > + axp20x_set_constant_charge_current(axp_batt, ccc); > > + } > > +} > > + > > +static void axp717_set_battery_info(struct platform_device *pdev, > > + struct axp20x_batt_ps *axp_batt, > > + struct power_supply_battery_info *info) > > +{ > > + int vmin = info->voltage_min_design_uv; > > + int vmax = info->voltage_max_design_uv; > > + int ccc = info->constant_charge_current_max_ua; > > + int val; > > + > > + if (vmin > 0 && axp717_set_voltage_min_design(axp_batt, vmin)) > > + dev_err(&pdev->dev, > > + "couldn't set voltage_min_design\n"); > > + > > + if (vmax > 0 && axp717_battery_set_max_voltage(axp_batt, vmax)) > > + dev_err(&pdev->dev, > > + "couldn't set voltage_max_design\n"); > > + > > + axp717_get_constant_charge_current(axp_batt, &val); > > + axp_batt->max_ccc = ccc; > > + if (ccc <= 0 || axp717_set_constant_charge_current(axp_batt, ccc)) { > > + dev_err(&pdev->dev, > > + "couldn't set ccc from DT: current ccc is %d\n", > > + val); > > + } > > +} > > + > > static const struct axp_data axp209_data = { > > .ccc_scale = 100000, > > .ccc_offset = 300000, > > + .bat_ps_desc = &axp209_batt_ps_desc, > > .get_max_voltage = axp20x_battery_get_max_voltage, > > .set_max_voltage = axp20x_battery_set_max_voltage, > > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > > + .set_bat_info = axp209_set_battery_info, > > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > > }; > > > > static const struct axp_data axp221_data = { > > .ccc_scale = 150000, > > .ccc_offset = 300000, > > .has_fg_valid = true, > > + .bat_ps_desc = &axp209_batt_ps_desc, > > .get_max_voltage = axp22x_battery_get_max_voltage, > > .set_max_voltage = axp22x_battery_set_max_voltage, > > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > > + .set_bat_info = axp209_set_battery_info, > > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > > +}; > > + > > +static const struct axp_data axp717_data = { > > + .ccc_scale = 64000, > > + .ccc_offset = 0, > > + .bat_ps_desc = &axp717_batt_ps_desc, > > + .get_max_voltage = axp717_battery_get_max_voltage, > > + .set_max_voltage = axp717_battery_set_max_voltage, > > + .cfg_iio_chan = axp717_bat_cfg_iio_channels, > > + .set_bat_info = axp717_set_battery_info, > > + .get_constant_chg_cur = axp717_get_constant_charge_current, > > }; > > > > static const struct axp_data axp813_data = { > > .ccc_scale = 200000, > > .ccc_offset = 200000, > > .has_fg_valid = true, > > + .bat_ps_desc = &axp209_batt_ps_desc, > > .get_max_voltage = axp813_battery_get_max_voltage, > > .set_max_voltage = axp20x_battery_set_max_voltage, > > + .cfg_iio_chan = axp209_bat_cfg_iio_channels, > > + .set_bat_info = axp209_set_battery_info, > > + .get_constant_chg_cur = axp20x_get_constant_charge_current, > > }; > > > > static const struct of_device_id axp20x_battery_ps_id[] = { > > @@ -548,6 +1062,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { > > }, { > > .compatible = "x-powers,axp221-battery-power-supply", > > .data = (void *)&axp221_data, > > + }, { > > + .compatible = "x-powers,axp717-battery-power-supply", > > + .data = (void *)&axp717_data, > > }, { > > .compatible = "x-powers,axp813-battery-power-supply", > > .data = (void *)&axp813_data, > > @@ -561,6 +1078,7 @@ static int axp20x_power_probe(struct platform_device *pdev) > > struct power_supply_config psy_cfg = {}; > > struct power_supply_battery_info *info; > > struct device *dev = &pdev->dev; > > + int ret; > > > > if (!of_device_is_available(pdev->dev.of_node)) > > return -ENODEV; > > @@ -572,29 +1090,6 @@ static int axp20x_power_probe(struct platform_device *pdev) > > > > axp20x_batt->dev = &pdev->dev; > > > > - axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); > > - if (IS_ERR(axp20x_batt->batt_v)) { > > - if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) > > - return -EPROBE_DEFER; > > - return PTR_ERR(axp20x_batt->batt_v); > > - } > > - > > - axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, > > - "batt_chrg_i"); > > - if (IS_ERR(axp20x_batt->batt_chrg_i)) { > > - if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) > > - return -EPROBE_DEFER; > > - return PTR_ERR(axp20x_batt->batt_chrg_i); > > - } > > - > > - axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, > > - "batt_dischrg_i"); > > - if (IS_ERR(axp20x_batt->batt_dischrg_i)) { > > - if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) > > - return -EPROBE_DEFER; > > - return PTR_ERR(axp20x_batt->batt_dischrg_i); > > - } > > - > > axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); > > platform_set_drvdata(pdev, axp20x_batt); > > > > @@ -603,8 +1098,12 @@ static int axp20x_power_probe(struct platform_device *pdev) > > > > axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev); > > > > + ret = axp20x_batt->data->cfg_iio_chan(pdev, axp20x_batt); > > + if (ret) > > + return ret; > > + > > axp20x_batt->batt = devm_power_supply_register(&pdev->dev, > > - &axp20x_batt_ps_desc, > > + axp20x_batt->data->bat_ps_desc, > > &psy_cfg); > > if (IS_ERR(axp20x_batt->batt)) { > > dev_err(&pdev->dev, "failed to register power supply: %ld\n", > > @@ -613,33 +1112,16 @@ static int axp20x_power_probe(struct platform_device *pdev) > > } > > > > if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { > > - int vmin = info->voltage_min_design_uv; > > - int ccc = info->constant_charge_current_max_ua; > > - > > - if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, > > - vmin)) > > - dev_err(&pdev->dev, > > - "couldn't set voltage_min_design\n"); > > - > > - /* Set max to unverified value to be able to set CCC */ > > - axp20x_batt->max_ccc = ccc; > > - > > - if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, > > - ccc)) { > > - dev_err(&pdev->dev, > > - "couldn't set constant charge current from DT: fallback to minimum value\n"); > > - ccc = 300000; > > - axp20x_batt->max_ccc = ccc; > > - axp20x_set_constant_charge_current(axp20x_batt, ccc); > > - } > > + axp20x_batt->data->set_bat_info(pdev, axp20x_batt, info); > > + power_supply_put_battery_info(axp20x_batt->batt, info); > > } > > > > /* > > * Update max CCC to a valid value if battery info is present or set it > > * to current register value by default. > > */ > > - axp20x_get_constant_charge_current(axp20x_batt, > > - &axp20x_batt->max_ccc); > > + axp20x_batt->data->get_constant_chg_cur(axp20x_batt, > > + &axp20x_batt->max_ccc); > > > > return 0; > > } > > -- > > 2.34.1 > > Thank you, Chris
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c index 6ac5c80cfda2..f09a56948642 100644 --- a/drivers/power/supply/axp20x_battery.c +++ b/drivers/power/supply/axp20x_battery.c @@ -32,9 +32,19 @@ #include <linux/mfd/axp20x.h> #define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2) +#define AXP717_PWR_STATUS_MASK GENMASK(6, 5) +#define AXP717_PWR_STATUS_BAT_STANDBY (0 << 5) +#define AXP717_PWR_STATUS_BAT_CHRG (1 << 5) +#define AXP717_PWR_STATUS_BAT_DISCHRG (2 << 5) #define AXP20X_PWR_OP_BATT_PRESENT BIT(5) #define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3) +#define AXP717_PWR_OP_BATT_PRESENT BIT(3) + +#define AXP717_BATT_PMU_FAULT_MASK GENMASK(2, 0) +#define AXP717_BATT_UVLO_2_5V (1 << 2) +#define AXP717_BATT_OVER_TEMP (1 << 1) +#define AXP717_BATT_UNDER_TEMP (1 << 0) #define AXP209_FG_PERCENT GENMASK(6, 0) #define AXP22X_FG_VALID BIT(7) @@ -49,20 +59,50 @@ #define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5) #define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5) +#define AXP717_CHRG_ENABLE BIT(1) +#define AXP717_CHRG_CV_VOLT_MASK GENMASK(2, 0) +#define AXP717_CHRG_CV_4_0V 0 +#define AXP717_CHRG_CV_4_1V 1 +#define AXP717_CHRG_CV_4_2V 2 +#define AXP717_CHRG_CV_4_35V 3 +#define AXP717_CHRG_CV_4_4V 4 +/* Values 5 and 6 reserved. */ +#define AXP717_CHRG_CV_5_0V 7 + #define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5) #define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0) +#define AXP717_ICC_CHARGER_LIM GENMASK(5, 0) + +#define AXP717_ITERM_CHG_LIM GENMASK(3, 0) +#define AXP717_ITERM_CC_STEP 64000 #define AXP20X_V_OFF_MASK GENMASK(2, 0) +#define AXP717_V_OFF_MASK GENMASK(6, 4) + +#define AXP717_BAT_VMIN_MIN_UV 2600000 +#define AXP717_BAT_VMIN_MAX_UV 3300000 +#define AXP717_BAT_VMIN_STEP 100000 +#define AXP717_BAT_CV_MIN_UV 4000000 +#define AXP717_BAT_CV_MAX_UV 5000000 +#define AXP717_BAT_CC_MIN_UA 0 +#define AXP717_BAT_CC_MAX_UA 3008000 struct axp20x_batt_ps; struct axp_data { - int ccc_scale; - int ccc_offset; - bool has_fg_valid; + int ccc_scale; + int ccc_offset; + bool has_fg_valid; + const struct power_supply_desc *bat_ps_desc; int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val); int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val); + int (*cfg_iio_chan)(struct platform_device *pdev, + struct axp20x_batt_ps *axp_batt); + void (*set_bat_info)(struct platform_device *pdev, + struct axp20x_batt_ps *axp_batt, + struct power_supply_battery_info *info); + int (*get_constant_chg_cur)(struct axp20x_batt_ps *axp, int *val); }; struct axp20x_batt_ps { @@ -135,6 +175,41 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, return 0; } +static int axp717_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, + int *val) +{ + int ret, reg; + + ret = regmap_read(axp20x_batt->regmap, AXP717_CV_CHG_SET, ®); + if (ret) + return ret; + + switch (reg & AXP717_CHRG_CV_VOLT_MASK) { + case AXP717_CHRG_CV_4_0V: + *val = 4000000; + break; + case AXP717_CHRG_CV_4_1V: + *val = 4100000; + break; + case AXP717_CHRG_CV_4_2V: + *val = 4200000; + break; + case AXP717_CHRG_CV_4_35V: + *val = 4350000; + break; + case AXP717_CHRG_CV_4_4V: + *val = 4400000; + break; + case AXP717_CHRG_CV_5_0V: + *val = 5000000; + break; + default: + return -EINVAL; + } + + return 0; +} + static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt, int *val) { @@ -180,6 +255,22 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp, return 0; } +static int axp717_get_constant_charge_current(struct axp20x_batt_ps *axp, + int *val) +{ + int ret; + + ret = regmap_read(axp->regmap, AXP717_ICC_CHG_SET, val); + if (ret) + return ret; + + *val &= AXP717_ICC_CHARGER_LIM; + + *val = *val * axp->data->ccc_scale; + + return 0; +} + static int axp20x_battery_get_prop(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -332,6 +423,178 @@ static int axp20x_battery_get_prop(struct power_supply *psy, return 0; } +static int axp717_battery_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); + int ret = 0, reg; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_ONLINE: + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, + ®); + if (ret) + return ret; + + val->intval = !!(reg & AXP717_PWR_OP_BATT_PRESENT); + break; + + case POWER_SUPPLY_PROP_STATUS: + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_STATUS_2, + ®); + if (ret) + return ret; + + switch (reg & AXP717_PWR_STATUS_MASK) { + case AXP717_PWR_STATUS_BAT_STANDBY: + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + + case AXP717_PWR_STATUS_BAT_CHRG: + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + + case AXP717_PWR_STATUS_BAT_DISCHRG: + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + + default: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + } + + break; + + /* + * If a fault is detected it must also be cleared; if the + * condition persists it should reappear (This is an + * assumption, it's actually not documented). A restart was + * not sufficient to clear the bit in testing despite the + * register listed as POR. + */ + case POWER_SUPPLY_PROP_HEALTH: + ret = regmap_read(axp20x_batt->regmap, AXP717_PMU_FAULT, + ®); + if (ret) + return ret; + + switch (reg & AXP717_BATT_PMU_FAULT_MASK) { + case AXP717_BATT_UVLO_2_5V: + val->intval = POWER_SUPPLY_HEALTH_DEAD; + regmap_update_bits(axp20x_batt->regmap, + AXP717_PMU_FAULT, + AXP717_BATT_UVLO_2_5V, + AXP717_BATT_UVLO_2_5V); + break; + + case AXP717_BATT_OVER_TEMP: + val->intval = POWER_SUPPLY_HEALTH_HOT; + regmap_update_bits(axp20x_batt->regmap, + AXP717_PMU_FAULT, + AXP717_BATT_OVER_TEMP, + AXP717_BATT_OVER_TEMP); + break; + + case AXP717_BATT_UNDER_TEMP: + val->intval = POWER_SUPPLY_HEALTH_COLD; + regmap_update_bits(axp20x_batt->regmap, + AXP717_PMU_FAULT, + AXP717_BATT_UNDER_TEMP, + AXP717_BATT_UNDER_TEMP); + break; + + default: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + } + + break; + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + ret = axp717_get_constant_charge_current(axp20x_batt, + &val->intval); + if (ret) + return ret; + break; + + case POWER_SUPPLY_PROP_CURRENT_NOW: + /* + * The offset of this value is currently unknown and is + * not documented in the datasheet. Based on + * observation it's assumed to be somewhere around + * 450ma. I will leave the value raw for now. + */ + ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval); + if (ret) + return ret; + /* IIO framework gives mA but Power Supply framework gives uA */ + val->intval *= 1000; + break; + + case POWER_SUPPLY_PROP_CAPACITY: + /* When no battery is present, return capacity is 100% */ + ret = regmap_read(axp20x_batt->regmap, AXP717_ON_INDICATE, + ®); + if (ret) + return ret; + + if (!(reg & AXP717_PWR_OP_BATT_PRESENT)) { + val->intval = 100; + return 0; + } + + ret = regmap_read(axp20x_batt->regmap, + AXP717_BATT_PERCENT_DATA, ®); + if (ret) + return ret; + + /* + * Fuel Gauge data takes 7 bits but the stored value seems to be + * directly the raw percentage without any scaling to 7 bits. + */ + val->intval = reg & AXP209_FG_PERCENT; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + return axp20x_batt->data->get_max_voltage(axp20x_batt, + &val->intval); + + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + ret = regmap_read(axp20x_batt->regmap, + AXP717_VSYS_V_POWEROFF, ®); + if (ret) + return ret; + + val->intval = AXP717_BAT_VMIN_MIN_UV + AXP717_BAT_VMIN_STEP * + (reg & AXP717_V_OFF_MASK); + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + ret = iio_read_channel_processed(axp20x_batt->batt_v, + &val->intval); + if (ret) + return ret; + + /* IIO framework gives mV but Power Supply framework gives uV */ + val->intval *= 1000; + break; + + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: + ret = regmap_read(axp20x_batt->regmap, + AXP717_ITERM_CHG_SET, ®); + if (ret) + return ret; + + val->intval = (reg & AXP717_ITERM_CHG_LIM) * AXP717_ITERM_CC_STEP; + break; + + default: + return -EINVAL; + } + + return 0; +} + static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, int val) { @@ -388,6 +651,35 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, AXP20X_CHRG_CTRL1_TGT_VOLT, val); } +static int axp717_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt, + int val) +{ + switch (val) { + case 4000000: + val = AXP717_CHRG_CV_4_0V; + break; + + case 4100000: + val = AXP717_CHRG_CV_4_1V; + break; + + case 4200000: + val = AXP717_CHRG_CV_4_2V; + break; + + default: + /* + * AXP717 can go up to 4.35, 4.4, and 5.0 volts which + * seem too high for lithium batteries, so do not allow. + */ + return -EINVAL; + } + + return regmap_update_bits(axp20x_batt->regmap, + AXP717_CV_CHG_SET, + AXP717_CHRG_CV_VOLT_MASK, val); +} + static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, int charge_current) { @@ -404,6 +696,24 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt, AXP20X_CHRG_CTRL1_TGT_CURR, charge_current); } +static int axp717_set_constant_charge_current(struct axp20x_batt_ps *axp, + int charge_current) +{ + int val; + + if (charge_current > axp->max_ccc) + return -EINVAL; + + if (charge_current > AXP717_BAT_CC_MAX_UA || charge_current < 0) + return -EINVAL; + + val = (charge_current - axp->data->ccc_offset) / + axp->data->ccc_scale; + + return regmap_update_bits(axp->regmap, AXP717_ICC_CHG_SET, + AXP717_ICC_CHARGER_LIM, val); +} + static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp, int charge_current) { @@ -448,6 +758,19 @@ static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, AXP20X_V_OFF_MASK, val1); } +static int axp717_set_voltage_min_design(struct axp20x_batt_ps *axp_batt, + int min_voltage) +{ + int val1 = (min_voltage - AXP717_BAT_VMIN_MIN_UV) / AXP717_BAT_VMIN_STEP; + + if (val1 < 0 || val1 > AXP717_V_OFF_MASK) + return -EINVAL; + + return regmap_update_bits(axp_batt->regmap, + AXP717_VSYS_V_POWEROFF, + AXP717_V_OFF_MASK, val1); +} + static int axp20x_battery_set_prop(struct power_supply *psy, enum power_supply_property psp, const union power_supply_propval *val) @@ -484,6 +807,42 @@ static int axp20x_battery_set_prop(struct power_supply *psy, } } +static int axp717_battery_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + return axp717_set_voltage_min_design(axp20x_batt, val->intval); + + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval); + + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + return axp717_set_constant_charge_current(axp20x_batt, + val->intval); + case POWER_SUPPLY_PROP_STATUS: + switch (val->intval) { + case POWER_SUPPLY_STATUS_CHARGING: + return regmap_update_bits(axp20x_batt->regmap, + AXP717_MODULE_EN_CONTROL_2, + AXP717_CHRG_ENABLE, + AXP717_CHRG_ENABLE); + + case POWER_SUPPLY_STATUS_DISCHARGING: + case POWER_SUPPLY_STATUS_NOT_CHARGING: + return regmap_update_bits(axp20x_batt->regmap, + AXP717_MODULE_EN_CONTROL_2, + AXP717_CHRG_ENABLE, 0); + } + fallthrough; + default: + return -EINVAL; + } +} + static enum power_supply_property axp20x_battery_props[] = { POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_ONLINE, @@ -498,6 +857,20 @@ static enum power_supply_property axp20x_battery_props[] = { POWER_SUPPLY_PROP_CAPACITY, }; +static enum power_supply_property axp717_battery_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, +}; + static int axp20x_battery_prop_writeable(struct power_supply *psy, enum power_supply_property psp) { @@ -508,7 +881,16 @@ static int axp20x_battery_prop_writeable(struct power_supply *psy, psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; } -static const struct power_supply_desc axp20x_batt_ps_desc = { +static int axp717_battery_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_STATUS || + psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN || + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN || + psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX; +} + +static const struct power_supply_desc axp209_batt_ps_desc = { .name = "axp20x-battery", .type = POWER_SUPPLY_TYPE_BATTERY, .properties = axp20x_battery_props, @@ -518,27 +900,159 @@ static const struct power_supply_desc axp20x_batt_ps_desc = { .set_property = axp20x_battery_set_prop, }; +static const struct power_supply_desc axp717_batt_ps_desc = { + .name = "axp20x-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = axp717_battery_props, + .num_properties = ARRAY_SIZE(axp717_battery_props), + .property_is_writeable = axp717_battery_prop_writeable, + .get_property = axp717_battery_get_prop, + .set_property = axp717_battery_set_prop, +}; + +static int axp209_bat_cfg_iio_channels(struct platform_device *pdev, + struct axp20x_batt_ps *axp_batt) +{ + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); + if (IS_ERR(axp_batt->batt_v)) { + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp_batt->batt_v); + } + + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, + "batt_chrg_i"); + if (IS_ERR(axp_batt->batt_chrg_i)) { + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp_batt->batt_chrg_i); + } + + axp_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, + "batt_dischrg_i"); + if (IS_ERR(axp_batt->batt_dischrg_i)) { + if (PTR_ERR(axp_batt->batt_dischrg_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp_batt->batt_dischrg_i); + } + + return 0; +} + +static int axp717_bat_cfg_iio_channels(struct platform_device *pdev, + struct axp20x_batt_ps *axp_batt) +{ + axp_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); + if (IS_ERR(axp_batt->batt_v)) { + if (PTR_ERR(axp_batt->batt_v) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp_batt->batt_v); + } + + axp_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, + "batt_chrg_i"); + if (IS_ERR(axp_batt->batt_chrg_i)) { + if (PTR_ERR(axp_batt->batt_chrg_i) == -ENODEV) + return -EPROBE_DEFER; + return PTR_ERR(axp_batt->batt_chrg_i); + } + + return 0; +} + +static void axp209_set_battery_info(struct platform_device *pdev, + struct axp20x_batt_ps *axp_batt, + struct power_supply_battery_info *info) +{ + int vmin = info->voltage_min_design_uv; + int ccc = info->constant_charge_current_max_ua; + + if (vmin > 0 && axp20x_set_voltage_min_design(axp_batt, vmin)) + dev_err(&pdev->dev, + "couldn't set voltage_min_design\n"); + + /* Set max to unverified value to be able to set CCC */ + axp_batt->max_ccc = ccc; + + if (ccc <= 0 || axp20x_set_constant_charge_current(axp_batt, ccc)) { + dev_err(&pdev->dev, + "couldn't set ccc from DT: fallback to min value\n"); + ccc = 300000; + axp_batt->max_ccc = ccc; + axp20x_set_constant_charge_current(axp_batt, ccc); + } +} + +static void axp717_set_battery_info(struct platform_device *pdev, + struct axp20x_batt_ps *axp_batt, + struct power_supply_battery_info *info) +{ + int vmin = info->voltage_min_design_uv; + int vmax = info->voltage_max_design_uv; + int ccc = info->constant_charge_current_max_ua; + int val; + + if (vmin > 0 && axp717_set_voltage_min_design(axp_batt, vmin)) + dev_err(&pdev->dev, + "couldn't set voltage_min_design\n"); + + if (vmax > 0 && axp717_battery_set_max_voltage(axp_batt, vmax)) + dev_err(&pdev->dev, + "couldn't set voltage_max_design\n"); + + axp717_get_constant_charge_current(axp_batt, &val); + axp_batt->max_ccc = ccc; + if (ccc <= 0 || axp717_set_constant_charge_current(axp_batt, ccc)) { + dev_err(&pdev->dev, + "couldn't set ccc from DT: current ccc is %d\n", + val); + } +} + static const struct axp_data axp209_data = { .ccc_scale = 100000, .ccc_offset = 300000, + .bat_ps_desc = &axp209_batt_ps_desc, .get_max_voltage = axp20x_battery_get_max_voltage, .set_max_voltage = axp20x_battery_set_max_voltage, + .cfg_iio_chan = axp209_bat_cfg_iio_channels, + .set_bat_info = axp209_set_battery_info, + .get_constant_chg_cur = axp20x_get_constant_charge_current, }; static const struct axp_data axp221_data = { .ccc_scale = 150000, .ccc_offset = 300000, .has_fg_valid = true, + .bat_ps_desc = &axp209_batt_ps_desc, .get_max_voltage = axp22x_battery_get_max_voltage, .set_max_voltage = axp22x_battery_set_max_voltage, + .cfg_iio_chan = axp209_bat_cfg_iio_channels, + .set_bat_info = axp209_set_battery_info, + .get_constant_chg_cur = axp20x_get_constant_charge_current, +}; + +static const struct axp_data axp717_data = { + .ccc_scale = 64000, + .ccc_offset = 0, + .bat_ps_desc = &axp717_batt_ps_desc, + .get_max_voltage = axp717_battery_get_max_voltage, + .set_max_voltage = axp717_battery_set_max_voltage, + .cfg_iio_chan = axp717_bat_cfg_iio_channels, + .set_bat_info = axp717_set_battery_info, + .get_constant_chg_cur = axp717_get_constant_charge_current, }; static const struct axp_data axp813_data = { .ccc_scale = 200000, .ccc_offset = 200000, .has_fg_valid = true, + .bat_ps_desc = &axp209_batt_ps_desc, .get_max_voltage = axp813_battery_get_max_voltage, .set_max_voltage = axp20x_battery_set_max_voltage, + .cfg_iio_chan = axp209_bat_cfg_iio_channels, + .set_bat_info = axp209_set_battery_info, + .get_constant_chg_cur = axp20x_get_constant_charge_current, }; static const struct of_device_id axp20x_battery_ps_id[] = { @@ -548,6 +1062,9 @@ static const struct of_device_id axp20x_battery_ps_id[] = { }, { .compatible = "x-powers,axp221-battery-power-supply", .data = (void *)&axp221_data, + }, { + .compatible = "x-powers,axp717-battery-power-supply", + .data = (void *)&axp717_data, }, { .compatible = "x-powers,axp813-battery-power-supply", .data = (void *)&axp813_data, @@ -561,6 +1078,7 @@ static int axp20x_power_probe(struct platform_device *pdev) struct power_supply_config psy_cfg = {}; struct power_supply_battery_info *info; struct device *dev = &pdev->dev; + int ret; if (!of_device_is_available(pdev->dev.of_node)) return -ENODEV; @@ -572,29 +1090,6 @@ static int axp20x_power_probe(struct platform_device *pdev) axp20x_batt->dev = &pdev->dev; - axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v"); - if (IS_ERR(axp20x_batt->batt_v)) { - if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV) - return -EPROBE_DEFER; - return PTR_ERR(axp20x_batt->batt_v); - } - - axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev, - "batt_chrg_i"); - if (IS_ERR(axp20x_batt->batt_chrg_i)) { - if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV) - return -EPROBE_DEFER; - return PTR_ERR(axp20x_batt->batt_chrg_i); - } - - axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev, - "batt_dischrg_i"); - if (IS_ERR(axp20x_batt->batt_dischrg_i)) { - if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV) - return -EPROBE_DEFER; - return PTR_ERR(axp20x_batt->batt_dischrg_i); - } - axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL); platform_set_drvdata(pdev, axp20x_batt); @@ -603,8 +1098,12 @@ static int axp20x_power_probe(struct platform_device *pdev) axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev); + ret = axp20x_batt->data->cfg_iio_chan(pdev, axp20x_batt); + if (ret) + return ret; + axp20x_batt->batt = devm_power_supply_register(&pdev->dev, - &axp20x_batt_ps_desc, + axp20x_batt->data->bat_ps_desc, &psy_cfg); if (IS_ERR(axp20x_batt->batt)) { dev_err(&pdev->dev, "failed to register power supply: %ld\n", @@ -613,33 +1112,16 @@ static int axp20x_power_probe(struct platform_device *pdev) } if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) { - int vmin = info->voltage_min_design_uv; - int ccc = info->constant_charge_current_max_ua; - - if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt, - vmin)) - dev_err(&pdev->dev, - "couldn't set voltage_min_design\n"); - - /* Set max to unverified value to be able to set CCC */ - axp20x_batt->max_ccc = ccc; - - if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt, - ccc)) { - dev_err(&pdev->dev, - "couldn't set constant charge current from DT: fallback to minimum value\n"); - ccc = 300000; - axp20x_batt->max_ccc = ccc; - axp20x_set_constant_charge_current(axp20x_batt, ccc); - } + axp20x_batt->data->set_bat_info(pdev, axp20x_batt, info); + power_supply_put_battery_info(axp20x_batt->batt, info); } /* * Update max CCC to a valid value if battery info is present or set it * to current register value by default. */ - axp20x_get_constant_charge_current(axp20x_batt, - &axp20x_batt->max_ccc); + axp20x_batt->data->get_constant_chg_cur(axp20x_batt, + &axp20x_batt->max_ccc); return 0; }