| Message ID | 20240728114200.75559-3-wahrenst@gmx.net (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | ARM: bcm2835: Implement initial S2Idle for Raspberry Pi | expand |
Hi Jassi, Am 28.07.24 um 13:41 schrieb Stefan Wahren: > During noirq suspend phase the Raspberry Pi power driver suffer of > firmware property timeouts. The reason is that the IRQ of the underlying > BCM2835 mailbox is disabled and rpi_firmware_property_list() will always > run into a timeout [1]. > > Since the VideoCore side isn't consider as a wakeup source, set the > IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled > during suspend-resume cycle. > > [1] > PM: late suspend of devices complete after 1.754 msecs > WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 > rpi_firmware_property_list+0x204/0x22c > Firmware transaction 0x00028001 timeout > Modules linked in: > CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 > Hardware name: BCM2835 > Call trace: > unwind_backtrace from show_stack+0x18/0x1c > show_stack from dump_stack_lvl+0x34/0x44 > dump_stack_lvl from __warn+0x88/0xec > __warn from warn_slowpath_fmt+0x7c/0xb0 > warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c > rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c > rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 > rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 > _genpd_power_off from genpd_sync_power_off+0x7c/0x11c > genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 > genpd_finish_suspend from dpm_run_callback+0x78/0xd0 > dpm_run_callback from device_suspend_noirq+0xc0/0x238 > device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 > dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac > suspend_devices_and_enter from pm_suspend+0x254/0x2e4 > pm_suspend from state_store+0xa8/0xd4 > state_store from kernfs_fop_write_iter+0x154/0x1a0 > kernfs_fop_write_iter from vfs_write+0x12c/0x184 > vfs_write from ksys_write+0x78/0xc0 > ksys_write from ret_fast_syscall+0x0/0x54 > Exception stack(0xcc93dfa8 to 0xcc93dff0) > [...] > PM: noirq suspend of devices complete after 3095.584 msecs > > Link: https://github.com/raspberrypi/firmware/issues/1894 > Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") > Signed-off-by: Stefan Wahren <wahrenst@gmx.net> > Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Are there any objections with this patch? I consider this solution as settled. Best regards > --- > drivers/mailbox/bcm2835-mailbox.c | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/drivers/mailbox/bcm2835-mailbox.c b/drivers/mailbox/bcm2835-mailbox.c > index fbfd0202047c..ea12fb8d2401 100644 > --- a/drivers/mailbox/bcm2835-mailbox.c > +++ b/drivers/mailbox/bcm2835-mailbox.c > @@ -145,7 +145,8 @@ static int bcm2835_mbox_probe(struct platform_device *pdev) > spin_lock_init(&mbox->lock); > > ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), > - bcm2835_mbox_irq, 0, dev_name(dev), mbox); > + bcm2835_mbox_irq, IRQF_NO_SUSPEND, dev_name(dev), > + mbox); > if (ret) { > dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n", > ret); > -- > 2.34.1 >
diff --git a/drivers/mailbox/bcm2835-mailbox.c b/drivers/mailbox/bcm2835-mailbox.c index fbfd0202047c..ea12fb8d2401 100644 --- a/drivers/mailbox/bcm2835-mailbox.c +++ b/drivers/mailbox/bcm2835-mailbox.c @@ -145,7 +145,8 @@ static int bcm2835_mbox_probe(struct platform_device *pdev) spin_lock_init(&mbox->lock); ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), - bcm2835_mbox_irq, 0, dev_name(dev), mbox); + bcm2835_mbox_irq, IRQF_NO_SUSPEND, dev_name(dev), + mbox); if (ret) { dev_err(dev, "Failed to register a mailbox IRQ handler: %d\n", ret);
During noirq suspend phase the Raspberry Pi power driver suffer of firmware property timeouts. The reason is that the IRQ of the underlying BCM2835 mailbox is disabled and rpi_firmware_property_list() will always run into a timeout [1]. Since the VideoCore side isn't consider as a wakeup source, set the IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled during suspend-resume cycle. [1] PM: late suspend of devices complete after 1.754 msecs WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128 rpi_firmware_property_list+0x204/0x22c Firmware transaction 0x00028001 timeout Modules linked in: CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x44 dump_stack_lvl from __warn+0x88/0xec __warn from warn_slowpath_fmt+0x7c/0xb0 warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0 rpi_firmware_set_power from _genpd_power_off+0xe4/0x148 _genpd_power_off from genpd_sync_power_off+0x7c/0x11c genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0 genpd_finish_suspend from dpm_run_callback+0x78/0xd0 dpm_run_callback from device_suspend_noirq+0xc0/0x238 device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168 dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac suspend_devices_and_enter from pm_suspend+0x254/0x2e4 pm_suspend from state_store+0xa8/0xd4 state_store from kernfs_fop_write_iter+0x154/0x1a0 kernfs_fop_write_iter from vfs_write+0x12c/0x184 vfs_write from ksys_write+0x78/0xc0 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xcc93dfa8 to 0xcc93dff0) [...] PM: noirq suspend of devices complete after 3095.584 msecs Link: https://github.com/raspberrypi/firmware/issues/1894 Fixes: 0bae6af6d704 ("mailbox: Enable BCM2835 mailbox support") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> --- drivers/mailbox/bcm2835-mailbox.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -- 2.34.1