diff mbox series

[5/5] ARM: dts: qcom: Add support for MBG TM for pm8775 on SA8775P

Message ID 20240712-mbg-tm-support-v1-5-7d78bec920ca@quicinc.com (mailing list archive)
State New
Delegated to: Daniel Lezcano
Headers show
Series Add support for MBG Thermal monitoring device | expand

Commit Message

Satya Priya Kakitapalli July 12, 2024, 12:43 p.m. UTC
Add support for MBG TM peripheral for pm8775 sail pmics on SA8775P.

Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 120 ++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

Comments

Krzysztof Kozlowski July 12, 2024, 5:15 p.m. UTC | #1
On 12/07/2024 14:43, Satya Priya Kakitapalli wrote:
> Add support for MBG TM peripheral for pm8775 sail pmics on SA8775P.
> 
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching. For bindings, the preferred subjects are
explained here:
https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters

> ---
>  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 120 ++++++++++++++++++++++++++++
>  1 file changed, 120 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> index bd4f5f51e094..69910306885e 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> @@ -89,6 +89,62 @@ trip1 {
>  				};
>  			};
>  		};
> +
> +		pmm8654au_0_mbg_tm: pmm8654au_0_mbg_tz {

This wasn't ever tested and cannot work.

Please read your internal guideline before posting any more work. That
guideline you have is pretty detailed and offloads community from
pointing silly issues like - never testing.

> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pmm8654au_0_tz>;
> +

...

>  	pmm8654au_3: pmic@6 {
>  		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
>  		reg = <0x6 SPMI_USID>;
> @@ -317,4 +421,20 @@ pmm8654au_3_gpios: gpio@8800 {
>  			#interrupt-cells = <2>;
>  		};
>  	};
> +
> +	pmm8654au_sail_3: pmic@7 {
> +		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
> +		reg = <0x7 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pmm8654au_3_tz: qcom,mbg-tm@d700 {

Again: do you see anywhere node called "qcom,foo-bar"?



Best regards,
Krzysztof
Konrad Dybcio July 12, 2024, 7:43 p.m. UTC | #2
On 12.07.2024 2:43 PM, Satya Priya Kakitapalli wrote:
> Add support for MBG TM peripheral for pm8775 sail pmics on SA8775P.
> 
> Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 120 ++++++++++++++++++++++++++++
>  1 file changed, 120 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> index bd4f5f51e094..69910306885e 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
> @@ -89,6 +89,62 @@ trip1 {
>  				};
>  			};
>  		};
> +
> +		pmm8654au_0_mbg_tm: pmm8654au_0_mbg_tz {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;

0 is the default polling delay, you can drop this

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
index bd4f5f51e094..69910306885e 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
@@ -89,6 +89,62 @@  trip1 {
 				};
 			};
 		};
+
+		pmm8654au_0_mbg_tm: pmm8654au_0_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_0_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pmm8654au_1_mbg_tm: pmm8654au_1_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_1_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pmm8654au_2_mbg_tm: pmm8654au_2_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_2_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
+
+		pmm8654au_3_mbg_tm: pmm8654au_3_mbg_tz {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmm8654au_3_tz>;
+
+			trips {
+				trip0 {
+					temperature = <115000>;
+					hysteresis = <5000>;
+					type = "passive";
+				};
+			};
+		};
 	};
 
 	reboot-mode {
@@ -180,6 +236,22 @@  reboot_reason: reboot-reason@48 {
 		};
 	};
 
+	pmm8654au_sail_0: pmic@1 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_0_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_0_adc PM8775_ADC5_GEN3_DIE_TEMP(0)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x1 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
 	pmm8654au_1: pmic@2 {
 		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 		reg = <0x2 SPMI_USID>;
@@ -226,6 +298,22 @@  pmm8654au_1_gpios: gpio@8800 {
 		};
 	};
 
+	pmm8654au_sail_1: pmic@3 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_1_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_1_adc PM8775_ADC5_GEN3_DIE_TEMP(2)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x3 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
 	pmm8654au_2: pmic@4 {
 		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
@@ -272,6 +360,22 @@  pmm8654au_2_gpios: gpio@8800 {
 		};
 	};
 
+	pmm8654au_sail_2: pmic@5 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_2_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_2_adc PM8775_ADC5_GEN3_DIE_TEMP(4)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x5 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
 	pmm8654au_3: pmic@6 {
 		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
 		reg = <0x6 SPMI_USID>;
@@ -317,4 +421,20 @@  pmm8654au_3_gpios: gpio@8800 {
 			#interrupt-cells = <2>;
 		};
 	};
+
+	pmm8654au_sail_3: pmic@7 {
+		compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
+		reg = <0x7 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmm8654au_3_tz: qcom,mbg-tm@d700 {
+			compatible = "qcom,spmi-mgb-tm";
+			reg = <0xd700>;
+			io-channels = <&pmm8654au_3_adc PM8775_ADC5_GEN3_DIE_TEMP(6)>;
+			io-channel-names = "thermal";
+			interrupts-extended = <&spmi_bus 0x7 0xd7 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
 };